Add Clock Control driver support for Renesas RZ/G3S
Signed-off-by: Tien Nguyen <tien.nguyen.zg@renesas.com>
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
In the current implementation, when `gpio_ra_pin_interrupt_configure`
is executed, the existing settings made by `gpio_ra_pin_configure`
are erased.
A read-modify-write method will be used to preserve the settings.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Building with clang warns:
drivers/sensor/st/ism330dhcx/ism330dhcx.c:107:19: error: unused function
'ism330dhcx_reboot' [-Werror,-Wunused-function]
static inline int ism330dhcx_reboot(const struct device *dev)
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Building with clang warns:
drivers/dma/dma_emul.c:73:20: error: unused function
'dma_emul_xfer_is_error_status' [-Werror,-Wunused-function]
static inline bool dma_emul_xfer_is_error_status(int status)
^
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
When using the interrupt UART API, it is expected that the driver will
call the callback function repeatedly while TX interrupt is enabled.
However that is not necessarily the case with the FIFO is enabled.
If the application calls uart_fifo_fill() each time with only one byte
of data, the TX interrupt will never trigger. This is because the 1/8 TX
interrupt trigger threshold is never reached. For this reason, the
callback function should be called multiple times from software as
needed.
Fixeszephyrproject-rtos/zephyr#85479
Signed-off-by: Xudong Zheng <7pkvm5aw@slicealias.com>
Update and enable Wi-Fi/Bluetooth software coexistence management.
This improves package handling and is recommended to be used
in high traffic scenarios.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Fix compilation issues for SoftAP mode which were missed in the mode
specific code changes.
Signed-off-by: Sachin D Kulkarni <Sachin.Kulkarni@nordicsemi.no>
Make use of pm_device_driver_init to perform driver initialization.
Implement PM suspend and resume, which performs the following actions:
* Enables/disables the USART
* Gates the USART clock
* Configures USART pins
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Reuse the same peripheral init function between init and the
runtime configure API. Remove redundant enable calls, the init
function enables the USART internally.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
This commit adds HWINFO driver for MAX32 MCUs.
"z_impl_hwinfo_get_device_id" function is necessary for Zephyr USB
device stack.
Signed-off-by: Furkan Akkiz <hasanfurkan.akkiz@analog.com>
Implementation of chan_filter and chan_release allows to maintain
synchronization about DMA channel allocation between hal DMA driver and
zephyr DMA driver.
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
The driver already read the speed flags (cfr. ospeed) and called
LL_GPIO_SetPinSpeed, but these flags could not be set yet.
Signed-off-by: Jaro Van Landschoot <jaro.vanlandschoot@basalte.be>
The BLE acronym is not an official description of Bluetooth
LE, and the Bluetooth SIG only ever refers to it as Bluetooth
Low Energy or Bluetooth LE, so Zephyr should as well.
This commit does not change any board or vendor specific
documentation, and the term BLE may still be used in those.
It will be up to the vendors to update it if they want,
since many of them are using the term BLE in their
products.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Decouple dependency of CONFIG_NXP_WIFI_SOFTAP_SUPPORT.
Add wifi defconfig to set default kconfig options when soft AP
enabled.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Add support for wifi overrun count, beacon received and beacon missed
count.
Add support for wifi statistics clear.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
The Max flash size of the stm32H5 serie depends on the mcu device
from 256 to 1024 KB, in two banks.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Rename *write_protection functions to *cr_lock, because it is not
enabling real write protection. It only blocks changing register
by software accidentally.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Building with clang warns:
drivers/sensor/st/lis2dw12/lis2dw12.c:194:23: error: unused
function 'sensor_ms2_to_mg' [-Werror,-Wunused-function]
static inline int32_t sensor_ms2_to_mg(const struct sensor_value *ms2)
^
Move the function to include/zephyr/drivers/sensor.h with the other
sensor_ms2_to* functions.
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Adds cyclic support, where a multi-block transfer is automatically
reloaded to the first block after the multi-block transfer completes.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Block_ts stores the number of transfers from DMA source, not the
transferred length in bytes.
Regression from 9c4cd3057d.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Building with clang warns:
drivers/sensor/st/iis2iclx/iis2iclx.c:68:19: error: unused function
'iis2iclx_reboot' [-Werror,-Wunused-function]
static inline int iis2iclx_reboot(const struct device *dev)
^
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Building with clang warns:
drivers/sensor/st/lsm9ds0_mfd/lsm9ds0_mfd.c:42:19: error: unused
function 'lsm9ds0_mfd_accel_set_odr_raw' [-Werror,-Wunused-function]
static inline int lsm9ds0_mfd_accel_set_odr_raw(const struct device *dev,
^
lsm9ds0_mfd_accel_set_odr_raw is only used by code that was guarded by
defined(CONFIG_LSM9DS0_MFD_ACCEL_SAMPLING_RATE_RUNTIME) in addition to
!defined(LSM9DS0_MFD_ACCEL_DISABLED).
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Building with clang warns:
drivers/sensor/st/lsm6dso/lsm6dso.c:89:19: error: unused function
'lsm6dso_reboot' [-Werror,-Wunused-function]
static inline int lsm6dso_reboot(const struct device *dev)
^
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Building with clang warns:
drivers/sensor/st/lsm6dso16is/lsm6dso16is.c:83:19: error: unused
function 'lsm6dso16is_reboot' [-Werror,-Wunused-function]
static inline int lsm6dso16is_reboot(const struct device *dev)
^
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
Building with clang warns:
drivers/flash/spi_nor.c:306:20: error: unused function
'delay_until_exit_dpd_ok' [-Werror,-Wunused-function]
static inline void delay_until_exit_dpd_ok(const struct device *const dev)
^
delay_until_exit_dpd_ok is only used when ANY_INST_HAS_DPD is defined.
Signed-off-by: Tom Hughes <tomhughes@chromium.org>
This driver allow to use Zephyr native IP stack or the IP stack provided
by HAL / WiseConnect.
The WiseConnect implementation may take advantage of the specific
features provided by the 917 (power consumption, speed,
validation...).
Some notable features are not available with this interface:
- It seems Zephyr does not provide API to offload multicast membership
management. User should be to directly call WiseConnect APIs
- Support for ICMP frames is difficult. Note that WiseConnect
automatically answer to ping request. It is just not possible to
send ping requests and receive ping responses.
- Zephyr and WiseConnect both support TLS offloading. However this
patch does not implement it.
- Reentrancy in the WiseConnect side is uncertain.
This implementation has been tested with samples/net/wifi/ (which relies
on subsys/net/lib/shell).
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Driver was tested with a custom application which enabled the BT_SHELL.
Basic functionalities were verified:
- Scanning
- Advertising
- Connecting
Configuration needed for the test:
- CONFIG_BT=y
- CONFIG_BT_PERIPHERAL=y
- CONFIG_BT_CENTRAL=y
- CONFIG_BT_SHELL=y
- CONFIG_SHELL=y
Co-authored-by: Tibor Laczko <tibor.laczko@silabs.com>
Signed-off-by: Tibor Laczko <tibor.laczko@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Implement DMA driver for siwx917 using UDMA peripheral. For now,
Scatter/Gather DMA is not yet supported.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
