If an IP address already exists when it is tried to be added to the
network interface, then just return it but update ref count if it was
not updated. This could happen if the address was added and then removed,
but for example an active connection was still using it and keeping the
ref count > 0. In this case we must update the ref count so that the IP
address is not removed if the connection is closed.
Fixes#85380
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Change default input format of the shield to RGB 565 to achieve
better frame rate performance.
Remove LV_Z_FLUSH_THREAD as temporary solution for flickering
screen issue when CPU go too high
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
Decouple dependency of CONFIG_NXP_WIFI_SOFTAP_SUPPORT.
Add wifi defconfig to set default kconfig options when soft AP
enabled.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Add support for wifi overrun count, beacon received and beacon missed
count.
Add support for wifi statistics clear.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
The mDNS probing is described in RFC 6762 chapter 8.1.
The code will send an unsolicited mDNS query to network and
will check if there are existing hosts with the same name.
If there are, then the mDNS responder will not respond to
queries it is configured to use.
Fixes#84333
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow user to specify the network interface where the query should
be sent, but only if the user has supplied the DNS servers in sockaddr
list. If user has specified a DNS servers in a string list, then the
possible network interface is taken from the string.
The reason for this is that it is not possible to add network interface
to the sockaddr list so an extra parameter is needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow user to specify socket service struct and port number so
that DNS servers specified in Kconfig etc are not used. This way
we can send a DNS query to arbitrary address without it affecting
the system configuration.
This is used in mDNS probing so that that mDNS responder can send
probe message and not change / configure system global DNS config.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Introduce dns_resolve_name_internal() that allows resolving a name
and not use DNS cache if caching is enabled.
This is needed in mDNS probing (RFC 6762 chapter 8.1) which needs
to send a mDNS query and not get any results from cache.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Commit does the following changes:
* Use functionality from the `babbelkit` library for common functions
related to flags, test progression (failing, passing etc.) and
synchronization between two devices. Locally defined equivalents are
removed.
* Removes the files containing only functionality that is provided
by the `babblekit` library.
* Remove the `test_pre_init_f` and `test_tick_f` functions (commonly
implemented as `test_init` and `test_tick`) from the modified tests.
These functions are not needed as they were only used to fail the test
if a device didn't complete the test within a certain time frame. This
is already handled by the `sim_length` argument used in the test
scripts.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Adds a macro returning a string representation of a Bluetooth address.
This allows you to print multiple addresses in a single printk or
LOG... call.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
To use openocd rtt shell in a non-Windows environment,
you need to turn off ICANON and ECHO.
Refer to pyocd to enable a temporary terminal and configure
it correctly.
Signed-off-by: Findlay Feng <i@fengch.me>
The Max flash size of the stm32H5 serie depends on the mcu device
from 256 to 1024 KB, in two banks.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Added support for the nucleo_wba55cg board to the uart/single_wire example.
- Updated the overlay file to configure USART2 and LPUART1 for single-wire
mode.
- Modified sample.yaml to include nucleo_wba55cg in the list of supported
boards.
- Updated README.rst to provide generic, board-agnostic instructions for
building and running the application.
Signed-off-by: Lubos Koudelka <lubos.koudelka@st.com>
Added the USART2 definition to the nucleo_wba55cg device tree source file.
This enables the use of USART2 on the nucleo_wba55cg board.
Signed-off-by: Lubos Koudelka <lubos.koudelka@st.com>
Rename *write_protection functions to *cr_lock, because it is not
enabling real write protection. It only blocks changing register
by software accidentally.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Building with clang warns:
drivers/sensor/st/lis2dw12/lis2dw12.c:194:23: error: unused
function 'sensor_ms2_to_mg' [-Werror,-Wunused-function]
static inline int32_t sensor_ms2_to_mg(const struct sensor_value *ms2)
^
Move the function to include/zephyr/drivers/sensor.h with the other
sensor_ms2_to* functions.
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
mimxrt1040_evk and twr_ke18f need board rework for trigger mode
so dts need changed to add gpio trigger
fixes: #85444
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Enable spi_flash sample for MAX32655FTHR and MAX32655EVKIT
which have an external Winbond W25Q128jv external flash.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
Signed-off-by: Rob Cornall <Rob.Cornall@analog.com>
Signed-off-by: Yasin Ustuner <Yasin.Ustuner@analog.com>
The code for checking for allocated BR/EDR PSMs was potentially resulting
in an integer overflow, due to doing a <= UINT16_MAX (0xffff) comparison
on a uint16_t variable. To avoid this, use a uint32_t variable internally.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Adds cyclic support, where a multi-block transfer is automatically
reloaded to the first block after the multi-block transfer completes.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Block_ts stores the number of transfers from DMA source, not the
transferred length in bytes.
Regression from 9c4cd3057d.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Added gpio expander pca6416 support on the board, it use i2c bus to
expand IO ports.
Added GPIO test case overlay for the board.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Added gpio expander pca6416 support on the board, it use i2c bus to
expand IO ports.
Added GPIO test case overlay for the board.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Building with clang warns:
subsys/net/lib/http/http_hpack.c:21:20: error: unused function
'http_hpack_key_is_dynamic' [-Werror,-Wunused-function]
static inline bool http_hpack_key_is_dynamic(uint32_t key)
^
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Building with clang warns:
drivers/sensor/st/iis2iclx/iis2iclx.c:68:19: error: unused function
'iis2iclx_reboot' [-Werror,-Wunused-function]
static inline int iis2iclx_reboot(const struct device *dev)
^
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Building with clang warns:
drivers/sensor/st/lsm9ds0_mfd/lsm9ds0_mfd.c:42:19: error: unused
function 'lsm9ds0_mfd_accel_set_odr_raw' [-Werror,-Wunused-function]
static inline int lsm9ds0_mfd_accel_set_odr_raw(const struct device *dev,
^
lsm9ds0_mfd_accel_set_odr_raw is only used by code that was guarded by
defined(CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_RUNTIME) in addition to
!defined(LSM9DS0_MFD_ACCEL_DISABLED).
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Building with clang warns:
drivers/sensor/st/lsm6dso/lsm6dso.c:89:19: error: unused function
'lsm6dso_reboot' [-Werror,-Wunused-function]
static inline int lsm6dso_reboot(const struct device *dev)
^
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Building with clang warns:
drivers/sensor/st/lsm6dso16is/lsm6dso16is.c:83:19: error: unused
function 'lsm6dso16is_reboot' [-Werror,-Wunused-function]
static inline int lsm6dso16is_reboot(const struct device *dev)
^
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Building with clang warns:
drivers/flash/spi_nor.c:306:20: error: unused function
'delay_until_exit_dpd_ok' [-Werror,-Wunused-function]
static inline void delay_until_exit_dpd_ok(const struct device *const dev)
^
delay_until_exit_dpd_ok is only used when ANY_INST_HAS_DPD is defined.
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
