The BLE acronym is not an official description of Bluetooth
LE, and the Bluetooth SIG only ever refers to it as Bluetooth
Low Energy or Bluetooth LE, so Zephyr should as well.
This commit does not change any board or vendor specific
documentation, and the term BLE may still be used in those.
It will be up to the vendors to update it if they want,
since many of them are using the term BLE in their
products.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Commit:
- adds dependency of the mbedtls psa usage on secure storage
- removes PSA ITS emulator and enables usage of
the secure storage in ble mesh bsim tests
- enables secure storage in all ble mesh and related samples
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
By using `SETTINGS_STATIC_HANDLER_DEFINE_WITH_CPRIO` we can ensure that
BT subsystems always get loaded after BT, and BT Mesh after both of
them.
This solves the host having to register a GATT service in a delayed
manner, as we are sure to now register the GATT service after sc_commit
sets `SC_LOAD`.
Signed-off-by: Kyra Lengfeld <kyra.lengfeld@nordicsemi.no>
Extending existing provisioning test code to use PB-GATT and adding
test cases for provisioning over PB-GATT. Test names are changed to
represent both provisioning brearers. Enabled required kconfigs for
PB-GATT and GATT proxy features in overlay_gatt.conf. Test argument
prov-bearer is added to provisioning tests to select bearer.
Following tests are renamed and extended to use PB-GATT
- pb_adv_multi
- pb_adv_no_oob
- pb_adv_oob_auth_ib_pk
- pb_adv_oob_auth_ignore_oob_pk
- pb_adv_oob_auth_oob_pk
- pb_adv_reprovision
PB-GATT test cases will run only with PSA encryption since tinycrypt
is to be deprecated.
Signed-off-by: alperen sener <alperen.sener@nordicsemi.no>
This adds a test that checks that the Subnet Bridge behaves correctly
when one or more of the involved subnets are undergoing the Key Refresh
Procedure.
Signed-off-by: Ludvig Jordet <ludvig.jordet@nordicsemi.no>
This introduces a global variable controlling the number of remote nodes
used in a given test case. This allows removal of the `TEST_TYPE_...`
enums and further tests in the future that can use different remote node
counts.
This also cleans up the test source by extracting common tester
initialization to separate functions, avoiding repetition.
Signed-off-by: Ludvig Jordet <ludvig.jordet@nordicsemi.no>
Increase the number of key slots in the PSA Crypto core
for some tests using more keys than the default (16).
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Since the TinyCrypt library is being deprecated in Zephyr, this
commit set TinyCrypt usage in BT mesh as deprecated and it sets
Mbed TLS PSA Crypto API as the default option (when TF-M is not
available).
Tests are also updated in this commit.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
CONFIG_BT_USE_PSA_API was used in BT crypto/host modules to select
PSA crypto API over TinyCrypt (which was the default until now).
Since TinyCrypt is being deprecated and PSA crypto API is the new
standard library for crypto operations, CONFIG_BT_USE_PSA_API is
no more needed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Adding new CONFIG_MBEDTLS_PSA_KEY_SLOT_COUNT to select the number
of key slots in PSA Crypto core. The default value is 16. Be aware
that key slots consume RAM memory even if unused, so the proper value
should be a compromise between the number of slots required by
the application and the available RAM in the system.
This commit also:
- updates tests/crypto/secp256r1/mbedtls.conf to showcase how to
use this new symbol to reduce RAM footprint.
- tests/bsim/bluetooth/mesh/overlay_psa.conf to support all the
keys used in the test.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Adds two new tests for the Subnet Bridge feature, testing group and
virtual addresses as destinations. The tests are based on the existing
`brg_simple.sh` test, with the addition of a new node and a new subnet
to make sure that messages are bridged to multiple subnets, but only
subnets that have a corresponding entry in the bridging table.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Renames `bt_mesh_test_send_ra` to `bt_mesh_test_send_data` and changes
the corresponding callback funciton as it is used outside of the replay
attack tests, and can be used to send custom data. The function is
extended to accept a UUID parameter to allow sending data to virtual
addresses.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
k_sleep may not be enough to let advertiser send the message. Instead we
should rely on the bt_mesh_send_cb.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds the `bt_mesh_brg_cfg` prefix to the public Subnet Bridge API, and
aligns the function and callback naming with the rest of the Bluetooth
Mesh API.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Removed deprecated native_posix as test platform.
Added unique sim_ids for tests with the psa as a overlay.
Fixed clang-format issues.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
This commit adds the following tests:
- Simple test for bridging table
- Test bridging table state changes
- Test persistence storage of subnet bridge
- Test IV Index update with subnet bridge
- Test network key removal for subnet bridge
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adding documentation and function calles for the API's
in Bridge Configuration Client model and Bridge
Configuration Server model.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
The `type` parameter of `struct bt_le_scan_param` is documented as
taking a `BT_LE_SCAN_TYPE_*` value, not a `BT_HCI_LE_SCAN_*` value.
In practice this makes no difference as the values are defined as the
same integer, but does result in `<zephyr/bluetooth/hci.h>` not needing
to be included.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Commit aligns usage mesh and host PSA.
Since PSA crypto is supported in host then
there is no reason to switch off some of host
features to get rid of tinycrypt functions in
the final image.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
It is not correctly to call Zephyr API from bsim
HW thread.
Commit moves friendship test suite semaphores
initialization into test bodies.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
This commit updates models metadata API to simplify the usage and
removes the metadata pointer in health server model context.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Commit adds optimization of blob and dfu models bsim tests.
1. Makes general transfer size and block size smaller for blob.
2. Makes waiting time shorter for some blob bsim tests.
3. Splits long dfu srv persistence test suite into two.
4. Reduces retransmission for unicast messages till zero
for blob and dfu tests.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The commit adds dependency on Kconfig FLASH_PAGE_LAYOUT to subsystems
that really require it:
FCB, NVS, LittleFS
and removes direct selection from '*.conf' files where no longer
needed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Let's increase the timeout for a few tests whose
timeout is less than 3x a typical execution time in CI.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Remove the boilerplate which is not necessary beacuse
it is already provided by the common scripts
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In all scripts, where we were using the BOARD variable
let's use BOARD_TS which is the full BOARD target string
with "/" replaced with "_"
This is neccessary to support hwmv2 board names
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
One of these tests has been seen failing in older slower
computers due to timeouts, let's increase the timeout so
we don't break in those cases.
Note this timeout is just a safety to eventually kill
hung simulations even if nobody presses Ctrl+C.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Commit adds const qualifier to models metadata.
Specification claims: Composition Metadata Page 0
shall not change during a term of a node on the network.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The stack manages to suspend the advertiser before it finishes
transmitting the Outbound PDU Report message to confirm the transmission
of a Provisioning PDU. The test requires the server to become
unresponsive when the Provisioning PDU is sent to the unprovisioned
device to test timeout of the provisioning protocol.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Now, when the deadlock is removed from `bt_mesh_adv_disable` function,
the advertiser can be disabled from the `bt_mesh_send_cb`
callbacks.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add a test that checks that both advertisers, the legacy and the
extended behaves identically when the stack is suspended, in particular:
- `bt_mesh_send_cb.end` callback is called with error code `0` for the
advertisement that the advertiser already pushed to the ble host
(called `bt_mesh_send_cb.start`),
- `bt_mesh_send_cb.start` callback with error `-ENODEV` is called for
every advertisement that was pushed to the mesh advertiser using
`bt_mesh_adv_send` function before the stack was suspended,
- `bt_mesh_adv_create` returns NULL when attempting to create a new
advertisement while the stack is suspended.
The `bt_mesh_adv_disable` is called from the work because calling it
from the `bt_mesh_send_cb.start` callback will cause a deadlock.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This commit changes error code returned by `k_sem_take` when it times
out from `-EAGAIN` to `-ETIMEDOUT` because `bt_le_scan_start` also
returns `-EAGAIN` if bt device is not ready, which may lead to invalid
test behavior.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adjust mesh test timing and timeout value for Advertising
Extensions use/fix in Zephyr Controller. The scanning in
Zephyr Controller is delayed when using extended scanning.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
After removing 20ms in advertiser, all subnetwork beacons are sent as high
dense packet of frames with minimal distance between them. That might
cause collisions if beacon interval on devices will coincide.
This commit adds an artificial delay between each subnet advertsing
beacons.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
Bluetooth Mesh Protocol 1.1 is backward compatible with Bluetooth Mesh
Profile 1.0.1, therefore the stack can still be qualified for 1.0.1 if
needed. But explicit support for both versions requires additional
maintenance efforts and doubles the CI time. To make the stack
qualifiable for 1.0.1, the one needs to remove Private Beacons reception
and compile out SHA256 algorithm support.
What is changed:
- Removed `CONFIG_BT_MESH_V1d1` option.
- Removed `transport_legacy.c` which was using 1.0.1 implementation. The
new transport layer has new SaR logic that should still be possible to
qualify for 1.0.1.
- Removed the legacy transport Kconfig options. They are superseded by
the new transport Kconfig options.
- Tester app: `overlay-mesh-v1d1.conf` is merged into
`overlay-mesh.conf`.
- Removed BabbleSim tests for 1.0.1.
- Updated documentation.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Enable by default the access layer responses random delays.
Commit also adapts all mesh models, samples and
babblesim tests to use random delay functionality correctly.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Adds two test-cases to `test_suspend.c`, both checking that gatt
advertisement is stopped when suspending Mesh, and that is started again
when Mesh is resumed.
The first test-case involves suspending and resuming Mesh, and
the second test-case involves suspending Mesh and disabling Bluetooth,
then re-enabling Bluetooth and resuming Mesh.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Renames tx to DUT and rx to Tester to clarify roles in test.
Re-uses the same body for suspend/resume and suspend/disable/resume
for DUT with a parameter to toggle disabling BT.
Re-uses the same Tester config in both existing test-cases as the
previous configs were duplicates.
Updates the dut suspension status in the message handler.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Extracts logic related to waiting for packets from
`test_advertiser.c` and `test_beacon.c` to use in a sync mechanism.
Introduces a sync mechanism in bsim with the functions
`bt_mesh_test_send_over_adv` and `bt_mesh_test_wait_for_packet`
Extracts gatt-related logic from `test_advertiser.c` into a separate
file so it can be re-used.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
