Make use of ABUS support in the pinctrl driver to allocate
analog buses, rather than hard-coding bus 0 in the ADC driver.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
The AD4114 is a low power, low noise, 24-bit, sigma-delta ADC.
This driver allows to use it with the Zephyr ADC API. It uses
the continuous acquisition ADC feature.
This ADC allows many configutations, but this driver uses it as the
most generic way :
- each can channel can be enable or disable using the device
tree configuration
- configure two setups (one for unipolar inputs, one for bipolar inputs)
- use an external clock
Signed-off-by: Pierrick Curt <pierrickcurt@gmail.com>
The Atmel SAM0 SoC enable peripherals clocks in distinct places: PM and
MCLK. The old devices had defined the peripheral clock enable bit at PM.
On the newer devices this was extracted on a dedicated memory section
called Master Clock (MCLK). This change excludes the dedicated bindings
in favor of a generic approach that cover all cases.
Now the clocks properties is complemented by the atmel,assigned-clocks
property. It gives the liberty to user to customize the clock source
from a generic clock or configure the direct connections.
All peripherals drivers were reworked with the newer solution.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
STM32 sequencer property and clock source were defined using
arbitrary numbers. Use string instead.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
On STM32 ADC, there are currently two types of oversamplers (if present),
one with 8 available oversampling values, the other with 1024.
To simplify the driver, add the oversampler as a dts property.
Also add defines to avoid magic values in the dtsi.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
- Add "channel-available-mask" property in ADC node
to detect which channels are available to use
- Add "add-average-count" property in ADC node to chose
number of count of the addition or average mode
- Change the source code of ADC to match with 2 new properties.
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
LJ packages have 16 ADC channels vs 8 for SZ packages. Enhance
devicetree to account for this as well as conditional defines/code.
Signed-off-by: Jeff Daly <jeffd@silicom-usa.com>
Rename "nxp,kinetis-adc12" compatible to "nxp,adc12" to remove the
device family from its name.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
-Update formatting and contents of index.rst for cy8ckit_062s4
-Update formatting and contents of index.rst for cy8ckit_064s0s2_4343w
-Update formatting and contents of index.rst for cy8cproto_062_4343w
-Update formatting and contents of index.rst for cy8cproto_063_ble
-Update formatting and contents of index.rst for xmc45_relax_kit
-Update formatting and contents of index.rst for xmc47_relax_kit
-Change all instances of "PSoC" to "PSOC" for infineon platforms
Signed-off-by: McAtee Maxwell <maxwell.mcatee@infineon.com>
These properties should eventually be removed from this binding as they
have been introduced to control soc specific clock trees and don't
correlate to anything in the IP, but for now just make them not required
and remove them from DT for SOCs that don't even use them.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Update ADC bindings documentation to state that a domain clock is now
necessary if asynchronous clock is selected.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Register all the lpi2c instances.
Add no-power-level property and update driver
to adapt no-power-level property.
Signed-off-by: Lucien Zhao <lucien.zhao@nxp.com>
Add the vref reference voltage in the DTS, so that the adc driver
can retrieve the value for conversion.
Signed-off-by: Marcin Wierzbicki <marcin.wierzbicki@accenture.com>
Some hardware configuration require rely on the ALERT/RDY
pin to know when and ADC conversion is completed.
The polling thread is left as fallback, when the pin
is not defined.
Signed-off-by: Efrain Calderon <efrain.calderon.estrada@gmail.com>
The "channels-num" should not be used here, other system's parts are using
"channel-count" instead for the same purpose.
Also property's description has been сorrected.
Signed-off-by: Andrey VOLKOV <andrey.volkov@munic.io>
This commit removes the requirement for pinctrl in the STM32 ADC binding.
This allows usage of ADC with internal channels only (no GPIO pin waste).
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Rename ad5592 files in dts, driver and include to ad559x and add support
for I2C bus which is required for AD5593.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Utilize a code spell-checking tool to scan for and correct spelling errors
in all files within the dts/bindings/adc and arm.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Move the nRF comparator devicetree bindings from ADC to sensors, where the
rest of the comparator bindings are placed.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Use the common io-channel-cells name "input" instead of "channel" to make
this binding work with the various ADC DT macros.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Use the common io-channel-cells name "input" instead of "positive" and
"negative" to make this binding work with the various ADC DT macros.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add a property for STM32 ADC to indicate which type of sequencer is used
by the device (fully configurable or not).
Add defines to help with this setting.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Remove temp-, vref- and vbat-channel from STM32 ADC nodes as it is not
used in the driver anymore.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Add phandle prop to reference any regulator that must
be enabled in order for the LPADC to function as intended.
Change LPADC driver to use this property if present.
LPADC on LPC55S36 depends on VREF peripheral, enable for this platform.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Remove `threshold-reg-offset` DT property and implement them with static
inline functions in `reg_def.h`
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Add multi-device support in npcx adc driver since there is more than one
adc module in npcx4 series. And each adc's reference voltage might be
different, this CL introduces the `vref-mv` prop. to select its own
reference voltage.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Signed-off-by: Kate Yen <htyen@nuvoton.com>
Add two properties to define the STM32 ADC clock source:
- Clock source: synchronous or asynchronous
- Clock prescaler
By combining these two parameters, it will be possible to set the desired
ADC clock for most series.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
This adds support for the max1125x (max11254, max11254)
family of spi adc devices.
Signed-off-by: Mustafa Abdullah Kus <mustafa.kus@sparsetechnology.com>
