The BLE acronym is not an official description of Bluetooth
LE, and the Bluetooth SIG only ever refers to it as Bluetooth
Low Energy or Bluetooth LE, so Zephyr should as well.
This commit does not change any board or vendor specific
documentation, and the term BLE may still be used in those.
It will be up to the vendors to update it if they want,
since many of them are using the term BLE in their
products.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The Discord channel name for LE Audio has been renamed to bt-audio
The Discord channel name for bluetooth-sig has been renamed to bt-sig
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Commit adds description of key representation incompatibility
for mesh images built with different crypto libraries.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Added initial CCP client implementation that simply
does discovery of TBS on a remote CCP server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The CCP API for the Call Control Profile works on top of the
TBS API, and will eventually replace parts of the TBS API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
add test for reconfigure, release, suspend, abort and disconnect.
app_config_req and app_reconfig_req always accept the req,
so don't need to handle reject case.
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
Specifies that the `CONFIG_BT_MESH_SHELL_DFU_METADATA` must be enabled
to use the `dfu metadata` commands in the mesh shell.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Adds documentation for the mesh shell blob flash stream feature. This
feature allows the user to specify the flash area to write the BLOB to.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Renames the blob cli bounds command to blob cli caps in documentation,
matching the implementation in shell.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Update the instructions for the three possible Bluetooth setups
(controller-only, combined build, host-only) to be in line with how the
features are actually enabled (e.g. device tree for the controller and HCI
drivers).
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
bt_le_set_auto_conn() function is not working as
expected. Also, it doesn't have any test coverage
and any usage in sample applications.
The function is deprecated
Fixes#81597
Signed-off-by: Ivan Iushkov <ivan.iushkov@nordicsemi.no>
Remove the deprecated HCI driver API which was provided by the hci_driver.h
header file. The deprecation happened in Zephyr 3.7, so the API can now be
removed for Zephyr 4.1.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
The API directory really isn't the best place for shell
documentation, which isn't API.
Created a new directory for Bluetooth shell documentation
and moved the ISO and LE Audio docs in there.
The existing bluetooth-shell.rst file was also split into
several new files, so that it follows the same structure.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Aligns subnet bridge related commands according to conventions used for
rest of the shell commands. Also updates documentations to reflect the
change.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Adds support for using relay buffers and advertising set for the subnet
bridge feature, even if the relay feature is disabled.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Refactored the structure of the troubleshooting section so it
is more similar to how e.g. the ArchWiki lists troubleshooting
entries, which makes it easier to search for and separate
each entry.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The exisitng documentation was out of date and
possibly not working.
Added a section on how to use NAT and port forwarding.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The documentation guidelines have a specified order of
header underlines that this file did not follow.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add create_sink_by_name command that scans for broadcast sources
with BT_DATA_BROADCAST_NAME matching the name given to the shell
command.
Fixes#70837
Signed-off-by: Babak Arisian <bbaa@demant.com>
Adding a brief fly-in of the main concepts of the
implementation of link layer control procedures handling
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
This commit adds a warning and a Kconfig option to `bt_conn_le_create`
and `bt_conn_le_create_synced` functions which are meant to warn a user
of a potential leakage of an active connection object.
This change is implemented due to frequent incorrect use of the
connection pointer where a pointer to an existing connection object
is overwritten by `bt_conn_le_create` and `bt_conn_le_create_synced`
functions which in turns leads to sporadic critical bugs. See
https://github.com/zephyrproject-rtos/zephyr/pull/78284#discussion_r1754304535
for more details.
The Kconfig option is introduced instead of always returning the error
to not affect current implementations. However, it is recommended to
keep this option enabled to avoid potential bugs.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
The timeout state is local and can block new ATT operations, but does
not affect the remote side. Disconnecting the GATT connection upon ATT
timeout simplifies error handling for developers. This reduces rare
failure conditions to a common one, without needing special cases for
ATT timeouts.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adds the `bt_mesh_brg_cfg` prefix to the public Subnet Bridge API, and
aligns the function and callback naming with the rest of the Bluetooth
Mesh API.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
This commit uses the new .. zephyr:code-sample-category directive to
categorize code samples across the tree.
Updates existing legacy references to manually defined targets to now
use :zephyr:code-sample-category: role instead.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Adds implementation for the Bridge Configuration Server model.
Updates `brg_cfg` module to add sanity check for
bt_mesh_brg_cfg_tbl_remove() API. Also, updates the unit test
accordingly.
Adds documentation for the Bridge Configuration Server model
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Implements the Bridge Configuration Client model.
Adds opcodes for all Bridge messages to `foundation.h`. Adds client-side
support for these messages.
Adds a new Kconfig option for the Bridge Configuration Client model to
configure the waiting time for respones for acked messages.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Any places that checked for GTBS is now always enabled
as GTBS is mandatory to support, and the Kconfig option
was removed.
Also removed a duplicate Kconfig option for TBS,
BT_TBS_SERVICE_COUNT, as it was unused.
The other Kconfig option BT_TBS_BEARER_COUNT is used
instead exclusively to set it if needed.
Since GTBS can now exist alone, it must also
support having its own calls and other values.
This means that the GTBS and TBS instances now share
the same underlying struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fixes bad usage of single backticks in lieu of double backticks for
rendering inline literals, or simple '*' for italics.
When appropriate, a better construct than double backticks has been
selected (ex. :file:, :kconfig:option:, :c:func:, ...), or proper :ref:
have been used if the original intention was to have a link.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Added option to set the ASE count through the bap API, making ASE
configuration runtime available. The upper limit of ASEs are still
bound by the Kconfig options set for ASEs.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The generated HTML was broken, even though the rst files themselves
contained the correct URLs. Update to a different format which should
generate the right output.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
The auto-pts project is now days hosted under an independent organization
instead of the intel one.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Modify the bt_bap_scan_delegator_add_src to take an address and
a sid instead of a PA sync object, so that the scan delegator
can add a source without syncing to the PA.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added Isochronous channels to the controller
Moved Isochronous channels from LE Audio to the host
Changed the LE Audio to refer to the page where
the feature is more detailed described.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
With the new Bluetooth Qualification process the QDID and link to
launchstudio are outdated, remove them.
Also remove the ICS listing as it hasn't been updated for a while.
Instead add a download link to the Zephyr Bluetooth Host ICS file.
Update the documentation configuration script to include the ICS file
(`*.pts`) in the external contents.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Utilize a code spell-checking tool to scan for and correct spelling errors
in various files within the `doc` directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Remake the Zephyr Generic audio framework (GAF) figure to a graphviz
version.
This makes it easier to modify it directly in the .rst file.
This also adds the missing GMAP/GMAS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remake the Generic audio framework (GAF) figure to a graphviz version.
This makes it easier to modify it directly in the .rst file.
This also adds the missing GMAP/GMAS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remake the Bluetooth Audio Architecture figure to a graphviz
version. This makes it easier to modify it directly in the
.rst file.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
