This resolves some addressed comments in this PR
https://github.com/zephyrproject-rtos/zephyr/pull/77930
It adds as well a section in the documentation about some
recommendations to increase ZMS performance.
Signed-off-by: Riadh Ghaddab <rghaddab@baylibre.com>
Updates to project configuration extras to build with
Zephyr Controller.
Configure for 2 broadcast audio sources in 2 groups,
2 unicast audio source in 1 group and, 2 audio sinks
for 1 group for both broadcast and unicast usecases.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Enabled Periodic Advertising Sync Transfer feature in the
Bluetooth Low Energy HCI Controller samples.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Align Kconfig values used with bt-ll-sw-split Controller as
same used in hci_uart sample.
Relates to commit 2c6306d099 ("Bluetooth: Controller:
BT_CTLR_ISO_TX_BUFFER_SIZE from BT_ISO_TX_MTU")'.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the sample so that multiple advertising setup can
be reused in other sample if required. Bluetooth enable can
be in the sample that reuses the advertising setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix buf alloc timeout to 20 millisecond as the sent callback
can have a latency that is upto twice the ISO interval.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Restrict possible maximum stream synchronization to
implementation defined 2 stream, as structure declarations
in the implementation is limited to 2.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
What is changed?
- Added a new mps3 board an552 for the soc corstone300.
The qualifier to build/run application with board mps3/an552 is
`mps3/corstone300/an552` for secure and
`mps3/corstone300/an552/ns` for non-secure.
- Added FVP variant to enable FVP testing with corstone300
and it uses the ARM FVP `FVP_Corstone_SSE-300_Ethos-U55`.
The qualifier to build/run application with FVP is
`mps3/corstone300/fvp` for secure and
`mps3/corstone300/fvp/ns` for non-secure.
- Note: the qualifier to build/run application with board mps3/an547
is now changed to
`mps3/corstone300/an547` for secure and
`mps3/corstone300/an547/ns` for non-secure.
How is it changed?
- Moved common code from mps3/an547 to corstone300.
- Renamed soc for an547 to corstone300 and added
a new soc corstone300/an552.
Why do we need this change?
- This enables FVP support and testing for corstone300.
- SOC/qualifier for mps3/an547 was renamed to reduce code redundancy
- A separate FVP variant was added for AN552 because, the TFM board
used for non-secure variant differs for FPGA and FVP.
TFM board `arm/mps3/corstone300/fvp` should be used when testing
AN552 with FVP and `arm/mps3/corstone300/an552` should be used when
testing with AN552 FPGA.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
Adds adxl362 streaming and trigger configurations to accelerometer
samples for profiling the performance impact of adding rtio support to
max32 spi and adxl362 accelerometer drivers.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Zephyr 3.7.0 has been released and it is time to remove the migration
code added in 9cf07bbdb5 (bluetooth:
Rename rpmsg HCI driver and sample to ipc).
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Removed the LE Audio specific definition and instead
refer to the value defined by iso.h as it is ISO/Core
that defines this size, and not BAP/Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The truncation is not possible in practice but add suitable cast to
avoid the warning.
samples/net/sockets/echo_server/src/tcp.c:297:54: warning:
‘%d’ directive output may be truncated writing between 1 and 10 bytes
into a region of size 5 [-Wformat-truncation=]
297 | snprintk(name, sizeof(name), "tcp4[%d]", slot);
| ^~~~~~~~~~
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Removed the generation of broadcast id inside the stack. It is now up
to the application to generate this by itself. The CAP sample has
been modified to allow either a static broadcast, or a random one.
All of this is handled in the application.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
To improve broadcast sink sample robostness the max codec meta data
size configuration is increased to reflect the meta codec data sizes
seen for sources in market.
Signed-off-by: Jens Rehhoff Thomsen <jthm@demant.com>
Originally, the net_mgmt task priority is very low. Based on roaming
implementation, roaming is triggered in net_mgmt task. When running UDP
test while doing roaming, the net_mgmt task won't have much chance to
run and roaming can't be triggered.
Increase it to 3, which is same value of supplicant task.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Added new ops and events in glue layer to support roaming.
Added new flag WIFI_NM_WPA_SUPPLICANT_ROAMING to control roaming
feature.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Add the Kconfig menu to the sample configuration.
Update sample.yaml by adding the shield configuration.
Signed-off-by: Charles Dias <charlesdias.cd@outlook.com>
This adds a user application that shows the usage of ZMS
The sample app shows three main functions of ZMS:
- read/write/delete key/value pairs
- fill all storage and delete it
- calculate free remaining space
Signed-off-by: Riadh Ghaddab <rghaddab@baylibre.com>
This sample executes some mathematical functions
that can be used for audio processing like
filtering (Fast Fourier Transform (FFT)) or
echo cancellation (Least Mean Square (LMS) filter algorithm).
This is an example that demonstrates how to include a proprietary
static library into the Zephyr build system.
The library is in an out of tree location.
To use this sample, with an out of tree library, one needs to define
an environment variable LIB_LOCATION.
If that is not defined, a default Zephyr API is used instead.
By default it uses CMSIS-DSP backend for math operations.
In README one can find more information.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
When ever `unack_queue_len` changed, should raise signal
`tx_queue_change` to let's tx_thread known queue changed.
Fixed the situation where the TX thread may no longer be sent out
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
This updates the documentation of all the Qemu boards
to use the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the WeAct boards
to use the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Rasperry Pi boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Segger boards to
use the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Texas Instruments boards to
use the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Longan boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Atmel boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the WaveShare boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the UDOO boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the STM32 boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Quicklogic boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the NXP boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Nuvoton boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Google boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the GigaDevice boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Ezurio boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Espressif boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the BBC boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Adafruit boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Actinius boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The CONFIG_DUMMY_DISPLAY is now enabled in conjunction with devicetree,
So, no need to be explicitly enabled.
Remove the setting.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Replace OVERLAY_CONFIG with CONF_FILE since the file in question
contains an alternative configuration to the one in prj.conf
as clearly stated in the sample doc
'If you use poll you should also use `prj_poll.conf` instead of
`prj.conf`.'
Signed-off-by: Abderrahmane Jarmouni <git@jarmouni.me>
Move stm32_blk.conf ouside of 'boards' as this folder is meant to
contain only board-specific devicetree overlays and Kconfig fragments.
Signed-off-by: Abderrahmane Jarmouni <git@jarmouni.me>
Die temperature polling sample is not enabled for frdm_mcxc242 board.
Add devicetree overlay and Kconfig configuration for the sample to
enable it.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Add support for building NXP WiFi. Since the driver typically requires
binary blobs, enable CONFIG_NXP_WIFI_BUILD_ONLY_MODE for this testcase.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove CONFIG_MBEDTLS_HAVE_TIME_DATE, which will cause that mbedtls
include Zephyr time.h and leads to 'DIV_ROUND_UP' redefined warning.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
There's no need to add conditions to CONFIG_PWM_NRF_SW, because it is
already conditioned to DT status. Right now, if any system uses both
normal PWM and "SW PWM", it needs to manually enable the driver
Kconfig.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The nRF54 and nRF92 chips has data cache, which means
the ICMsg and ICBMsg must be configured to follow required
cache alignment of the shared memory.
The `dcache-alignement` needs to be defined for that.
Signed-off-by: Dominik Kilian <Dominik.Kilian@nordicsemi.no>
For the "References" section to be useful, it needs to include a call to
the target-notes directive, which is the one that actually generates the
list of references made in the current document.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Changed dependency of the BT_BAP_SCAN_DELEGATOR to GATT_DYNAMIC_DB
from 'select' to 'depends on' and solved all loop dependencies
caused by this change.
Fixes#79108
Signed-off-by: Babak Arisian <bbaa@demant.com>
This commit fixes the following issues for adp_xc7k/ae350
1. Incorrect copyright due to copy-paste error
2. Separate RAM region for the host and remote clusters
3. Allocate hart 0 for host and hart 1 for remote cluster
4. Use mbox channel 9, 10 for the sample, leaving channel/irq source
1 ~ 8 for ae350 8-core IPI
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
Add call to Z_SPIN_DELAY() to avoid issue in bsim where
time does not progress in loop causing other threads to
starve.
Signed-off-by: Johan Stridkvist <johan.stridkvist@nordicsemi.no>
remove k_work related code and change
the argument of the callback to `struct net_socket_service_event`.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Enable support for FRDM_RW612 with memc driver sample, using attached
aps6404l PSRAM.
Signed-off-by: David Missael Maciel <davidmissael.maciel@nxp.com>
Output the timestamp of the PPS timepulse when printing the fix
information, if the driver support the timepulse and it has started
toggling.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Consolidate the testcase.yaml definition for the display sample where
possible to use a single testcase for all shields. This won't work for
all testcases, but helps avoid the pattern where a new testcase using
"platform-allow" is added for every shield/board combination that needs
to be run with this sample.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Upstream NCS's library for storing Wi-Fi credentials.
This library allows storage of Wi-Fi credentials
using different backends.
Either the Zephyr settings subsystem
or the PSA secure backend can be used.
For testing purposes, credentials can be defined statically.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
Signed-off-by: Gregers Gram Rygg <gregers.gram.rygg@nordicsemi.no>
Signed-off-by: Kaja Koren <kaja.koren@nordicsemi.no>
Signed-off-by: Simen S. Røstad <simen.rostad@nordicsemi.no>
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
This updates the documentation of all the Seeed Studio boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Change regex for no_multithreading test version for nRF54L15 platform.
This needs to be changed because LOG is running in MINIMAL mode.
Signed-off-by: Jakub Zymelka <jakub.zymelka@nordicsemi.no>
The buffer pointer provided to the dynamic handler should be verified
after checking the transaction status. In case upload was aborted and
underlying connection closed, the callback will get
HTTP_SERVER_DATA_ABORTED status w/o a pointer to any data.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
- boards: renesas: Add support for agt.
- drivers: counter: Add support for counter driver use agt
- dts: arm: Add support for agt.
- dts: bindings: Add support for agt counter driver.
- soc: renesas: Add support for agt counter driver.
- samples: drivers: counter: alarm: Add support for RA8
This is initial support with only basic functionality for counter
operation on Zephyr using AGT hardware, current support for
count source is limited to LOCO and PCLKB, other count source
like underflow signal external pin or AGTIO from another AGT
channel will be added in later support
Signed-off-by: Ha Nguyen <ha.nguyen.fz@bp.renesas.com>
Signed-off-by: Thao Luong <thao.luong.uw@renesas.com>
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
Use EXTRA_CONF_FILE in documentation .rst/.md files,
that replaced deprecated OVERLAY_CONFIG since the Zephyr v3.4 release.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
.conf files added to enable INPUT_ESP32_TOUCH_SENSOR during sample build.
The absence of these files incorrectly prevented the input_dump sample
build from failing due to missing required hal files.
Signed-off-by: Marcio Ribeiro <marcio.ribeiro@espressif.com>
Currently, the camera fixture test can only tell whether data are dumped
onto memory. This is to check further if the image content is correct.
The algorithm is rather simple: compare the average color of each bar
of a generated pattern with a predefined target in CIELAB76 color
space (which is nearly perceptually uniform).
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The logs that the fixture test are based on are not printed anymore due
to recent changes from "printk" to "LOG_DBG". Change the log level so
that it can work again.
Remove "Capture started" as it is not a relevant test regex. Logs are
sometimes not correctly printed in the console, for example, we can see:
DEBUG - DEVICE: muart:~$ [mapture started
As "Capture started" is a one-time log, fixture test will then fail due
to timeout.
Also, consolidate other regex.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The sample uses the Zephyr HTTP server library
and demonstrates the Prometheus metric
server node. Prometheus client library
runs as a pull method. The sample contains
the HTTP request counter and increases
when refresh path of '/metrics' from the browser.
Signed-off-by: Mustafa Abdullah Kus <mustafa.kus@sparsetechnology.com>
Add usage example for sys_trace_user_event, to demonstrate how users
could add tracing functionality to their application.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add EAP-TLS, EAP-PEAP-MSCHAPv2, EAP-PEAP-GTC, EAP-TTLS-MSCHAPv2,
EAP-PEAP-TLS, EAP-TLS-SHA256 enterprise wpa2 and wpa3 suiteb
support for station.
Signed-off-by: Rex Chen <rex.chen_1@nxp.com>
Use EXTRA_CONF_FILE in sample yaml files,
that replaced deprecated OVERLAY_CONFIG
since the Zephyr v3.4 release.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
This is a follow-up to commit 7a2ce2882a.
Do not enable clock control by default on nRF54H Series SoCs when
the system timer is present, because clock control is not needed
for this purpose there.
Add missing `default y` in the CLOCK_CONTROL_NRF2 Kconfig option that
enables compilation of clock control drivers for nRF54H Series.
This way modules that actually require clock control (like drivers
that use radio) will be able to enable it using the generic option
(CLOCK_CONTROL), not the above one that is specific for nRF54H.
Update accordingly applications that referenced the CLOCK_CONTROL_NRF2
option.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
SAADC peripheral for nRF54L Series allows to choose internal
voltages as positive inputs and samples shall showcase that.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Currently, Zephyr is always sending back notifications to
AP (e.g Linux in our case) on channel 0.
But this currently doesn't work if Linux uses other channel
id for communication. So, add option to use predefined
vring ID that can accomodate Linux used ID.
Signed-off-by: Alexandru Lastur <alexandru.lastur@nxp.com>
This overlay has all necessary configuration needed for Enterprise mode.
Two variants are given, once with fixed size network buffers and other
with variable size network buffers (still experimental).
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
- Fixes bug where the sample would only look at the first name type
and skip the rest.
Signed-off-by: Alexander Svensen <alexander.svensen@nordicsemi.no>
Do not apply format setting unless needed. Also, correct the check for
the RGB565 format setting- the zephyr display API treats RGB565 and
BGR565 as big endian, so the format needed here is BGR565.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add support for using the SMARTDMA engine on the FRDM-MCXN947 board with
the video capture sample.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Handle line_offset field within video capture sample. Other samples do
not support partial framebuffers and therefore can ignore this field.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
TI tmp1075 driver implemented based on tmp108 driver.
The driver initializes the sensor based on the DTS.
Added tmp1075 example overlay file to thermometer sample.
All you need to do to use the sensor is to connect the I2C and
optionally interrupt line.
To see default DTS configuration option inspect `ti,tmp1075.yaml`
bindings file and sensor spec.
Signed-off-by: Paweł Czaplewski <pawel.czaplewski@arrow.com>
If the Broadcast ID is initially set to 0x000000,
which is valid, comparison logic on add of an
actual Broadcast ID of 0x000000 fails.
Likewise for SID.
Moving INVALID_BROADCAST_ID define to bap.h
Signed-off-by: Lars Knudsen <LAKD@demant.com>
CONFIG_ZVFS_POLL_MAX is now used to control the maximum number of poll()
entires. Thereby, CONFIG_NET_SOCKETS_POLL_MAX is redundant and shall
be deprecated.
Modify the defaults for NET_SOCKETS_POLL_MAX and ZVS_POLL_MAX so that
the deprecation actually makes sense instead of symbol removal. In case
the application still sets the old config, it will modify the
ZVS_POLL_MAX default.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Remove the unnecessary video-controls header included in video.h.
Drivers, applications should explicitly include it when needed.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The mcux_acmp will get support by the comparator subsystem. To avoid
namespace clashes, namespace the driver, kconfigs and use the
MCUX_ACMP config solely to select the MCUX SDK driver.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
ZBus currently does not have a `HEAP_MEM_POOL_ADD_SIZE_ZBUS` when using
message subscribers or runtime observers, forcing the developer to set that
manually. Adding the configuration option to zbus would improve its
usability and make zbus easier to use. With this feature, zbus aligns with
the other Zephyr subsystems' heap memory allocation approach.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
Make the blinking and fading parameters adjustable so that samples
can be run on devices that support only short periods.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Introduce BT_CTLR_PERIPHERAL_ISO_RESERVE_MAX Kconfig option
so that disabling this option will use minimum time
reservation and exercise the peripheral ISO connection event
continuation using is_abort_cb mechanism.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Introduce BT_CTLR_PERIPHERAL_RESERVE_MAX Kconfig option so
that disabling this option will use minimum time reservation
and exercise the peripheral connection event continuation
using is_abort_cb mechanism.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The sample is supposed to help examine the issues with touchscreen.
It draws a plus in last touched position.
Signed-off-by: Dominik Lau <dlau@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Remove the `work_q` parameter from `NET_SOCKET_SERVICE_SYNC_DEFINE` and
`NET_SOCKET_SERVICE_SYNC_DEFINE_STATIC` as this feature was dropped
during review but the removal was not 100% complete.
Signed-off-by: Jordan Yates <jordan@embeint.com>
IPv6 MLD API was so far defined in an internal header. This does not
seem correct though, as application code should be able to join/leave
multicast groups, hence the API should be exposed in a public header,
just as it is done for its IPv4 countepart - IGMP.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The sample uses net_config library, so there's no need for the sample to
configure unicast IP addresses manually.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Refactor the code to comply with:
Violation to rule 5.7 (Tag name should be unique) tag: data
Rename the structure to avoid excessive refactoring.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Building the sample with IPv4 only gives the following warning:
tcp.c:99:37: warning: array subscript 'struct sockaddr[0]' is partly
outside array bounds of 'struct sockaddr_in[1]' [-Warray-bounds]
data->tcp.sock = socket(addr->sa_family, SOCK_STREAM, IPPROTO_TCP);
This doesn't really seem like a valid one, but to get rid of it
workaround by specifying address family explicitly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The host-based adv auto-resume function has both a problematic
implementation and disagreement in the community around how it should
behave. See the issue linked resolved below for details.
This patch makes the deprecation visible to the user. The user will be
better served by a auto-resume tailored their applications use case,
based on more primitive host API like `conn_cb.recycled`, which has
obvious behavior that is unlikely to change.
Resolves: https://github.com/zephyrproject-rtos/zephyr/issues/72567
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Disable CDC ACM logging in the configuration overlays used to select the
CDC ACM UART as the shell backend.
The build warning was introduced by the commit e8c4867806
("usb: cdc_acm: disable logging if used for shell with logging")
to prevent recursive logging when using the CDC ACM UART as shell or
logging backend
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add a sample to demonstrate use of persistent keys in the PSA Crypto API.
The implementation of the PSA ITS API that allows storage of persistent
keys is provided either by the just-introduced secure storage subsystem
or by TF-M.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Add a sample to demonstrate direct use of the PSA ITS API.
The implementation of the API is provided either by the just-introduced
secure storage subsystem or by TF-M.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The sample currently doesn't build for non-secure nRF platforms due to
mbed TLS misconfiguration - TFM enforces PSA crypto API, while the
default configuration for supplicant uses legacy crypto configuration.
In result, build fails due to unsatisfied dependencies. Therefore,
disable this variant from building temporarily to unblock the CI, until
the issue is resolved.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The QoS structure is not related to a codec, but rather a
stream, and should thus not use the "Codec" name.
The BAP and ASCS specs refer to the QoS as
"QoS configuration" several places, so it is an obvious
choice for a name.
Since the structure is defined and used by BAP, the prefix
was changed from bt_audio to bt_bap.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use the CMake variable for iterable section's subalignment instead of a
global defined macro.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
MAX32662EVKIT board has CFAF128128B1-0145T display which
is 128x128 graphic display.
This commit enable mpi dbi display support with LVGL graphic library.
Pin connection of display is 3wire mode
SRAM size increased to be fit with lvgl example.
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Add the dts and config overlay for the two boards in order
to have the openamp_rsc_table sample working on
HiFi4 DSP from i.MX8QM and i.MX8QXP.
Since these two are similar, use a snippet.
Therefore, to compile the sample we use:
west build -p -b imx8qm_mek/mimx8qm6/adsp -S nxp-openamp-imx8-adsp
-s samples/subsys/ipc/openamp_rsc_table/
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
strncasecmp()'s prototype is provided in strings.h
let's include it to avoid a build warning.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Several samples used K_FOREVER when allocating buffers in the
system workqueue thread, which is prohibited.
The samples should rather retry later if TX fails.
This is not the ideal solution for the samples, but
fixes a bug. Ideally the samples would use a dedicated thread
to handle TX, instead of the system workqueue.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Due to the update of function bt_br_discovery_start,
register discovery callback by calling
bt_br_discovery_cb_register.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
A virtual metal_device is created, next the needed IO regions are created
and added to this device. Immediately we extract these regions back out
and make use of them. There is no reason to create the metal_device and
add the IO regions to it, instead simply use the IO regions directly.
This is similar to what was already done to the openamp_rsc_table sample.
Signed-off-by: Andrew Davis <afd@ti.com>
This is in preparation for adding another SoC where qemu_xtensa
is no longer valid choice. So use qemu_xtensa/dc233c as it is
the same as the old qemu_xtensa.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Upgrade to accel_polling sample application to support
RTIO streaming functionality. This mode is enabled when
CONFIG_SENSOR_ASYNC_API is defined. NUM_SENSORS must be
set to the correct number of sensors used.
Signed-off-by: Vladislav Pejic <vladislav.pejic@orioninc.com>
Enable kernel dynamic object allocation.
Otherwise the following error is printed:
E: 0xa138 is not a valid sample driver
E: address is not a known kernel object
E: syscall z_vrfy_sample_driver_state_set failed check: access denied
E: couldn't start driver interrupts
Signed-off-by: Marek Slowinski <mslowinski@antmicro.com>
Signed-off-by: Mateusz Hołenko <mholenko@antmicro.com>
Make sure that CONFIG_ZVFS_OPEN_MAX in the tests and samples is at
least the same value as CONFIG_NET_SOCKETS_POLL_MAX so that we
cannot have more polled sockets than there are available file
descriptors.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Adds custom overlay and config allowing the fs_sample to run on
the stm32f746g_disco with DMA enabled.
Signed-off-by: Maciej Sobkowski <msobkowski@antmicro.com>
Add flpr and ppr core to the sample.
Since there are only 2 UARTs available on DK, local UART configuration
is using only cpuapp and cpurad.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add interrupt locking during test to ensure that main thread is not
interrupts which would impact the test.
Add longer sleep time between tests to ensure that all logs are
processed on time and not dropped.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Remove unused nRF21 FEM SPI CSN control as the Zephyr
Controller does not implementation SPI control for Tx/Rx
nor for Tx gain settings.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add CI coverage for nRF5340 plus nRF21540 FEM usage in
hci_uart plus hci_ipc samples.
The overlay values are inspired from:
https://github.com/nrfconnect/sdk-nrf/tree/
85307a9ca0fb6ba8c61f4bd05b7f866cde42612f/boards/shields/nrf21540ek
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added support for dynamic registration and unregistration of the
Broadcast Audio Scan Service (BASS) within the scan delegator.
This enables both scan delegator and BASS to be registered or
unregistered dynamically at runtime.
Signed-off-by: Babak Arisian <bbaa@demant.com>
If an involuntary disconnection happened it could set default_conn to NULL
while it was still being used in the main while loop.
Signed-off-by: Hakan Jansson <hakan.jansson@infineon.com>
Fix the calculation of the response slot that is assigned to the
temporarily connected responding device.
Signed-off-by: Hakan Jansson <hakan.jansson@infineon.com>
Adds NXP platforms to the smp_svr sample allow list,
for overlay-serial.conf and overlay-shell.conf.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Add sample application to capture an image frame from a camera
and send it for display on LCD via the LVGL library.
Signed-off-by: Charles Dias <charlesdias.cd@outlook.com>
Align all existing samples/tests/applications which
contains nrf54l15pdk/nrf54l15/* by adding
nrf54l15dk/nrf54l15/* to enable twister builds.
Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no>
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Evaluate CONFIG_LINKER_ITERABLE_SUBALIGN in CMake instead of in the
linker script.
It cannot be assumed that a linker generator implementation is
pre-processed and therefore Kconfig settings cannot be used in those
but must be evaluated in CMake.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated. Let's switch the filter and build
checks to native_sim instead.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is already filtered in the common
part. No need to remove it also per test.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these samples in both native_sim and native_posix
does not improve coverage for these samples but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix
does not improve coverage for the sample but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add code to get the current frame rate and enumerate all supported frame
rates (frame intervals) of the current format.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Update the includes for Bluetooth Audio samples so they
properly include what they use.
The includes are then used to determine which relevant APIs
to refer to in the READMEs.
Finally improve the naming and description of the samples
using the Profile names and role.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Used the SMP_BT_SVC_UUID_VAL define exposed in the smp_bt header
in the smp_svr sample instead of hardcoding its value.
Signed-off-by: Mateusz Kapala <mateusz.kapala@nordicsemi.no>
After introduction of struct http_response_ctx, the dynamic resource
data buffer is no longer needed for transferring data between the
application callback and the server. It is therefore removed to avoid
unnecessary copying of data.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Allow the application to send headers and response codes from a dynamic
resource callback by filling out a response context structure.
This also allows simple requests to be completed in a single execution
of the callback, by setting the final_chunk flag.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
This commit uses the new .. zephyr:code-sample-category directive to
categorize code samples across the tree.
Updates existing legacy references to manually defined targets to now
use :zephyr:code-sample-category: role instead.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adopt zephyr:code-sample directive to describe the Dining
Philosophers sample and update reference accordingly.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add broadcast support for the CAP acceptor sample.
This adds new sample-specific Kconfig options to help
select the right Kconfig options based on whether
unicast, broadcast or both is being used.
The babblesim implemented for the broadcast has been expanded
to verify that the CAP acceptor receives the broadcast audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Was getting compilation error due to `CONFIG_SHELL_CMD_ROOT`
not being defined whe building the sample under certain
configurations.
The `CONFIG_SHELL_CMD_ROOT` is defined and used only when
`CONFIG_SHELL_START_OBSCURED` is enabled, we can simply move
it to another file and rely on CMakeLists.txt to compile.
Run the `login_init` with `SYS_INIT` so that the `main()`
do not need to have knowledge of its existence.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Remove the system heap override config from the board sample config.
Remove the memory saving restrictions.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
BAP mandates support for bondable mode for all central and
peripheral roles.
Due to Kconfig circular dependencies, some additional
Kconfig changes had to be made.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add Devicetree overlay for samples basic/blinky_pwm and drivers/led/pwm
for frdm_mcxc242 board to set appropriate tpm clock source and
to enable pwmleds.
Signed-off-by: Michal Smola <michal.smola@nxp.com>
Added new Kconfigs for defining permission level of GATT
characteristics that are part of the Bluetooth SMP service in the
MCUmgr subsys.
Removed the CONFIG_MCUMGR_TRANSPORT_BT_AUTHEN as the new Kconfig
options are mutually exclusive and need to be groupa as the Kconfig
choice option.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
This adds a dt overlay to enable support of cc1352p7 lp
to the openthread coprocessor sample application.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Any places that checked for GTBS is now always enabled
as GTBS is mandatory to support, and the Kconfig option
was removed.
Also removed a duplicate Kconfig option for TBS,
BT_TBS_SERVICE_COUNT, as it was unused.
The other Kconfig option BT_TBS_BEARER_COUNT is used
instead exclusively to set it if needed.
Since GTBS can now exist alone, it must also
support having its own calls and other values.
This means that the GTBS and TBS instances now share
the same underlying struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add stm32f746g_disco board to MCO sample.
This board has 2 MCO instances so useful to show multiple instances
as well as checking the implementation.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
Various tests and samples use POSIX-only functions. Define _POSIX_C_SOURCE
to ensure they are visible.
Signed-off-by: Keith Packard <keithp@keithp.com>
Commit 911abc33e6 did move the samples
from subsys/ to drivers/, and more contribution came in parallel.
This covers extra board configurations added later which also need
moving.
Signed-off-by: Josuah Demangeon <me@josuah.net>
The http_client sample ignored connect() errors and attempted to run
HTTP query even if the connection failed.
Additionally, in case the query failed, the sample called `exit(1)`
directly, causing busy-looping in the sample. This prevented the logger
output from being printed.
Both of those issues made the sample behavior very confusing when it
encountered connection problems. The sample did not print any output at
all (due to busy looping) or printed several connect failures (due to
ignoring connect() results). This commit fixes those problems.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Adds missing code-sample directive to the Hello World sample in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to all the arch samples in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fixes bad usage of single backticks in lieu of double backticks for
rendering inline literals, or simple '*' for italics.
When appropriate, a better construct than double backticks has been
selected (ex. :file:, :kconfig:option:, :c:func:, ...), or proper :ref:
have been used if the original intention was to have a link.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to all the tfm_integration samples in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Board samples were listed in a very flat way before.
This commit introduces the appropriate toctrees to fix this.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to all the TI samples in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Enjoydigital board samples in samples/boards/enjoydigital to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Nuvoton board samples in samples/boards/96boards to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Raspberry Pi board samples in samples/boards/raspberrypi to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Google board samples in samples/boards/google to
keep samples/boards/ organized by vendor
Added zephyr-code-sample directive to twinkie sample
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Phytec board samples in samples/boards/phytec to
keep samples/boards/ organized by vendor
Added zephyr-code-sample directive to mesh badge
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Intel board samples in samples/boards/intel to
keep samples/boards/ organized by vendor
Added missing code-sample directive to the code relocation sample.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Quicklogic board samples in samples/boards/quicklogic to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all STM32 board samples in samples/boards/st to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to all the STM32 samples in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Microchip board samples in samples/boards/96boards to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to all the 96boards samples in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all 96boards board samples in samples/boards/96boards to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to all the micro:bit samples in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Phytec board samples in samples/boards/bbc to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to all the NXP samples in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all NXP board samples in samples/boards/nxp to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Nordic board samples in samples/boards/nordic to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to all the nRF samples in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Group all Microchip board samples in samples/boards/espressif to
keep samples/boards/ organized by vendor
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to all the ESP32 samples in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The sync timeout is in 10 ms units. The sync_create_timeout_ms variable
already takes into account that we want to have a timeout of at least
7 events.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
To avoid possible linker warnings, when the linker may end up placing
this section in a segment with text and therefore with execute
permissions, with let's move it next to the .data section.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add kernel reboot support, so can use shell to verify reboot function.
uart:~$ kernel reboot cold
Known issue is imx93 currently can only support cold reboot and doen't
support warm reboot.
Updated board document.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
overhaul sample criteria and what we expect in a sample, especially
overhaul the twister part and what should be provided for good test
coverage.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add testcases for ICBMSG on nRF54L15 with only one endpoint,
including non-multithreading case.
Signed-off-by: Magdalena Pastula <magdalena.pastula@nordicsemi.no>
Mbed TLS automatically sets PSA_WANT_KEY_TYPE_[RSA/ECC]_KEY_PAIR_BASIC
whenever "_IMPORT || _EXPORT || _GENERATE || _DERIVE" operations
are set. Therefore we just set the proper actions where required.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This sample demonstrates how demand paging can be leveraged to deal with
firmware bigger than the available RAM if XIP is not possible. Select
code can be tagged to be loaded into memory on demand, and also be
automatically evicted for more code to be executed when memory is
exhausted.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Added option to set the ASE count through the bap API, making ASE
configuration runtime available. The upper limit of ASEs are still
bound by the Kconfig options set for ASEs.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Dangling hyphens at the end of a line are usually a problem, ie. you
have an "hyphenated-word" and breaking it on two line will render it as
"hyphenated- word".
This commit fixes the few occurences of such dangling hyphens.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The samples were written when UAC2 class supported only full-speed and
it was not clear how the high-speed would be supported.
Add the full-speed property so the samples can work with updated UAC2
implementation.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Without the IPv6-prefix set, the net_if_ipv6_addr_onlink() check
will always fail. The packets with DIP in the local link will go
to 'try_send' code branch, which is not expected.
Signed-off-by: Shrek Wang <shrek.wang@nxp.com>
The second Security object instance for bootstrap case isn't really
needed, as the bootstrap server creates own Security object instances
anyway. As that object instance had no Short Server ID assigned, it
caused failures during bootstrap discovery.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As there is no check (yet!) in the directive, many
.. zephyr-app-commands:: in the documentation are pointing to
non-existing sample applications, which is problematic for users who
typically expect to just copy-paste the commands and have them work.
This commit fixes all offending references to point to existing samples,
or converts them to simple ":app:" instead of ":zephyr-app:" when the
intent wasn't to refer to in-tree samples.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add support for running the audio BSIM tests on the
nrf5340bsim board.
This expands the tests we run in CI.
To support all tests with the hci_ipc sample for the netcore,
it is updated to support a bit more while still fitting on the
netcore on the nRF5340 series.
The behavior of advertisement seems to differ a little bit,
which required the bap_unicast_server_test.c to update how it
restarts advertisements.
Two broadcast tests that are passing on the nRF52 BSIM is also
failing due an assert. This should be investigated at a later
time.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use generic hook infrastrucutre instead of custom Kconfig and hooks for
ARM.
Replace z_arm_platform_init() with platform_reset().
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move the network buffer header file from zephyr/net/buf.h to
zephyr/net_buf.h as the implementation now lives outside of the networking
subsystem.
Add (deprecated) zephyr/net/buf.h header to maintain compatibility with old
file path.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
- Add overlay for the FRDM MCXN947 qspi variant
- Fix the overlay file name for the default variant
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Add standalone STM configuration to the sample.
Add configuration which instead of STM uses local UART for logging.
This configuration can be used to compare performance and flash
usage for various logging modes.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add sample that demonstrates logging using Coresight STM and ETR buffer
handled by the application core. Application is using sysbuild and 2
cores: cpuapp and cpurad. cpuapp is logging to STM and handling ETR buffer
where data from STM is collected and cpurad is only logging to STM.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
The current driver contains assembly code which is specific for the nRF51
SOC which makes it incompatible with other SOC's. This patch adds support
for other nRF SOC's as well. The timing is calucated based on the CPU clock
frequency, but can be configured manually as well if needed.
Changes have been verified on a Adafruit Feather nRF52840 Express board,
which contains a single NeoPixel RGB LED. Timings have been verified using
a scope connected to the WS1812 data line.
Signed-off-by: Chaim Zax <chaim.zax@zaxx.pro>
The ESP32 Wi-Fi driver previously did not support APSTA mode,
enabling AP mode would disable STA mode and vice versa.
Support for APSTA has been added by introducing additional
network interface: one for STA (Interface 2) and one for
AP (Interface 1). The CONFIG_ESP32_WIFI_AP_STA_MODE option in
Kconfig now allows enabling or disabling this support.
Signed-off-by: Muhammad Haziq <muhammad.haziq@zintechnologies.com>
The zephyr-app-commands directive can output a helpful hint to the user
when they are trying to build a sample that is in the Zephyr tree,
telling them to ensure they are in the root folder of the Zephyr repo.
Update all doc pages that were using :app: instead of :zephyr-app: so
that the hint is displayed.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds missing code-sample directive to the remaining samples in
`samples/subsys` that didn't use it yet in preparation for upcoming
changes to the Zephyr documentation that will be leveraging the provided
description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Enabled Network shell and Ethernet L2 interface
with XGMAC driver in CLI application
Enabled MDIO shelll with dwcxgmac mdio driver.
Enabled TCP and UDP over IPV4.
Added intel_socfpga socdk support for echo_client and
echo_server sample applications.
Signed-off-by: Santosh Male <santosh.male@intel.com>
Add a sample that presents how the custom nrf2_clock_control API
introduced for nRF54H20 can be used for the various clocks which
are supported by it.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Updates references to the net-tools project to refer to the correct
placement of net-tools under tools.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The TBS client callbacks are just informative so we
provide the information to multiple listeners.
To support this for the long strings, the function
handle_string_long_read was refactored.
This also allows for multiple users of the TBS client.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
With over a dozen LED samples, grouping them in a common drivers/led/
folder helps keep things tidy and lays the groundwork for further
improvements in the way samples are showing up in the docs.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The flash controller is nowadays supported on the M4 core.
Add the bank2-flash-size property to the board definitions as required
by the STM32 H7 flash driver.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Modify USBD_DEFINE_MSC_LUN() to take in separate id by which the LUNs
are sorted. Previously the disk name itself was implicitly used as a
sorting key. This is a breaking change to Experimental API.
Another advantage of splitting the sorting id from disk name is the
ability to use KConfig symbols as disk name. Currently the MMC disk
driver uses KConfig symbol CONFIG_MMC_VOLUME_NAME.
Mark LUN definitions as static const because the LUNs are ending up in
ITERABLE_SECTION_ROM().
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
[Reproduce issue]
1. Connect In-STA to Ex-AP
wifi connect WiFi_STA_HE_1.1.8 1234567890 3 2 2
2. Start APUT with ACS using below commands
wifi ap enable nxp-AP 161 1234567890 3
3. Connect Ex-STA to APUT and verify association using ping traffic
4. Now start two TCP server
zperf tcp download -I ml 5001 192.168.0.252
zperf tcp download -I up 6002 192.168.10.1
Observed behavior:
=============
Second TCP server fails to start
[Analysis]
1. After starting uap and a tcp server,
there is only one allocatable fd resource
left in the fdtable.
2. When two TCP clients try to establish a connection
with the server at the same time, the second client
cannot be assigned an fd, resulting in a failure.
[Fix]
Increase the maximum number of open file descriptors.
Signed-off-by: Qiankun Li <qiankun.li@nxp.com>
Replace LL_EXTENSION_SYMBOL() with EXPORT_SYMBOL() in all tests and
samples.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Problem:
on cyw208xx devices i see sometime `Timed out while synchronizing`
error in samples periodical_adv_rps/periodical_sync_rps.
log:
<err> bt_scan: Could not lookup connection handle from PAST
<err> bt_scan: Unknown handle 0x0000 for periodic advertising report
Timed out while synchronizing
...
After investigation i can confirm, the sync was created successful,
but in application (periodical_sync_rsp) terminated the sync when the
connection is not valid.
periodical_adv_rps doesn't have any mechanism to wait for sync and after
gatt write (subevent, response_slot information) it immediately
performs disconnection.
Solution:
Added sync wait delay before make disconnection, to ensure sync
is established before disconnection.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Remove print "Failed to receive response...", if receive
BT_HCI_LE_ADV_EVT_TYPE_DATA_STATUS_RX_FAILED.
Problem: with cyw920829m2evk_02 device periodic_adv_rsp returns
multiple messages “Failed to receive response….” in the terminal
log.
This happens because controller generates
HCI LE Periodic Advertising Response Report event for each
RspSlot. Because no RSP_DATA is observed in the OTA, which
is no scan device to transmit RSP_DATA, no RSP_DATA can be
received. Therefore, Data Status is 0xFF in all of these events,
which finally cause the messages “Failed to receive response….”
Data_Status = 0xFF is expected because nothing is received
for that Rsp Slot.
Per spec, it’s not mandatory to generate these events,
So another vendors (e.g. Nordic) might skip the HCI event
generation if Data_Status = 0xFF.
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Stores a magic value togetter with the counter value, and resets the
counter in case that magic does not match.
A small magic value is not ideal, but should be good enough for the
sample and avoids pulling in a additional dependency e.g. on crc.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Also fixed a couple invalid or missing table of contents to have
proper document hierarchy.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The samples had a _iso suffix, but the other ISO samples
prefix iso_.
Renames the central and peripheral sample so that they
prefix iso_ rather than suffix _iso.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
With commit ad242b9, the buffer size was made configurable. Hence, the
corresponding definition CONFIG_SAMPLE_BUFFER_SIZE has to be used when
filling and displaying the buffer.
Signed-off-by: Joerg Hofrichter <joerg.hofrichter@ni.com>
New file with ADC configuration for UCANS32K1SIC evb.
Add ucans32k1sic_s32k146 to platform_allow.
Signed-off-by: Marcin Wierzbicki <marcin.wierzbicki@accenture.com>
This commit changes the default value of CONFIG_HELLO_WORLD_MODE to 'y'
so that the hello_world function is compiled as a built-in part of the
Zephyr image by default. This is the simplest possible configuration,
that works for all architectures.
To build hello_world as an llext module, the user must either follow the
commands in the documentation or set CONFIG_HELLO_WORLD_MODE=m in the
project file along with additional architecture-specific settings that
may be required for proper LLEXT support on the target.
Leave a note in the prj.conf and sample.yaml files to remind the user.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The unicast server now prints when a steam enters the streaming
state.
This commit also slightly increases the metadata size to increase
interoperability with other devices such as Android.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
1) After the wifi driver successfully connects to the AP,
the dormant state should be set to OFF.
Once a deauth/disassoc frame is received or link lost occurs,
the dormant state should be set to ON.
2) Enable CONFIG_NET_TC_SKIP_FOR_HIGH_PRIO and CONFIG_NET_CONTEXT_PRIORITY
to push high priority packets directly to network driver.
Signed-off-by: Gang Li <gang.li_1@nxp.com>
This example demonstrates I2S audio playback combined with the codec
API. It can use the dmic API for audio input.
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>
Commit consists of minimal set of overlays need to run tests
and samples. Additionally disables nRF54L15 platform in cpp98
tests, because unnamed unions are not supported.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
This transforms the existing driver for the Microchip MCP9808
to be used as a generic driver to be used with all
JEDEC JC 42.4 compliant temperature sensor chips.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Added new flag CONFIG_WIFI_NM_HOSTAPD_AP for hostapd support. Once this
flag is enabled, softAP will be setup by hostapd. Both wpa_supplicant
and hostapd uses same task and eloop.
Included necessary hostapd files when compiling wifi samples if
CONFIG_WIFI_NM_HOSTAPD_AP is enabled. Added hostapd support for all
softAP command of L2 wifi shell commands.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
IPPROTO_IPV6 option was set on TCP socket (besides doing it already in
tcp.c) instead of UDP. Fix that.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Drop support for Google Kukui EC board which was used for
early Zephyr experiments but doesn't really exist anymore.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Remove `SPI_NOR_IDLE_IN_DPD` to simplify the possible transition states
in the `spi_nor` driver. This option was originally added 5 years ago
when device runtime PM was in a much less mature state.
I do not believe having a separate power management implementation for
this one in-tree driver is in the interests of the project.
The behaviour of `SPI_NOR_IDLE_IN_DPD` leads to extremly suboptimal
behaviour in use cases where multiple small reads are performed
sequentially, see #69588.
Removal of this option does not break the behaviour of any existing
applications, only increases current consumption in idle by ~10uA until
device runtime PM is enabled.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The driver in tree is for u-blox M8 devices, not M10. The M10 series
devices (from Protocol Version 23.01) use a different, non backwards
compatible interface for configuring the modem behaviour.
Of the two boards tested in the original PR, the "VMU RT1170" is
explicitly listed as having a u-blox NEO-M8N modem, while I have
been unable to find any information online about the "FMURT6" board.
Leaving the naming as-is will cause problems when M10 drivers are
contributed.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The sample illustates how to achieve bidirectional asynchronous audio.
Implicit feedback is the only way to achieve asynchronous USB headset
on devices that have only one isochronous IN and one isochronous OUT
endpoint.
The sample implements stereo playback and mono recording. While it would
be possible to have stereo recording, the commonly available headsets
are mono only. The number of channels can differ between audio sink and
source because the only requirement is that the two run on same clock.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Low throughput links (e.g. IEEE 802.15.4) require additional stack and
buffering resources. Therefore some stack and buffer pool sizes were
increased to cater for over-the-air scenarios.
Fixes: #77287
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
ENABLED suffix does not really makes much sense for a kconfig
so it should be removed. Also other MBEDTLS symbols were recently
updated accordingly.
Moreover having it named exactly the same way as in Mbed TLS
symplifies the understanding of what this kconfig is doing.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Added the battery level status char to bas service
as per bas_1.1 spec. Added BSIM test for BAS service
to test the NTF/INDs of BAS characteristics.
Signed-off-by: Nithin Ramesh Myliattil <niym@demant.com>
Add conn parameter to status/flags callbacks of bt_vcp_vol_rend_cb
to differentiate between remote and local changes.
Signed-off-by: Chang An <chang.an_1@nxp.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add basic WPA2 EAP-TLS support.
Also, add test infrasturcture esp. the certification handling,
non-certificate credentials are take as runtime input and certificated
are build time input for testing.
A real application can set certificates at runtime too.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Exclude the nucleo_h755i_q m4 core from the flash_shell samples,
as the m4 core in stm32h7 parts does not have flash support in Zephyr.
Signed-off-by: Mike Banducci <michael.banducci@sandc.com>
Nrf54h20dk and nrf54l15 have UART Flow Control enabled
by default on all cores.
It's a source of problem when mbox sample is run in Twister.
Twister opens serial port only on host core,
thus nobody confirms reception of logs from remote core.
As a result, remote core stucks on printing boot banner.
Twister fails sample due to the timeout while waiting for messages
from remote to host.
Disable Flow Control on remote core when mbox sample is executed
on nrf54h20 or nrf54l15.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Added mimxrt1040_evk to inregration platforms, so that fxls8974 is tested,
and added config for mimxrt1040_evk to sensor_shell
Signed-off-by: Krystof Sadlik <krystof.sadlik@nxp.com>
DHCPv4 server will probe the offered IP address (send ICMP echo request)
and wait for 1s (default) before offering the address. STA sends out DHCP
discover, but gets no response. Windows automatically assigns the network
card an IP address of 169.254.xx.xx.
So set timeout for ICMP probe sent by the server to 100ms.
Signed-off-by: Gang Li <gang.li_1@nxp.com>
Clean up documentation pages for the new perf tool
as they contained several typos, grammar errors, and
duplicated content between main doc page and sample
page
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Notify only if the device configuration has changed. Pass only the
configuration value as the message status, the actual device speed can
be obtained with usbd_bus_speed().
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Convert users of net_buf_put() and net_buf_get() functions to use
non-wrapped putters and getters k_fifo_put() and k_fifo_get().
Special handling of net_bufs in k_fifos is no longer needed after commit
3d306c181f, since these actions are now
atomic regardless of any net_buf fragments.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Sample was modified to enable pull-down when using EXT1 pins for
wake-up on deep sleep sample in order to simplify testing in case
user doesn't notice external pull-down will be needed otherwise.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
In order to mitigate side channel attacks, even if the PWE is found the WPA
supplicant goes through full iterations, but in some low-resource systems
this can be intensive, so, add an option to exit early.
Note that this is highly insecure and shouldn't be used in production
Signed-off-by: Gang Li <gang.li_1@nxp.com>
To demonstrate the usage of the UATT MTU API to determine if a payload
with its associated length can be sent over a GATT notification.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
The OK response should be processed before entering CMUX mode.
Use UART ISR mode by default.
Fix warnings and errors produced by the sample.
Signed-off-by: Ryan Erickson <ryan.erickson@ezurio.com>
Move samples config files from 'boards' to 'socs' in order to
remove multiple files with the same configuration and render
available samples for new boards. Only changed sample files
which are not board or hardware specific.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Added a websocket connection sending network statistics to a client, to
demonstrate how this can be used to push data to the client as an
alternative to GET requests triggered by a Javascript timer.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Accept JSON payload including LED number and state, to demonstrate JSON
parsing and allow control of multiple LEDs if the board supports this.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Previously the dynamic resource in the http_server sample simply echo'd
the received data back to the sender. This doesn't demonstrate how the
dynamic handlers would be used in a more typical use case, where the
application may need to wait for the full request before acting on it or
creating a response.
Therefore two new dynamic resources have bee added: a '/led' resource
which can be used to control the board's LED (if present) via a POST
request, and a '/uptime' resource which can be used to query the kernel
uptime via a GET request.
The static resources are updated with some javascript to support
demonstrating the new dynamic resouces via a web browser.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
lz4 is moved as optional module, add step in README to add
as project filter to include into west manifest.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/65127
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
all the external modules related samples are part of samples/modules,
whereas lz4 is in parent. move it to sample/modules/compression/lz4
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Provide information how to configure mosquitto >= 2.0
for the mqtt publisher sample. Secondly, how to
configure ethernet interface in case the board is
connected directly to the host computer through LAN.
Signed-off-by: Jasper Jonker <jjasper.jonker@gmail.com>
This sample crates a touchscreen desk calculator based on
the sample state machine in _Practical UML Statecharts in
C/C++_ by Miro Samek.
Sample should build and run on any touchscreen-enabled
board with sufficient resources.
Tested on `disco_l475_iot1` board with
`adafruit_2_8_tft_touch_v2` touchscreen.
Signed-off-by: Glenn Andrews <glenn.andrews.42@gmail.com>
PXP can flip image written to the frame buffer. Provide a mirror image
on the display by flipping the camera image horizontally. Enabled on
boards mimxrt1066_evk and mimxrt1060_evkb.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
Add support for testing IPC between cpuapp<>cpuflpr. Some adjustments
have been done to be able to support two different remote targets for
the nrf54h20dk cpuapp.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Wi-Fi sample is stack heavy, so, by default increase the stack sizes to
work with any driver, esp. those use WPA supplicant like nRF Wi-Fi.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Wi-Fi shell prints scan results to the console taking time and this puts
pressure on net_mgmt Queue, so, increase both timeout and Queue depth to
handle crowded Wi-Fi channel (~200 APs).
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Added a sample application demonstrating how to use the coap_client API
to download a resource via GET request.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Clean up before deprecating legacy device support.
The Linux kernel driver for this example has never been upstreamed or
implemented upstream. In general, 15.4 development does not seem to be a
big success, but if it comes up again, the protocol used by the example
will need to be redesigned anyway.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Clean up before deprecating legacy device support. This sample does not
contain anything special that is not present in the hid-mouse or
hid-keyboard samples. It also makes no sense to port it to a new stack.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Clean up before deprecating legacy device support. Remove
cdc_acm_composite sample, which is not much different than cdc_acm, but
uses two virtual UART interfaces.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Clean up before deprecating legacy device support. Remove configuration
overlay for DFU and MSC, which does not add much value since we have
dedicated samples anyway.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
"Video subsystem for Zephyr" is actually only defined as a driver
and the examples actually include <zephyr/drivers/video.h>.
Signed-off-by: Josuah Demangeon <me@josuah.net>
Enable the Software Watchdog Timer instance on this board.
Now that SWT is enabled for this board and made the default watchdog,
sample.task_wdt.no_hw_fallback can be removed as is no longer needed.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
The commit fixes soc_flash_nrf sample documentation where incorrect
partition names has been used and removes information of
CONFIG_TRUSTED_EXECUTION_NONSECURE affecting which partition is used
as this is no longer true.
The printf message reporting start of sample has been modified
to print "Nordic nRF5 Flash Sample" instead of
"Nordic nRF5 Flash Testing", which is more accurate for code
residing in samples.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This has been renamed in b6ed4ba761, the current entry is causing a CI
breakage for unrecognized platform.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add acmp pinctrl configuration to support ACMP driver for NXP frdm_ke17z
and frdm_ke17z512, tested 'sample.sensor.mcux_acmp' case.
Update the index.rst to add acmp description for ke17z.
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
Some boards claim `sdhc` support but use the `zephyr,mmc-disk`
instead of `zephyr,sdmmc-disk` compatible, with the former not being
compatible with this sample.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Move the check for valid disk drivers to compile time to enable twister
to run the configure step without errors.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Remove HTS221 sensor support from sensortile_box_pro as it has been ruled
out from final version. In fact, HTS221 is in the process of being
terminated and is not recommended for new design. The candidate replacement
is SHT40 from Sensirion, which is available also as a DIL24 adapter, which
can be plugged on sensortile_box_pro board.
See SENSEVAL-SHT4XV1:
https://www.st.com/en/partner-products-and-services/senseval-sht4xv1.html
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The documentation does not provide any guides on how to configure
the MCO pin, and responsebility is given to the application.
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
Rename usbd_device_set_bcd() to usbd_device_set_bcd_usb() to make room for
other BCD encoded values being set.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
In the sample, print the jesd216_bfp_density is expressed
in bits. add the unit to avoid confusion with the Flash
density expressed in bytes (dw2 entry)
Page size is for programming expressed in bytes, meaning
program execution on bytes basis or here page basis.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add the configuration with a board overlay to execute
the samples/subsys/task_wdt on the nucleo_f091rc
Adjust the window-watchdog clock to PASS the test.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add broadcast support to the CAP initiator sample.
This adds new sample-specific Kconfig options to help
select the right Kconfig options based on whether
unicast, broadcast or both is being used.
This also moves common TX functionality
to cap_initiator_tx to reuse the same TX thread
and functionality.
Finally there is a babblesim implemented for
the broadcast. There is not broadcast support for the
CAP acceptor sample yet, so this test only verifies that we
get the TX complete events from the controller.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a void *user_data pointer to the input callback structure. This is
useful for driver to get back the driver data structure and avoid
defining wrapper functions.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Appropriately setting the `--target` flag is necessary when using clang
and building for a target other than the default. Zephyr generally
accomplishes this by setting the CMAKE_<LANG>_COMPILER_TARGET variables and
allowing cmake to automatically provide the `--target` flag when building.
For the external_lib sample, however, cmake can't add the flag and it was
not otherwise exported. As such, clang typically threw errors when building
this sample for any non-default targets due to mismatches between
target-specific flags and the default target.
To fix this, ensure we select the correct target by checking if
CMAKE_C_COMPILER_TARGET has been defined and adding
`--target=<triple>` to the list of flags that are exported if so.
Signed-off-by: Jonathon Penix <jpenix@quicinc.com>
This commit adds a brief thread b suspend while the sample sets its
affinity mask.
If the call to `k_thread_cpu_pin` is being made while the thread is
actively running, then we get `-EINVAL` and the affinity mask is left
unchanged.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
The button sample is really a gpio interrupt sample, one may easily miss
the debounced driver and think it's not provided.
Add a note in the basic button sample documentation to refer to the
input subsystem doc and sample.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
twister expects regex print from logging used in the sample. Sample
is using minimal logging which does not protect against logs being
interleaved if printed from various contexts. Minimal logging is
just mapping of logging API to printk. Add CONFIG_PRINTK_SYNC to
ensure that printing of each log is synchronous (with lock) and
logs are never interleaved.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Now that flash controller driver is supported on M4 of stm32h745i_disco,
remove it from platform_exclude list and add an overlay for flash_shell
sample.
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
Now that flash controller driver is supported on M4 of stm32h747i_disco,
remove it from platform_exclude list and add an overlay for flash_shell
sample
Signed-off-by: Murali Karicheri <murali.karicheri@sandc.com>
Introduce UDC_BUF_POOL_*_DEFINE macros based on NET_BUF_POOL_*_DEFINE
macros but use our own version of alloc and unref callbacks to get
buffers with specific alignment and granularity. Also, do not use ref
callback because it breaks alignment.
Also introduces helper macros for defining and checking UDC
driver-compliant static buffers.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The accel_polling sample uses various sensor, but doesn't set a sampling
rate. But some sensors (like st,lsm6dso) have a default sampling
frequency of 0. So, depending on the sensor, the sample may not always
work.
There are two ways to fix this: either all drivers must set a valid
sampling rate, or the sample shall at least try to set a value if there
is none.
We propose here the second approach, wich should allow the sample to
work on more sensors out of the box.
Signed-off-by: Miguel Gazquez <miguel.gazquez@bootlin.com>
Added i2c configuration to test target_eeprom case for frdm_ke17z
Added `sample.drivers.i2c.target.kinetis` in sample.yaml for frdm_ke17z
and frdm_ke17z512 automatically run the tests
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
Updates the output sample to more closely resemble the output for a
recent Zephyr version (current was v1.14). Fixes#76275.
Updates broken tf-m documentation link to their new URL.
Signed-off-by: Adrien Leravat <adrien.leravat@gmail.com>
If config library is disabled but DHCPv4 client is enabled,
then start DHCPv4 when zperf application starts.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Refactors teh BIS bitfield values used for ISO
and BAP.
Previously BIT(1) meant BIS index 1, which was a Zephyr choice
in the early days of ISO, as the BT Core spec did not use
a bitfield for BIS indexes.
Later the BASS specification came along and defined that
BIT(0) meant BIS index 1, which meant that we had to shift BIS
bitfields between BAP and ISO.
This commit refactors the ISO layer to use BIT(0) for Index 1 now,
which means that there is no longer a need for conversion
between the BAP and ISO layers, and that we can use a value
range defined by a BT Core spec (BASS).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
