Decouple dependency of CONFIG_NXP_WIFI_SOFTAP_SUPPORT.
Add wifi defconfig to set default kconfig options when soft AP
enabled.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Current DSA sample is initially for ip_k66f board with a switch PHY,
while it is expected as a common DSA sample for all DSA devices.
This patch does not change any function. It only reworks the sample
with new added CONFIG_NET_SAMPLE_DSA_LLDP for ip_k66f with 3 LAN
ports.
Ideally this should be common for all DSA devices, but for now, ip_k66f
is the only platform supporting it.
As there will be more DSA functions supported, better to allow each
function enablement via option to suit hardware or device driver support
status.
Also improved dsa_ll_addr_switch_cb return value with enum value instead
of plain value.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
"ca.der" contains an RSA key, but this file is now useless for this sample
as the sample is using EC keys. It's likely a leftover from some initial
development, so it can be removed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Add a section with a practical example on how to build the sample in
order to test it with:
- real device
- ethernet over USB
and test it with a Linux host system.
Fix also references to overlay files that must be enabled to build the
HTTPS version.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This commit also moves the TLS (overlay) configuration to a separate file
named "overlay-tls.conf". In this way the simple HTTP (without TLS) will
not enable Mbed TLS.
A new test case is added to sample.yaml to test HTTPS scenario.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
The sample needs a bit more resources. The existing build
assert complains about this
error: static assertion failed: "CONFIG_ZVFS_POLL_MAX must be larger than
((1 + (2 + 0)) + (3 + 3) + 0)"
include/zephyr/net/dns_resolve.h:146:1: note: in expansion of macro
'BUILD_ASSERT'
146 | BUILD_ASSERT(CONFIG_ZVFS_POLL_MAX >= DNS_DISPATCHER_MAX_POLL,
| ^~~~~~~~~~~~
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
VLANs need to be initialized before the wait_for_network() call
so that VLAN interfaces are ready at the start.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Since a separate CONFIG_NET_TC_RX_SKIP_FOR_HIGH_PRIO was introduced for
RX TC queues, CONFIG_NET_TC_SKIP_FOR_HIGH_PRIO became ambiguous,
rename it to CONFIG_NET_TC_TX_SKIP_FOR_HIGH_PRIO and deprecate the old
config.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There's no point building the sample for platforms that do not support
networking, hence add netif dependency to reduce the CI execution
scope.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A _res_fallback parameter to HTTP_SERVICE_DEFINE is added to optionally
specify a fallback resource detail, which will be served if no other
resource matches the URL.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
This issue is seen by at least gcc 11.4.0
samples/net/sockets/http_get/src/http_get.c:44:40: warning:
format ‘%d’ expects argument of type ‘int’, but argument 2
has type ‘ssize_t’ {aka ‘long int’} [-Wformat=]
44 | #define CHECK(r) { if (r < 0) {
| printf("Error: %d\n", r); exit(1); } }
| ^~~~~~~~~~~~~
samples/net/sockets/http_get/src/http_get.c:44:49: note: format string is
defined here
44 | #define CHECK(r) { if (r < 0) {
printf("Error: %d\n", r); exit(1); } }
| ~^
| |
| int
| %ld
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Change the name of the mimxrt1060_evk conf file (mimxrt1060_evk.conf) to
the correct name, "mimxrt1060_evk_mimxrt1062_qspi.conf". This change
causes net related code to be placed into ITCM on mimxrt1060_evk boards
Signed-off-by: Jacob Wienecke <jacob.wienecke@nxp.com>
In order to show how to use OpenThread and CoAP, add an application.
This example could be build to run a client or server.
The server could expose LEDs and buttons and client could get their
state and set the LEDs state.
The network is created automatically using the network key predefined
in the config. The goal is to make the example simple by removing
the commisionning and joinning process.
If a client application has a button, it could use it to toggle the first
LED on any boards running the server application.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
This sample is expected to hit google.com so that the reply
(a redirect) is minimal and can easily be visualized. This is also
what sample.yaml expects to see (checks for "The document has
moved").
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add support for the pinnacle_100_dvk and mg100.
With these boards, wait to get on the network before trying
to connect to AWS.
Signed-off-by: Ryan Erickson <ryan.erickson@ezurio.com>
Add overlay and small adjustments for using the hl7800 modem.
Works out of the box with pinnacle_100_dvk and mg100.
Signed-off-by: Ryan Erickson <ryan.erickson@ezurio.com>
Add an overlay for hl7800 modem configuration.
Adjust the client to wait until the network is ready before
trying to connect to the lwm2m server.
Signed-off-by: Ryan Erickson <ryan.erickson@ezurio.com>
Using NET_TCP_MAX_SEND_WINDOW_SIZE and NET_TCP_MAX_RECV_WINDOW_SIZE
for TCP case.
Reduce net_buf count to save memory.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Disable vt100 commands too in websocket console, not only the coloring.
This allows to prevent printing artifacts in websocket shell backend
logging.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Passing HTTP upgrade request context to the user callback allows the
user to decide whether to accept or reject the websocket connection
based on the HTTP headers in the request. The primary reason for this is
to enable authentication of the websocket connection (e.g. via cookies
or Authorization header).
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
By default OpenThread uses storage API to store configuration options.
On for example mimxrt1020_evk the enabled by default is
CONFIG_SETTINGS_NONE when CONFIG_SETTINGS is enabled. Fix this problem by
using the CONFIG_SETTINGS_NVS=y.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
The network log backend had the POSIX_C_LANG_SUPPORT_R
dependency added in a previous commit, but the dependency was
never added to the sample.
Add the dpeendency of LOG_BACKEND_NET to the
samples/net/syslog_net/prj.conf
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Add settings to get peak throughputs for nRF7002DK, this relies on the
overlay-wifi-nm-hostap.conf.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This sample works without increasing ZVFS_OPEN_MAX and ZVFS_POLL_MAX to
some arbitrary number. This also removes a duplicate entry for
ZVFS_OPEN_MAX.
ZVFS_OPEN_MAX already defaults to a reasonably large value of 16 if
POSIX_API is enabled, which is the case for the echo_service sample.
Signed-off-by: Marc Lasch <marc.lasch@husqvarnagroup.com>
For waking up the poll() use eventfd() instead of socketpair()
so we save some buffer space and one file descriptor.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
When using tickless mode, the socketpair()
seem to use heap by default on native_sim, so
add some space for it.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
This description provides information about setting up RCP (nRF21540-DK)
and OT HOST (mimxrt1020_evk) to communicate with HOST PC's echo_server
via OpenThread Border Router (OTBR).
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This overlay configures the imxrt1020 EVK board to use its lpuart2 serial
port to communicate with other board (in this case nRF21540-DK), which
is the RCP for OpenThread protocol.
The nRF Zephyr RCP is the one from Nordic (v2.7.0):
west build -p always -b nrf21540dk/nrf52840 -S logging
nrf/samples/openthread/coprocessor
The same UART (on nRF) can be used for testing/debugging purposes with
using the ot-cli's SPINEL communication program:
sudo ./build/posix/src/posix/ot-cli 'spinel+hdlc+uart:///dev/ttyACM1?u
art-baudrate=1000000' --verbose
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This config allows setting up the echo_client program with
RCP HOST UART (via SPINEL protocol) communication.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Convert vendor specific **_WIFI_BUILD_ONLY_MODE symbol as global
in order to provide common build flag to enable CI with no blobs.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
