In ap enable cmd, channel set to 0 means ACS mode.
Remove hostapd AP macro for this case to make ACS mode
available for public usage.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Added new parameter "A" in wifi connect command to support
CA certificate used or CA certificate skipped for
EAP-TTLS-MSCHAPV2 and EAP-PEAP-MSCHAPV2.
Signed-off-by: Qingling Wu <qingling.wu@nxp.com>
Add the check if dev is NULL (when iface is NULL, dev is NULL) when
setting Wi-Fi CMD, in case Wi-Fi driver init fails and shell crashes.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Setting Wi-Fi cmd only when the net interface is up, avoid the case
that driver deinit and net interface is down, then the L2 APIs interact
with supplicant and driver, which may lead to CPU exception.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
The RFC1122 section 3.3.6 says we SHOULD drop the packets if L2 address
is brodcast but L3 address is unicast, but we had seen some Wi-Fi access
points in the field not conforming to that, and DHCP offer is dropped
due to this and causes Wi-Fi connectivity issues.
As the RFC saus it's SHOULD and not a MUST, add a config option to allow
such packets, disabled by default.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The family and proto type was not set for the IPv4 autoconf ARP packets.
Since those should be set for all ARP packets, just move the code
outside of the if block.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There is no need to if-def away the net-stats function since there is a
shim available now.
Signed-off-by: Cla Mattia Galliard <cla-mattia.galliard@zuehlke.com>
If VLAN count is set to 0, then only priority tagged VLAN frames
that have tag value 0 can be received. Also this means that VLAN
interfaces are not created which can save memory if you do not need
to receive any other VLAN frames than those tagged with value 0.
Fixes#84023
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Ensure that all packets are no longer used by ethernet_recv after it was
consumed by the l3-handler.
Signed-off-by: Cla Mattia Galliard <cla-mattia.galliard@zuehlke.com>
The scan events are always enabled which means if another software
component requests a scan, then the WiFi shell scan printouts will
also be sent to the shell.
Only enable the network management scan events when a user has
requested a scan.
Signed-off-by: Eric Holmberg <eric.holmberg@northriversystems.co.nz>
Modifying MAC address is allowed only when the interface is not
administratively UP, as it typically involves conveying the MAC address
to the chip firmware, and accepting the MAC address when interface is
administratively UP will not reflect in the actual usage.
So, modify the check to reject MAC address change if the interface is
administratively UP.
Fixes#81486.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Currently, `CONFIG_OPENTHREAD_LOG_LEVEL` is used to set log level
in OT and register log modules in Zephyr. OpenThread allows 5
levels, causing issues when `OPENTHREAD_LOG_LEVEL_DEBG` is
selected ad we are trying to register modules with unknown lvl.
This commit adds `CONFIG_OPENTHREAD_MODULE_LOG_LEVEL` which is
aligned for Zephyr's log levels.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
Some time ago three Kconfigs dedicated for the child timeouts
configuration were added, but changing them does not apply when
using OpenThread libraries. Added setting these values using
openthread API on openthread start.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
It seems that this change was solely added to address issues with old
TCP stack, which blindly queued packets intended for TX for potential
further retransmission, expecting that the packet would remain intact
during transmission.
I think this assumption was wrong, as it's natural that lower layers
append respective headers to the packet, and this "header stripping"
behavior was specific for Ethernet L2 only. If an upper layer expects
that the packet would need to be retransmitted at some point, it should
clone it instead.
Therefore, remove the L2 header stripping from the Ethernet L2 to avoid
any potential issues in zero-copy case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add new Ethernet driver config option,
ETHERNET_CONFIG_TYPE_EXTRA_TX_PKT_HEADROOM, which allows Ethernet
drivers to inform L2 about the extra net_pkt headroom they need to be
allocated.
This is only supported when CONFIG_NET_L2_ETHERNET_RESERVE_HEADER is
enabled, so that it's possible to fit entire packet into a single
net_buf, which is needed for zero-copy transmission.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Packets are forwarded to the native interface or in other words,
the vlan header is simply stripped and ignored. This feature is called
'priority tagging'.
Signed-off-by: Cla Mattia Galliard <cla-mattia.galliard@zuehlke.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Remove the build assert from NET_L3_REGISTER() macro as that
is causing an issue with llvm. Add runtime check of the handler
pointer value.
subsys/net/l2/ethernet/arp.c:1044:1: error: static_assert expression
is not an integral constant expression
ETH_NET_L3_REGISTER(ARP, NET_ETH_PTYPE_ARP, arp_recv);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/zephyr/net/ethernet.h:1272:2: note: expanded from
macro 'ETH_NET_L3_REGISTER'
NET_L3_REGISTER(&NET_L2_GET_NAME(ETHERNET), name, ptype, handler)
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/zephyr/net/net_core.h:190:2: note: expanded from
macro 'NET_L3_REGISTER'
BUILD_ASSERT((_handler) != NULL, "Handler is not defined")
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/zephyr/toolchain/gcc.h:87:51: note: expanded from
macro 'BUILD_ASSERT'
define BUILD_ASSERT(EXPR, MSG...) _Static_assert((EXPR), "" MSG)
^~~~~~
subsys/net/l2/ethernet/arp.c:1044:1: note: cast from 'void *' is not
allowed in a constant expression
include/zephyr/net/ethernet.h:1272:2: note: expanded from
macro 'ETH_NET_L3_REGISTER'
NET_L3_REGISTER(&NET_L2_GET_NAME(ETHERNET), name, ptype, handler)
^
include/zephyr/net/net_core.h:190:29: note: expanded from
macro 'NET_L3_REGISTER'
BUILD_ASSERT((_handler) != NULL, "Handler is not defined")
^
/usr/lib/llvm-14/lib/clang/14.0.0/include/stddef.h:89:16: note: expanded
from macro 'NULL'
define NULL ((void*)0)
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Print more data / debug information for ARP messages.
Also remove unnecessary "&" when printing IPv4 address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The work in Ethernet send in commit 2f10d7d816
("net: ethernet: Set the ptype by the caller in send")
introduced a bug because we could try to do ARP resolving
for ARP packets too. This is clearly a wrong thing to do.
So before trying to do ARP resolving, make sure the the
packet type is IP packet.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow user to specify protocol extensions when receiving data
from Ethernet network. This means that user can register L3
protocol handler using NET_L3_REGISTER() with the desired
protocol type. Ethernet code will then call the handler if
such a protocol type packet is received. This is currently
only implemented for Ethernet. The original IPv4 and IPv6
handling is left intact even if they can be considered to
be L3 layer protocol. This could be changed in the future
if needed so that IPv4 and IPv6 handling could be made
pluggable protocols.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of setting the upper protocol type in ethernet_send()
by checking the protocol type bits, use the ptype that is already
set by the caller. This allows new protocol types to be supported
and makes the system extensible.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Remove unused family variable from receive function in ethernet layer 2.
It is checked only once under such conditions, that do not allow the
variable to be different.
Signed-off-by: Cla Mattia Galliard <cla-mattia.galliard@zuehlke.com>
Add check that should enable MFP when connect to WPA3 network,
as MFP required is mandatory for WPA3 network.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Support printing WPA3 enterprise type in scan result for more
accurate display, including the suiteb, suiteb-192 and WPA3
enterprise only.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
For 'wifi status' and 'wifi ap status' cmd of the hostap case,
originally only support getting 'EAP-TLS' for the enterprise
mode, which is not correct. Now support getting the specific
enterprise mode, including the WPA3 enterprise mode and
the EAP method type.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Change Wi-Fi suiteb type into WPA3 enterprise security type, it
includes suiteB, suiteB-192 and WPA3 enterprise only mode.
Support setting WPA3 enterprise only mode, which should use
cipher_config->key_mgmt as WPA-EAP-SHA256, and the AKM in RSN
IE will show 00-0F-AC:5.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Remove EAP TLS SHA256 security, as it was added to support the AKM
of 00-0F-AC:5 in RSN IE, but actually this AKM is used by WPA3
enterprise only mode.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
If Ethernet based network device driver is advertizing
ETHERNET_EMBEDDED_LL_HEADER, then the L2 driver will can
return the proper L2 header size for the network interface.
This info is then used in TX to determine whether to have a
separate net_buf for the link level header, or to embed the
header to the same net_buf as the L2 payload.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
There are currently four types of roaming, 11r roaming, 11v roaming, 11k
roaming and legacy roaming, The priority of the roaming mode is
11r-->11v-->11k-->legacy roaming. If the ap does not support 11r/11v/11k
roaming, we will use legacy roaming. legecy roaming needs to do
full channel scan, which is the same as the general scan connection
process, so the legacy roaming time will be longer.
Signed-off-by: Gaofeng Zhang <gaofeng.zhang@nxp.com>
The default exponent is 0, will cause twt setup quick failed,
set exponent value derived from twt interval to fix it.
Signed-off-by: Rex Chen <rex.chen_1@nxp.com>
Add WIFI_SAP_IFACE_NO_IR state to keep same as hostapd_iface_state,
which is updated as the hostap upmerge.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
For CMD 'wifi ap status', removing HAPD related definition to make it
more commonly used for non-supplicant case.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Most users won't be interested in the per-channel rules but only in the
country code, so, add a verbose option to hiden per-channel rules which
are too verbose.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
In order to prepare for extending the options, convert to getopt long
for easier parsing of options.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
If a shell command does not have a sub command, then the 3rd parameter
to SHELL_SUBCMD_ADD() macro should be set to NULL so that the help
will only print information specific to that command and not all
wifi commands.
Fixes#82633
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When calling wifi_ap_disable() API specific WiFi driver implementation was
checked whether 'ap_enable' was provided, instead of 'ap_disable'. Fix
that copy-paste error.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Add "bandwidth" parameter to "wifi ap enable" command.
Add "ht_capab" and "vht_capab" parameters to "wifi ap config" command.
Signed-off-by: Gang Li <gang.li_1@nxp.com>
k_fifo_put is a macro that expands the call to net_pkt_ref(pending)
multiple times when CONFIG_TRACING is enabled thus causing extra
reference for the pending packet and a memory leak.
Fix by moving the referencing call to a separate line.
Signed-off-by: Rait Rääk <raitraak@gmail.com>
