Change adds bsim tests with CONFIG_BT_LONG_WQ=n to ensure correct
behavior. Change uses host/gatt/ccc_store test.
Change also switches to using more unique simulation ID in the test
scripts.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Change adds bsim tests with CONFIG_BT_LONG_WQ=n to ensure correct
behavior. Change uses host/security/ccc_update test.
Change also switches to using more unique simulation ID in the test
scripts.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
The BLE acronym is not an official description of Bluetooth
LE, and the Bluetooth SIG only ever refers to it as Bluetooth
Low Energy or Bluetooth LE, so Zephyr should as well.
This commit does not change any board or vendor specific
documentation, and the term BLE may still be used in those.
It will be up to the vendors to update it if they want,
since many of them are using the term BLE in their
products.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Commit does the following changes:
* Use functionality from the `babbelkit` library for common functions
related to flags, test progression (failing, passing etc.) and
synchronization between two devices. Locally defined equivalents are
removed.
* Removes the files containing only functionality that is provided
by the `babblekit` library.
* Remove the `test_pre_init_f` and `test_tick_f` functions (commonly
implemented as `test_init` and `test_tick`) from the modified tests.
These functions are not needed as they were only used to fail the test
if a device didn't complete the test within a certain time frame. This
is already handled by the `sim_length` argument used in the test
scripts.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Validate that the connection timeout code path works as expected when
the command buffer pool is under stress.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The goal of this test is to ensure that setting the device name by
writing to the GAP 'Device Name' characteristic work as expected.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
bt_gatt_find_by_uuid used bt_gatt_attr_value_handle but that
function only works to get the value handle of a characteristic
declaration, i.e. if the UUID is not BT_UUID_GATT_CHRC then it
would always return handle = 0. This meant that
bt_gatt_find_by_uuid would always use handle = 0 as the starting
handle for non-BT_UUID_GATT_CHRC attributes, instead of the handle
of the provided attr.
This was not an issue for any UUIDs that may only exist once on a
GATT server, which is most UUIDs, but for UUIDs like the
BT_UUID_TBS_* UUIDs that may be multiple instances of, it would
always return the first attribute rather than the one starting
from the provided start attr.
This commit also ensures that we do not overflow the `end_handle`
when adding 2 uint16_t values.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit deals mainly with bsim tests which have `common.c/h` files.
It does the following changes:
* Use functionality from the `babbelkit` library for common functions
related to flags, test progression (failing, passing etc.) and
synchronization between two devices. Locally defined equivalents are
removed.
* Remove the `common.c/h` containing only functionality that is provided
by the `babblekit` library.
* Remove the `test_pre_init_f` and `test_tick_f` functions (commonly
implemented as `test_init` and `test_tick`) from the modified tests.
These functions are not needed as they were only used to fail the test
if a device didn't complete the test within a certain time frame. This
is already handled by the `sim_length` argument used in the test
scripts.
* Changes use of `atol` to `strtol` as the prior is against Zephyr
coding guidelines.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Removed similar prj.conf files and added overlays instead to avoid
duplicate code.
Renamed some test files for consistency.
Signed-off-by: Stine Akredalen <stine.akredalen@nordicsemi.no>
Check that the GATT settings added when bonding to a peer and
subscribing to a CCC are correctly deleted when calling `bt_unpair`.
Testing hooks have been added in the Bluetooth settings abstraction
layer to know which key are being added/deleted.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Since now Mbed TLS automatically selects ENTROPY_GENERATOR (or the
test generator, depending on the platform) we can remove this dependency
from all BT related tests and samples.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Currently different test cases within the same folder are using largely the
same config files with only subtle variations. It is better instead to have
a base config file with general configuration, aided by overlay files for
specific cases.
Signed-off-by: Artur Dobrynin <artur.dobrynin@nordicsemi.no>
Bluetooth host bsim tests are compiled with shell scripts, but it is
possible to use twister, which supports compilation (but not running
at the moment). Compiling with twister requires fewer shell scripts,
provides cleaner interface and more flexible configuration.
Signed-off-by: Artur Dobrynin <artur.dobrynin@nordicsemi.no>
Default the Minimum encryption key size to 16.
Key with reduced size is easier to brut force.
Disable LE legacy pairing by default since it's not secure.
These defaults should suite majority of newly developed applications.
It's better to use sensible more secure defaults,
so applications that really need less secure option consciously change it,
not the other way around.
This may help to prevent downgrade attacks.
Signed-off-by: Sergey Korotkov <sergey.korotkov@nordicsemi.no>
CONFIG_BT_USE_PSA_API was used in BT crypto/host modules to select
PSA crypto API over TinyCrypt (which was the default until now).
Since TinyCrypt is being deprecated and PSA crypto API is the new
standard library for crypto operations, CONFIG_BT_USE_PSA_API is
no more needed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Because the number of ACL RX buffers must be at least the number of
maximum connections plus one, increasing `CONFIG_BT_MAX_CONN` could
inadvertently lead to a build failure if the number of ACL RX buffers is
not also increased. This dependency may not be obvious to users.
To address this issue, this commit deprecates the
`CONFIG_BT_BUF_RX_COUNT` Kconfig symbol and computes the value in
`buf.h` using the new `BT_BUF_RX_COUNT` define. Note that the default
value and the minimum range value have been changed to 0 to "disable"
the option.
Additionally, to allow users to increase the number of ACL RX buffers,
this commit introduces the new `CONFIG_BT_BUF_RX_COUNT_EXTRA` Kconfig
symbol. The value of this symbol will be added to the computed value of
`BT_BUF_RX_COUNT`.
The configurations of tests and samples have been updated to reflect
these changes.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Fix some test simulation length be greater than wait time.
These tests completed within 12 seconds, 15 second wait
time is a good value with included margin and a 20 second
simulation time.
These tests failed on this PR CI.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The main problem of MBEDTLS_PSA_CRYPTO_LEGACY_RNG is that it
brings in some legacy modules (entropy + ctr_drbg/hmac_drbg)
which means extra ROM/RAM footprint.
MBEDTLS_PSA_CRYPTO_EXTERNAL_RNG instead simply calls to the
CSPRNG which makes it definitely smaller.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
The alloc_buf callback is not used when `seg_recv` is set, so it is
never called in this test. Remove it.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Increase the EXECUTION_TIMEOUT (real time timeout at which the test
will be killed), so we have more margin for CI.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add conversion macros from milliseconds to various units.
The purpose of these macros is to make it more clear/easier
for users to set and read values using milliseconds rather
than the various BT units which may be in 0.625, 1.25 or 10ms
units.
This is especially useful when comparing related values using
different units, such as advertising interval (0.625ms units)
and periodic advertising interval units (1.25ms units).
Users will have to be aware that these macros can provide slightly
different values than what is provided, if the provided values
do not match the units.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Refactor the sample so that multiple advertising setup can
be reused in other sample if required. Bluetooth enable can
be in the sample that reuses the advertising setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The test implementation is based on a copy of the HFC multilink test.
The test verifies that the stack respects the reference counting of SDU
buffers when the L2CAP -EINPROGRESS feature is used.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Changed dependency of the BT_BAP_SCAN_DELEGATOR to GATT_DYNAMIC_DB
from 'select' to 'depends on' and solved all loop dependencies
caused by this change.
Fixes#79108
Signed-off-by: Babak Arisian <bbaa@demant.com>
The own_addr_type used for various HCI commands sometimes
had a BT_HCI_OWN_ADDR_* type value or a BT_ADDR_* type
value. Those are 2 different value spaces, and if the public
address types would ever change, it would start have incorrect
behavior.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The host-based adv auto-resume function has both a problematic
implementation and disagreement in the community around how it should
behave. See the issue linked resolved below for details.
This patch makes the deprecation visible to the user. The user will be
better served by a auto-resume tailored their applications use case,
based on more primitive host API like `conn_cb.recycled`, which has
obvious behavior that is unlikely to change.
Resolves: https://github.com/zephyrproject-rtos/zephyr/issues/72567
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Let's run tests with security/privacy with the HW models acutually
running the encryptions, so in case of missaligned keys
tests fail.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's run tests with security/privacy with the HW models acutually
running the encryptions, so in case of missaligned keys
tests fail.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's run tests with security/privacy with the HW models acutually
running the encryption, so in case of missaligned keys
tests fail.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's run tests with security/privacy with the HW models acutually
running the encryptions, so in case of missaligned keys
tests fail.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
More information in the test description.
Why: At the time of writing, this test exposes a bug in the Bluetooth stack
where all the RX buffers are in use, and the controller driver fails to
synchronously allocate a command response buffer.
This is manifested in an assertion failure in `hci_common.c`.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Adds coverage for attempting to connect while already connecting
or connecting to a device that already exists.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Move the network buffer header file from zephyr/net/buf.h to
zephyr/net_buf.h as the implementation now lives outside of the networking
subsystem.
Add (deprecated) zephyr/net/buf.h header to maintain compatibility with old
file path.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
To make the scanner module more understandable and more streamlined, I
reworked the update mechanism of the scanner. The scanner tracks now the
parameters that were used to enable it and the reason why it is running.
This facilitates state logic and allows other modules to "start the
scanner", altough it is already running.
This is mostly a refactoring and not a functional change.
Added a test to verify the behavior.
Signed-off-by: Jan Müller <jan.mueller@nordicsemi.no>
add to task
When user_data is not zeroed-out, the API returns an error. Downgrade
the API error to a warning log instead.
Introducing this check (#76489) broke a few PTS tests, as user_data is
not initialized by `net_buf_alloc()`. Doing so is in discussion:
https://github.com/zephyrproject-rtos/zephyr/issues/77088
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Verifies that we don't leak connection references when the peer goes out
of range whilst we are fragmenting and sending data to the controller.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This test create a setup where an ISO broadcaster will send fragmented
data and get stopped after sending the first fragment and repeating that
operation multiple time to verify that buffers are not leaked.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Convert users of net_buf_put() and net_buf_get() functions to use
non-wrapped putters and getters k_fifo_put() and k_fifo_get().
Special handling of net_bufs in k_fifos is no longer needed after commit
3d306c181f, since these actions are now
atomic regardless of any net_buf fragments.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Some tests have a compile script for that test alone, named
`_compile.sh` or `_build.sh`. These scripts are useful for developers to
avoid compiling the world. But these scripts were not run in the CI.
These scripts were previously not suitable for running in the CI because
would put the artefact in the source directory, but this is no longer
the case, and the CI could run these scripts now.
This commit renames any `<test>/test_scripts/_compile.sh` and
`<test>/test_scripts/_build.sh` to `<test>/compile.sh`. The test runner
in CI will ignores any file named `compile.sh`, so there is no need for
a underscore prefix.
This fits into and extends the hierarchical structure of `compile.sh`
chain that starts at `:/test/bsim/compile.sh`, the CI build script tree.
The newly moved scripts now become a part of the build script tree,
called from a `compile.sh` where a duplicate set of build commands was
before. The sub scripts use `run_in_background` to preserve the
parallelism as it was before this change.
This removes an error-prone duplication and makes the CI test all the
build scripts.
Tests that did not have any compile script are not given one for now.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Add a test that verifies no resources are leaked when re-assembling L2CAP
PDUs over an unreliable channel (ie. lots of disconnects).
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Implementation to take command-line arguments to set log level in run
time for bsim module. Set default log level if no log level is passed
at runtime
Signed-off-by: Guru Mehar Rachaputi <gurumeharrachaputi@gmail.com>
