Add usage example for sys_trace_user_event, to demonstrate how users
could add tracing functionality to their application.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Use EXTRA_CONF_FILE in sample yaml files,
that replaced deprecated OVERLAY_CONFIG
since the Zephyr v3.4 release.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Currently, Zephyr is always sending back notifications to
AP (e.g Linux in our case) on channel 0.
But this currently doesn't work if Linux uses other channel
id for communication. So, add option to use predefined
vring ID that can accomodate Linux used ID.
Signed-off-by: Alexandru Lastur <alexandru.lastur@nxp.com>
ZBus currently does not have a `HEAP_MEM_POOL_ADD_SIZE_ZBUS` when using
message subscribers or runtime observers, forcing the developer to set that
manually. Adding the configuration option to zbus would improve its
usability and make zbus easier to use. With this feature, zbus aligns with
the other Zephyr subsystems' heap memory allocation approach.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
The sample is supposed to help examine the issues with touchscreen.
It draws a plus in last touched position.
Signed-off-by: Dominik Lau <dlau@internships.antmicro.com>
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
The host-based adv auto-resume function has both a problematic
implementation and disagreement in the community around how it should
behave. See the issue linked resolved below for details.
This patch makes the deprecation visible to the user. The user will be
better served by a auto-resume tailored their applications use case,
based on more primitive host API like `conn_cb.recycled`, which has
obvious behavior that is unlikely to change.
Resolves: https://github.com/zephyrproject-rtos/zephyr/issues/72567
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Disable CDC ACM logging in the configuration overlays used to select the
CDC ACM UART as the shell backend.
The build warning was introduced by the commit e8c4867806
("usb: cdc_acm: disable logging if used for shell with logging")
to prevent recursive logging when using the CDC ACM UART as shell or
logging backend
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
MAX32662EVKIT board has CFAF128128B1-0145T display which
is 128x128 graphic display.
This commit enable mpi dbi display support with LVGL graphic library.
Pin connection of display is 3wire mode
SRAM size increased to be fit with lvgl example.
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Add the dts and config overlay for the two boards in order
to have the openamp_rsc_table sample working on
HiFi4 DSP from i.MX8QM and i.MX8QXP.
Since these two are similar, use a snippet.
Therefore, to compile the sample we use:
west build -p -b imx8qm_mek/mimx8qm6/adsp -S nxp-openamp-imx8-adsp
-s samples/subsys/ipc/openamp_rsc_table/
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
A virtual metal_device is created, next the needed IO regions are created
and added to this device. Immediately we extract these regions back out
and make use of them. There is no reason to create the metal_device and
add the IO regions to it, instead simply use the IO regions directly.
This is similar to what was already done to the openamp_rsc_table sample.
Signed-off-by: Andrew Davis <afd@ti.com>
This is in preparation for adding another SoC where qemu_xtensa
is no longer valid choice. So use qemu_xtensa/dc233c as it is
the same as the old qemu_xtensa.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Adds custom overlay and config allowing the fs_sample to run on
the stm32f746g_disco with DMA enabled.
Signed-off-by: Maciej Sobkowski <msobkowski@antmicro.com>
Adds NXP platforms to the smp_svr sample allow list,
for overlay-serial.conf and overlay-shell.conf.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Align all existing samples/tests/applications which
contains nrf54l15pdk/nrf54l15/* by adding
nrf54l15dk/nrf54l15/* to enable twister builds.
Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no>
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated. Let's switch the filter and build
checks to native_sim instead.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building this sample in both native_sim and native_posix does not
improve coverage for the sample or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for this sample.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Used the SMP_BT_SVC_UUID_VAL define exposed in the smp_bt header
in the smp_svr sample instead of hardcoding its value.
Signed-off-by: Mateusz Kapala <mateusz.kapala@nordicsemi.no>
This commit uses the new .. zephyr:code-sample-category directive to
categorize code samples across the tree.
Updates existing legacy references to manually defined targets to now
use :zephyr:code-sample-category: role instead.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Was getting compilation error due to `CONFIG_SHELL_CMD_ROOT`
not being defined whe building the sample under certain
configurations.
The `CONFIG_SHELL_CMD_ROOT` is defined and used only when
`CONFIG_SHELL_START_OBSCURED` is enabled, we can simply move
it to another file and rely on CMakeLists.txt to compile.
Run the `login_init` with `SYS_INIT` so that the `main()`
do not need to have knowledge of its existence.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Added new Kconfigs for defining permission level of GATT
characteristics that are part of the Bluetooth SMP service in the
MCUmgr subsys.
Removed the CONFIG_MCUMGR_TRANSPORT_BT_AUTHEN as the new Kconfig
options are mutually exclusive and need to be groupa as the Kconfig
choice option.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Commit 911abc33e6 did move the samples
from subsys/ to drivers/, and more contribution came in parallel.
This covers extra board configurations added later which also need
moving.
Signed-off-by: Josuah Demangeon <me@josuah.net>
Adds missing code-sample directive to the Hello World sample in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fixes bad usage of single backticks in lieu of double backticks for
rendering inline literals, or simple '*' for italics.
When appropriate, a better construct than double backticks has been
selected (ex. :file:, :kconfig:option:, :c:func:, ...), or proper :ref:
have been used if the original intention was to have a link.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add kernel reboot support, so can use shell to verify reboot function.
uart:~$ kernel reboot cold
Known issue is imx93 currently can only support cold reboot and doen't
support warm reboot.
Updated board document.
Signed-off-by: Jiafei Pan <Jiafei.Pan@nxp.com>
Add testcases for ICBMSG on nRF54L15 with only one endpoint,
including non-multithreading case.
Signed-off-by: Magdalena Pastula <magdalena.pastula@nordicsemi.no>
This sample demonstrates how demand paging can be leveraged to deal with
firmware bigger than the available RAM if XIP is not possible. Select
code can be tagged to be loaded into memory on demand, and also be
automatically evicted for more code to be executed when memory is
exhausted.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The samples were written when UAC2 class supported only full-speed and
it was not clear how the high-speed would be supported.
Add the full-speed property so the samples can work with updated UAC2
implementation.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
As there is no check (yet!) in the directive, many
.. zephyr-app-commands:: in the documentation are pointing to
non-existing sample applications, which is problematic for users who
typically expect to just copy-paste the commands and have them work.
This commit fixes all offending references to point to existing samples,
or converts them to simple ":app:" instead of ":zephyr-app:" when the
intent wasn't to refer to in-tree samples.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Use generic hook infrastrucutre instead of custom Kconfig and hooks for
ARM.
Replace z_arm_platform_init() with platform_reset().
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move the network buffer header file from zephyr/net/buf.h to
zephyr/net_buf.h as the implementation now lives outside of the networking
subsystem.
Add (deprecated) zephyr/net/buf.h header to maintain compatibility with old
file path.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Adds missing code-sample directive to the remaining samples in
`samples/subsys` that didn't use it yet in preparation for upcoming
changes to the Zephyr documentation that will be leveraging the provided
description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Modify USBD_DEFINE_MSC_LUN() to take in separate id by which the LUNs
are sorted. Previously the disk name itself was implicitly used as a
sorting key. This is a breaking change to Experimental API.
Another advantage of splitting the sorting id from disk name is the
ability to use KConfig symbols as disk name. Currently the MMC disk
driver uses KConfig symbol CONFIG_MMC_VOLUME_NAME.
Mark LUN definitions as static const because the LUNs are ending up in
ITERABLE_SECTION_ROM().
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Replace LL_EXTENSION_SYMBOL() with EXPORT_SYMBOL() in all tests and
samples.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
This commit changes the default value of CONFIG_HELLO_WORLD_MODE to 'y'
so that the hello_world function is compiled as a built-in part of the
Zephyr image by default. This is the simplest possible configuration,
that works for all architectures.
To build hello_world as an llext module, the user must either follow the
commands in the documentation or set CONFIG_HELLO_WORLD_MODE=m in the
project file along with additional architecture-specific settings that
may be required for proper LLEXT support on the target.
Leave a note in the prj.conf and sample.yaml files to remind the user.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The sample illustates how to achieve bidirectional asynchronous audio.
Implicit feedback is the only way to achieve asynchronous USB headset
on devices that have only one isochronous IN and one isochronous OUT
endpoint.
The sample implements stereo playback and mono recording. While it would
be possible to have stereo recording, the commonly available headsets
are mono only. The number of channels can differ between audio sink and
source because the only requirement is that the two run on same clock.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Clean up documentation pages for the new perf tool
as they contained several typos, grammar errors, and
duplicated content between main doc page and sample
page
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Notify only if the device configuration has changed. Pass only the
configuration value as the message status, the actual device speed can
be obtained with usbd_bus_speed().
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Move samples config files from 'boards' to 'socs' in order to
remove multiple files with the same configuration and render
available samples for new boards. Only changed sample files
which are not board or hardware specific.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
This sample crates a touchscreen desk calculator based on
the sample state machine in _Practical UML Statecharts in
C/C++_ by Miro Samek.
Sample should build and run on any touchscreen-enabled
board with sufficient resources.
Tested on `disco_l475_iot1` board with
`adafruit_2_8_tft_touch_v2` touchscreen.
Signed-off-by: Glenn Andrews <glenn.andrews.42@gmail.com>
PXP can flip image written to the frame buffer. Provide a mirror image
on the display by flipping the camera image horizontally. Enabled on
boards mimxrt1066_evk and mimxrt1060_evkb.
Signed-off-by: Derek Snell <derek.snell@nxp.com>
Clean up before deprecating legacy device support.
The Linux kernel driver for this example has never been upstreamed or
implemented upstream. In general, 15.4 development does not seem to be a
big success, but if it comes up again, the protocol used by the example
will need to be redesigned anyway.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Clean up before deprecating legacy device support. This sample does not
contain anything special that is not present in the hid-mouse or
hid-keyboard samples. It also makes no sense to port it to a new stack.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Clean up before deprecating legacy device support. Remove
cdc_acm_composite sample, which is not much different than cdc_acm, but
uses two virtual UART interfaces.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Clean up before deprecating legacy device support. Remove configuration
overlay for DFU and MSC, which does not add much value since we have
dedicated samples anyway.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
"Video subsystem for Zephyr" is actually only defined as a driver
and the examples actually include <zephyr/drivers/video.h>.
Signed-off-by: Josuah Demangeon <me@josuah.net>
Enable the Software Watchdog Timer instance on this board.
Now that SWT is enabled for this board and made the default watchdog,
sample.task_wdt.no_hw_fallback can be removed as is no longer needed.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
This has been renamed in b6ed4ba761, the current entry is causing a CI
breakage for unrecognized platform.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Some boards claim `sdhc` support but use the `zephyr,mmc-disk`
instead of `zephyr,sdmmc-disk` compatible, with the former not being
compatible with this sample.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Move the check for valid disk drivers to compile time to enable twister
to run the configure step without errors.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Rename usbd_device_set_bcd() to usbd_device_set_bcd_usb() to make room for
other BCD encoded values being set.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Add the configuration with a board overlay to execute
the samples/subsys/task_wdt on the nucleo_f091rc
Adjust the window-watchdog clock to PASS the test.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add a void *user_data pointer to the input callback structure. This is
useful for driver to get back the driver data structure and avoid
defining wrapper functions.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
twister expects regex print from logging used in the sample. Sample
is using minimal logging which does not protect against logs being
interleaved if printed from various contexts. Minimal logging is
just mapping of logging API to printk. Add CONFIG_PRINTK_SYNC to
ensure that printing of each log is synchronous (with lock) and
logs are never interleaved.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Introduce UDC_BUF_POOL_*_DEFINE macros based on NET_BUF_POOL_*_DEFINE
macros but use our own version of alloc and unref callbacks to get
buffers with specific alignment and granularity. Also, do not use ref
callback because it breaks alignment.
Also introduces helper macros for defining and checking UDC
driver-compliant static buffers.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Change USBD_CONFIGURATION_DEFINE macro to take the address of a string
descriptor node as an argument. This is a breaking change for macro
users, but quite convenient and easy to implement.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
It looks like sample called nrf53_cpunet_enable(false) before any
nrf53_cpunet_enable(true), resulting in asserts due to unbalanced calls
(error propagated from onoff service).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Remove references to new device APIs that are not supported by the
samples. Remove the reference to the UART API from the console sample
because it is not really used there, but add it to the CDC ACM sample.
Fix references in HID, MSC and UAC2 samples.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Those platfroms use rtt as debug port that conflicts with usermode, as
in 27d519b260.
Fixes#75617
Signed-off-by: Guy Morand <guy.morand@bytesatwork.ch>
Use the message queue to pass the new report from the input callback,
and use a semaphore to protect the report buffer until it is transferred
to the host.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Replace platform_allow with integration_platforms, what allow CI to
build samples on all platforms with test feature 'usbd' but still limits
number of platforms when it is invoked with the --integration option.
Replace/add some platforms that already have test feature 'usbd'.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Update zephyr-app-commands to generate "west build --shield ..." for west
invocations using shields while still generating "cmake .. -DSHIELD=..."
if the tool is set to "cmake".
Updated the various shield documentation pages to recommend using
"--shields" over "-DSHIELD" to match the results of the corresponding
zephyr-app-commands code snippets.
Add proper support to zephyr-app-commands for specifying multiple shields
(using a comma-separated list) and fix a few invocations to use this.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The current version of scipts do not consider OOT boards use cases and
the tests with robot now are strict to only one robot file, which is
not realistic for real environment. This address those issues and allow
multiple testsuits at command line and lists at tests entries. It add
another test parameter to allow configure robotframework options.
Fixes: #74563
Signed-off-by: Gerson Fernando Budke <gerson.budke@ossystems.com.br>
Uses the variable for the default image when adding sysbuild
dependencies so that they can be copied out-of-tree and still work
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
"ZEPHYR FATAL ERROR 2: Stack overflow on CPU 0" observed on a few
supported platforms when using SD card disk. Increase main stack size
for next USB device stack configuration to prevent stack overflow.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
`checkpatch.pl` requires that dts sources are indented with tabs,
fix all the spaces that slipped in while checkpatch wasn't watching.
Signed-off-by: Jordan Yates <jordan@embeint.com>
This patch reworks the testcase.yaml and sample.yaml files for the llext
subsystem to further reduce the number of tests performed by CI while
improving overall coverage.
The following changes are introduced by this commit:
- Remove the arch_allow field from the common section to allow any arch
to be tested in the build_only test. All other tests explicitly narrow
down the arches they are applicable to.
- In addition to platforms with active issues, also exclude a number of
platforms that are always skipped by the runtime filter due to
RAM/Flash limitations.
- Add integration_platforms to limit the test count to a few selected
platforms which are representative of the different arches.
- Remove a number of duplicate SLID tests and group them into a single
test that covers both ARM and Xtensa architectures.
- Test the relocatable case on ARM as well.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This patch sets the default value for LLEXT_STORAGE_WRITABLE to 'y' on
the Xtensa architecture. This is necessary because it does not currently
support the read-only mode for the LLEXT storage.
Make sure the default reflects this instead of asking the user to
manually set it.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
This commit increases the size of the main stack for the LLEXT sample
subsys/llext/modules, which otherwise overflows the stack on several
platforms.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Removes the check for whether or not the kscan kconfig option is set to
change the GUI accordingly.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Add documentation about USB message notifications. Use literalinclude to
pull code snippets from the samples.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add isolated pool (static and dynamic) to the sample illustrating how to
use that and performing some testing in different scenarios.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
As part of ongoing work to move away from TinyCrypt and towards PSA
(#43712), introduce a PSA option and remove the TinyCrypt one for the
SHA-256 implementation.
The Mbed TLS implementation is modified to use `mbedtls_sha256`
directly for smaller code size.
The reliance of mgmt/updatehub on storage/flash_map's configuration
(`FLASH_AREA_CHECK_INTEGRITY_BACKEND`) is removed.
The choice of which implementation to use is made automatically,
based on whether a PSA API provider is present (`PSA_CRYPTO_CLIENT`).
This commit also add a test case with PSA (based on Mbed TLS)
in samples/subsys/mgmt/updatehub/sample.yaml.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Run the sample on the IWDG of stm32f4 nucleo boards
instead of WWDG because the APB1 prescaler cannot set
the WWDG input clock source to match the wd timeout.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This adds a new sample to demonstrate the use of tristate symbols
in Kconfig to build a function as an llext module or as a built-in
part of Zephyr.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Improve the sample application by displaying the captured frames instead
of just discarding them.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
In order to be generic, use a chosen node for camera so that the sample
is not specific to NXP SoCs. Also, always favorite a real video device
unless it is unavailable.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
There are some compatibilty situations where carriage return does not
work (e.g. on Serial Monitor in VSCode). Moreover, keeping the
timestamps logs on the console would help to have an idea about the
frame rate. So, it's better to use line feed instead of carriage return
in this case.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The mt9m114 camera shield is now added. There are also some changes in
the mt9m114 camera driver, e.g. frame rate, default format, capabilities.
Update the sample document and test to reflect these changes.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
Add initial documentation how to configure and enable new USB device
support. Use literalinclude to pull code snippets from the samples.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add CMSIS DAP sample using USB as interface.
Signed-off-by: Maximilian Deubel <maximilian.deubel@nordicsemi.no>
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
We have some other simpler CDC ACM and HID samples in the tree.
Providing multiple functions is a core functionality of USB device
support, and we have other samples to demonstrate this as well. This
sample does not really provide anything unique, but has a few issues
such as unsafe HID buffer handling and calling uart_fifo_fill() outside
of the UART driver's IRQ context.
Remove the hid-cdc sample, as there is no value in this sample, and to
avoid spending time fixing and cleaning up the code.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The polling properties are a period in us but are named as "-rate" right
now, which would imply that that's a frequency. Rename them to
"period-us" to make that unambiguous.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
I/O Devices were meant to be handles of sorts and had a built in mpsc queue
as this made sense initially. As time has gone on it turned out that often
we wanted the mpsc queue to be an implementation detail hidden in a driver.
In fact pretty much all drivers work this way now.
Keeping the struct mpsc queue as a member of rtio_iodev meant wasted memory
in cases where it wasn't used. It also meant a bit of confusion as the
queue might be accidently used in places where it shouldn't be.
Remove the mpsc queue member from struct rtio_iodev and the last remaining
usages of it. Will ensure RTIO for 3.7 LTS avoids causing unneeded churn
for future users.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Remove pre hardware model v2 overlays present for RT11xx boards, that
were missed in the HWMv2 migration
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Unmount and remount filesystem during init, to verify that filesystem
remount works as expected.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Removes references to old tool documentation and refers users to
the list of supported applications instead
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Update the sample to use a camera shield with a camera chosen node.
This is not only because the camera nodes in the mimxrt1064 device
tree has been now moved to a separate mt9m114 shield but also to
make the sample more generic.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
The default resolution of mt9m114 camera is now changed to 480x272.
Update the sample documentation to reflect this change.
Signed-off-by: Phi Bang Nguyen <phibang.nguyen@nxp.com>
