Update the Kconfig configuration to allow enabling the underlying
filesystems (e.g. exFAT), with only `FILE_SYSTEM_LIB_LINK` enabled.
Signed-off-by: Jordan Yates <jordan@embeint.com>
This option switches support for multiple volumes on the physical drive. By
default (0), each logical drive number is bound to the same physical drive
number and only a first FAT volume found on the physical drive will be
mounted.
When this function is enabled (1), each logical drive number can be bound
to arbitrary physical drive and partition listed in the VolToPart[].
The VolToPart[] is expected to be provided by Zephyr application.
For example, 2 FAT partition on SD disk ("SD" index 3) in terms of Zephyr:
{3, 1} - mount point "/0:"
{3, 2} - mount point "/1:"
The mount points have to be numbered in this case.
Code example of mounting a second FATFS partition places on SD-card:
static FATFS fat_fs;
static struct fs_mount_t mp = {
.type = FS_FATFS,
.fs_data = &fat_fs,
.mnt_point = "/1:
};
/*
* 2 FAT partition on SD disk
* PARTITION.pd - Physical drive number. "SD" has index 3 in terms of
* Zephyr (see FF_VOLUME_STRS)
* PARTITION.pt - Partition (0:Auto detect, 1-4:Forced partition). So 1 for
* the first FATFS partition and 2 - for second.
*/
PARTITION VolToPart[FF_VOLUMES] = {
[0] = {3, 1}, /* "0:" ==> 1st partition on the pd#0 */
[1] = {3, 2}, /* "1:" ==> 2nd partition on the pd#0 */
[2] = {0, -1}, /* "2:" ==> 3rd partition on the pd#0 */
[3] = {0, -1},
[4] = {0, -1},
[5] = {0, -1},
[6] = {0, -1},
[7] = {0, -1},
};
fs_mount(&mp);
Signed-off-by: Grygorii Strashko <grygorii_strashko@epam.com>
The Kconfig option enables support for 64-bit LBA, which also allows
to enable GUID Partition Table (GPT) support.
Signed-off-by: Grygorii Strashko <grygorii_strashko@epam.com>
Users should be able to call fs_mkfs() manually even if FS_FATFS_MOUNT_MKFS
is disabled.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
This commit enables zephyr to configure the FatFs FF_FS_REENTRANT
option and support fs actions from multiple threads.
CONFIG_FS_FATFS_REENTRANT enables the option and provides zephyr
mutex wrappers.
Signed-off-by: Nicola Ochsenbein <Nicola.Ochsenbein@husqvarnagroup.com>
Commit add hidden Kconfig option CONFIG_FS_FATFS_FF_USE_LFN
that is passed to ELM FAT to define FF_USE_LFN configuration.
The FF_USE_LFN still depends, indirectly, on choice
CONFIG_FS_FATFS_LFN_MODE config options
CONFIG_FS_FATFS_LFN_MODE_BSS, FS_FATFS_LFN_MODE_STACK and
FS_FATFS_LFN_MODE_HEAP, but the logic has been moved out of
zephyr_fatfs_config.h into Kconfig file.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit fixes usage of old identifiers, from ELM FAT module,
and adds additional information on how certain options affect
FAT operation in Zephyr.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The Kconfig option allows to set minimum expected sector size
to be supported by FAT fs driver.
When this value differs from CONFIG_FS_FATFS_MAX_SS the driver
will query device for actual sector size, expecting different
sector sizes for different device. When CONFIG_FS_FATFS_MIN_SS
and CONFIG_FS_FATFS_MAX_SS are the same, then there is slight
reduction if FAT driver size, as the query logic is removed
and CONFIG_FS_FATFS_MAX_SS is used for all devices.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The commit adds FS_FATFS_MAX_ROOT_ENTRIES Kconfig option that allows
to select number of root node entries that will be allocated while
creating FAT file system on a device.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This is to support Sypnosys Designware SDMMC controller read and write
operation where the buffer address is needed to be 16bytes and 512bytes
aligned. Adding macro FS_FATFS_WINDOW_ALIGNMENT to align the "win"
variable address in FATFS struct.
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
In order to be able to make a "choice" from any other
Kconfig.defconfig (-ish) file, the choice needs to be named.
This commit names a few choices.
Signed-off-by: Emil Lindqvist <emil@lindq.gr>
The commit applies changes that are required by update of ELM Chan's
FAT FS driver update to version 0.14b.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Make sector size used by flash disk configurable and expose new disk and
fatfs configurations to Kconfig.
Signed-off-by: Markus Fuchs <markus.fuchs@de.sauter-bc.com>
The commit adds FS_FATFS_READ_ONLY Kconfig option; the option, when
selected, excludes write supporting code within ELM FAT driver.
When write support to FAT FS volumes is not desired, this option may be
selected to slightly reduce code size.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds FS_FAFTFS_MKFS Kconfig option; the option, y by default,
allows to include mkfs supporting code, within fs_mount callback,
for ELM FAT file system driver.
When formatting of FAT FS volumes is not desired, this option may be
deselected to slightly reduce code size.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
