A specific section of the flash on the SiWx917 is reserved for the
Network co-processor (NWP). This zone needs to be delimited in order to
not overwrite it. We then need to use "code-partition" to provide Zephyr
the application code flash location.
Co-authored-by: Martin Hoff <martin.hoff@silabs.com>
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Report DMA configuration in the board definitions.
Note the addresses of the DMA buffers are hardcoded in the HAL. So,
these areas have to be declared in the linker file.
Co-authored-by: Sai Santhosh Malae <santhosh.malae@silabs.com>
Signed-off-by: Sai Santhosh Malae <santhosh.malae@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
These shouldn't be in the board _defconfig since they cannot be overridden
then. Move them to Kconfig.defconfig instead.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Add overlays for xg24_dk2601b and xg27_dk2602a for the accuracy test.
Update the api test to use named macros for readability.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
The xg24_dk2601b, xg24_ek2703a, xg27_dk2602a, xg23_rb4210a,
xg24_rb4187c and xg29_rb4412a board yaml files were updated
to support the comparator driver. Documentation hardware
support was updated for each of these boards as well to
mention support for the ACMP hardware block and comparator
driver.
Signed-off-by: Christian Galante <christian.galante@silabs.com>
Added support for vin supply which seems to be needed for the radio
boards in order to power on the sensor.
Signed-off-by: Yishai Jaffe <yishai1999@gmail.com>
This commit removes all references to the `xtools` toolchain variant in the
board YAML files.
Note that the `xtools` toolchain variant has been deprecated since Zephyr
v3.3.0 and now removed.
The removal process was automated using the following command line:
git grep -l xtools -- boards/*.{yml,yaml} | \
xargs -n 1 -P $(nproc) \
yq -i 'del(.toolchain[] | select(. == "xtools"))'
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add hwinfo driver for Silicon Labs Series 2 devices. The driver
is separate from the Series 0/1 Gecko driver because the available
reset causes are completely different.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Since commit bda8ae8c3f ("drivers: clock_control: silabs: Add clock
control driver"), clock configuration is defined in Device Tree.
We can drop now unused configurations existing in board definitions.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
J-Link firmware images for silabs boards are not distributed by
SEGGER, fw update should be done with Simplicity Studio instead.
Signed-off-by: Daniel Fuchs <software@sagacioussuricata.com>
Based on board files for DK2601B. The EFR32xG24 Explorer Kit
(xG24-EK2703A) is similar to the DK2601B but does not have any
sensors onboard.
Signed-off-by: Daniel Fuchs <software@sagacioussuricata.com>
Removed FLASH_BASE_ADDRESS configuration from various boards' Kconfig.
The only thing needed in order to do this was to update the relevant dtsi
files so that the flash0 node has its reg property configured properly.
Signed-off-by: Yishai Jaffe <yishai1999@gmail.com>
Update sltb010a,slwrb4180a, xg24_dk2601b and xg27_dk2602a boards
descriptions in order to run dma test. Also update boards
documentations.
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
This option gets the default value "y" whenever HAS_BT_CTLR is enabled, and
since the EFR32 HCI driver now selects HAS_BT_CTLR the right thing happens
either way.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Add uart-pipe driver default option in device trees for silabs boards.
It enables vcom for the boards, handy to have for sample application, for
example tester app.
Signed-off-by: Evgenii Kosenko <Evgenii.Kosenko@silabs.com>
The GECKO_PIN() macro does not do anything except pass the
argument through unaltered. It only serves to make DeviceTree
files more verbose. It was inconsistently used, make the .dts
files consistent by never using it.
The DBUS pinctrl driver doesn't use the port or location macros
from the gpio_gecko.h header. The pin number macro is the only
other thing defined in this header. Stop including the header on
Series 2 based boards.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Swap from silabs,gecko-pinctrl to silabs,dbus-pinctrl for all boards
with Series 2 SoCs. Explicitly declare pin properties as part of
pinctrl pinout configuration.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
In preparation of adding a check for dead references, this commit fixes
currently broken zehpyr_file: links.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This updates the documentation of all the Silicon Labs boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The DT node "stimer0" represented two different hardware timers,
RTCC and SYSRTC. Use the correct peripheral names for the nodes.
Add interrupt names and missing interrupt numbers.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Introduce bindings for Series 2 oscillators: HFRCODPLL, HFRCOEM23,
LFRCO and LFXO.
Add clock tree representation in devicetree `clocks` node.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Switch EFR32MG21 to use the device init HAL. This makes the init sequence
the same as the rest of Series 2.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
