Enable spi_flash sample for MAX32655FTHR and MAX32655EVKIT
which have an external Winbond W25Q128jv external flash.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
Signed-off-by: Rob Cornall <Rob.Cornall@analog.com>
Signed-off-by: Yasin Ustuner <Yasin.Ustuner@analog.com>
This commit enable erase command for max32xxx/max78xxx boards.
Erase command shall be passed to west flash as below
west flash --erase
Console output will like:
......
[max32xxx.cpu] halted due to breakpoint, current mode: Thread
xPSR: 0x01000000 pc: 0x000001b4 msp: 0x20004000
max32xxx mass erase complete
wrote XXXX bytes from file YYYY
Enable debug to connect in low-power mode
shutdown command invoked
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Add a common openocd configuration files for MAX32 MCUs
to simplify maintanence of them.
After this update it will be easy to add/remove new command
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Updated the reference to the ADI Developer Portal Solution Center with
URL. The Solution Center provides more resources than the product
information. Users can still find the product information from the new
portal link.
Signed-off-by: Janel Kratky <janel.kratky@analog.com>
Updated the reference to the ADI Developer Portal Solution Center with
URL. The Solution Center provides more resources than the product
information. Users can still find the product information from the new
portal link.
Signed-off-by: Janel Kratky <janel.kratky@analog.com>
Updated the reference to the ADI Developer Portal Solution Center with
URL. The Solution Center provides more resources than the product
information. Users can still find the product information from the new
portal link.
Signed-off-by: Janel Kratky <janel.kratky@analog.com>
To prevent duplication of include lines across tests, move DMA binding
include into max32655.dtsi.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
This commit removes all references to the `xtools` toolchain variant in the
board YAML files.
Note that the `xtools` toolchain variant has been deprecated since Zephyr
v3.3.0 and now removed.
The removal process was automated using the following command line:
git grep -l xtools -- boards/*.{yml,yaml} | \
xargs -n 1 -P $(nproc) \
yq -i 'del(.toolchain[] | select(. == "xtools"))'
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Segger started to support MAX78002 with JLink version V8.12. So,
MAX78002EVKIT board has JLink support.
Signed-off-by: Furkan Akkiz <hasanfurkan.akkiz@analog.com>
Use a string for the mipi-mode property over an integer value, as this
significantly improves the readability of the MIPI DBI device binding.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Use configdefault when enabling LV_COLOR_SWAP_16 within boards and
shield definitions, to avoid OR'ing the dependencies for the Kconfig
symbol. Otherwise, a user manually selecting LV_COLOR_DEPTH will
encounter build errors as LV_COLOR_SWAP_16 may be enabled when
LV_COLOR_DEPTH_16 is not selected
Fixes#81546
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add MAX78002EVKIT board.
For more information about this board please check
https://www.analog.com/
Signed-off-by: Furkan Akkiz <hasanfurkan.akkiz@analog.com>
This updates the documentation of all the Analog Devices boards to use
the new `zephyr:board::` directive.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Configures pins for the SPI instance attached to the Arduino connector
to enable using this board with the eval_adxl372_ardz shield.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Configures pins for the GPIOs attached to the Arduino connector to
enable using this board with the eval_adxl372_ardz shield.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Full name was set based on the information available either in board
documentation or in Twister files.
Whenever applicable, vendor name was dropped from the full name so that
all boards have a consistent naming scheme.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Front picture was listed twice, despite the back picture
(max32666fthr_img2.jpg) actually being checked into the repo, so switch
to that one.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
MAX32662EVKIT board has CFAF128128B1-0145T display which
is 128x128 graphic display.
This commit enable mpi dbi display support with LVGL graphic library.
Pin connection of display is 3wire mode
SRAM size increased to be fit with lvgl example.
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Adds missing code-sample directive to the Hello World sample in
preparation for upcoming changes to the Zephyr documentation that will
be leveraging the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
`CLOCK_CONTROL` subsystem being selected directly at family level,
remove it from individual board configurations.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Adds a new board definition for the ADI MAX32690FTHR board. This board
uses the same SoC as the MAX32690EVKIT board, but with a smaller feather
form factor.
Tested on hardware with the following samples:
- samples/hello_world
- samples/basic/blinky
- samples/basic/threads
- samples/subsys/shell/shell_module
- samples/subsys/input/input_dump
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
