If Ethernet based network device driver is advertizing
ETHERNET_EMBEDDED_LL_HEADER, then the L2 driver will can
return the proper L2 header size for the network interface.
This info is then used in TX to determine whether to have a
separate net_buf for the link level header, or to embed the
header to the same net_buf as the L2 payload.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This implements support for RFC 7217 which describes a method
to have stable IPv6 Interface Identifiers to be used with IPv6
Stateless Address Autoconfiguration (SLAAC). The stable IIDs are used
to provide enhanced privacy so that an IPv6 address configured using
this method is stable within each subnet, but the corresponding
Interface Identifier changes when the host moves from one network
to another. This method is meant to be an alternative to generating
Interface Identifiers based on hardware (MAC) addresses,
such that the benefits of stable addresses can be achieved without
sacrificing the security and privacy of users.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When virtual interface is being started or stopped so when the
interface is brought up or down, check the return code and pass
it to net_if_up() or net_if_down() calls.
This helps to avoid printing success status even if the interface
up/down failed at the virtual interface level.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add support for capturing arbitrary data via the cooked mode (sll)
capture API. The actual packet capture is done using net_capture_data()
function, the packet capture infrastructure does not need any changes.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Refactor the IP tunneling support as the input callback was removed
in previous commit. The data will flow through the recv callback now
as expected.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The input callback was an unfortunate idea which just complicated
how the packet flows through virtual interfaces so removing it.
The data is passed normally through the recv callback from now on.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The function needs to loop through the virtual interfaces
tied to this physical interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The net_if_ipv6_set_hop_limit() API was missing the "_if_"
part in it. Fix this so that the network interface API is
consistent. The old function is deprecated and should not
be used. The old function is left to the code and it calls
the new properly named function.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
rand32.h does not make much sense, since the random subsystem
provides more APIs than just getting a random 32 bits value.
Rename it to random.h and get consistently with other
subsystems.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Remove all init functions that do nothing, and provide a `NULL` to
*DEVICE*DEFINE* macros.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Align virtual L2 with interface state handling update. Introduce
net_virtual_enable() function, which gets called whenever a network
interface is brought up (operational). This, combined with already
existing net_virtual_disable() function, can be used to update the
carrier state on the virtual interface, based on the underlying
interface status.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Replace unpacked in6_addr structures with raw buffers in net_ipv6_hdr
struct, to prevent compiler warnings about unaligned access.
Remove __packed parameter from `struct net_6lo_context` since the
structure isn't really serialized.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Replace unpacked in_addr structures with raw buffers in net_ipv4_hdr
struct, to prevent compiler warnings about unaligned access.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The virtual_iface is already NULL checked by net_if_get_by_iface()
at the beginning of the function so no need to do it here too.
Coverity-CID: 220535
Fixes#34006
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Simplifying the loop in order to remove dead code (ctx_up is
always NULL after the slist loop.
Coverity-CID: 220538
Fixes#34003
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IPIP tunnel capability bit helps to detect which network
interface supports IPIP tunneling.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This can be used to implement tunneling, VPN etc. The virtual
interfaces can be chained together to support multilayer
network interfaces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
