Change license owner to Prevas due to initially wrong owner due to company
mix-up during co-development.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
This driver supports the magnetometer in the ST lsm9ds1 sensor, on the
I2C bus.
This driver does not support the triggers.
This driver use the stmemsc HAL.
link: https://www.st.com/resource/en/datasheet/lsm9ds1.pdf
Signed-off-by: Miguel Gazquez <miguel.gazquez@bootlin.com>
This patch adds a missing include directive to `spi.dtsi` in the
`build_all` configuration.The include is required because commit
2ac316465f introduced the use of `GPIO_ACTIVE_HIGH` and `GPIO_ACTIVE_LOW`
macros.
Signed-off-by: Patryk Koscik <pkoscik@antmicro.com>
some current sense amplifiers have a non zero offset voltage
that correlates to zero current. adding this offset voltage binding
allows the driver to be used with this type of circuitry.
Signed-off-by: Brandon Allen <brandon.allen@exacttechnology.com>
This commit adds a driver for the BH1790 Heart Rate Monitor IC.
Based on the approach used by the MAX30101 driver, an existing optical
heart rate sensor with a sample in Zephyr.
Signed-off-by: Magpie Embedded <magpieembedded@gmail.com>
Add wsen_itds_2533020201601 driver with
the corrected name and compatibility with
the hal update as well as added new features.
Signed-off-by: Wajdi ELMuhtadi <wajdi.elmuhtadi@we-online.com>
Add driver capability to properly set high performance mode
while setting data rate (thru lis2duxxx_mode_set() API)
based on how power-mode is set into DTS: if it is set to
LIS2DUX12_OPER_MODE_HIGH_PERFORMANCE then configure HP mode,
LP/ULP mode otherwise.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The tmp116 sensor driver also supports tmp117 and tmp119. Therefore rename
to indicate that is supports a range of tmp devices.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
The ti,opt3001 ambient light sensor is capable of asserting its interrupt
gpio upon conversion completion. The interrupt gpio can then be used to
trigger a reading of the conversion result automatically.
Due to this, it makes sense for the driver to implement the sensor trigger
functionality.
Add a devicetree property, int-gpios, to the ti,opt3001 bindings to allow
describing the gpio used for getting interrupts from the ti,opt3001.
Implement the sensor trigger functionality with options for using the
global worker thread or letting the ti,opt3001 create its own thread for
servicing the interrupts.
In both cases, when an interrupt is received the driver will read a new
measurement from the chip and clear the interrupt. The sample is then ready
to be read by the user of the sensor.
When manually triggering a sample_fetch, the trigger handler is not
invoked.
Signed-off-by: Emil Dahl Juhl <emdj@bang-olufsen.dk>
The address of the last i2c device in the build all test has a wrong
address. This fixes that typo.
Signed-off-by: Paul Timke Contreras <ptimkec@live.com>
The vendor prefix has been changed from 'ltr' to 'liteon'.
This change is made to better reflect the actual name of
the vendor, which is LiteOn. The previous prefix 'ltr'
was referring to the LiteOn Optical Sensor family, which
could lead to misunderstandings.
Signed-off-by: Konrad Sikora <kontakt@konradsikora.pl>
Use drivers.sensor for all tests related to sensors.
Also change MAINTAINER file to reflect that. It was using
drivers.sensors
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The LSM6DSV32X part is nearly identical to the LSM6DSV16X but has different
sensitivity scales for the accelerometer (4-32G versus 2-16G). This commit
adds support for this part via the "st,lsm6dsv32x" compatible string.
Signed-off-by: Corey Wharton <xodus7@cwharton.com>
Add support for setting the sample frequency via `attr_set` and the
output data rate from device tree source.
Signed-off-by: Fredrik Gihl <fgihl@hotmail.com>
- add driver for Vishay VEML6031 High Accuracy Ambient Light Sensor.
- add new compatible "vishay,veml6031".
- read and write consecutive 8 bit registers as bulk operation.
- add driver to build all test of sensors.
- support fetch and get.
- triggered mode and interrupt is not yet supported.
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
This Introduces a driver for the i2c interface of Phosense XBR818.
XBR818 is a 10.525Ghz Radar chip with builtin detection algorithm.
Signed-off-by: Camille BAUD <mail@massdriver.space>
Add wsen_pads_2511020213301 driver with
the corrected name and compatibility with
the hal update as well as added new features.
Signed-off-by: Wajdi ELMuhtadi <wajdi.elmuhtadi@we-online.com>
Add wsen_tids_2521020222501 driver with
the corrected name and compatibility with
the hal update as well as added new features.
Signed-off-by: Wajdi ELMuhtadi <wajdi.elmuhtadi@we-online.com>
The TMP435 is a remote temperature sensor monitor
with a built-in local temperature sensor.
Signed-off-by: Jaakko Rautiainen <jaakko.rautiainen@bittium.com>
Add wsen_pdus_25131308XXXXX driver with
the corrected name and compatibility with
the hal update as well as added new features..
Signed-off-by: Wajdi ELMuhtadi <wajdi.elmuhtadi@we-online.com>
Fixes issue introduced in #76460
The previous code attempted to detect whether TMAG5273 or TMAG3001 was
connected based on DEVICE ID register. This doesn't work as the bits that
denote the version on one part are undefined on the other part, and cannot
be relied on to be zero.
This commit adds a TMAG3001 compatible which (for now) is just derived from
the TMAG5273 compatible. This allows TMAG3001 to be specified directly in
the DT. The driver code is updated to support both compatibles.
Signed-off-by: Yiding Jia <yiding.jia@gmail.com>
The LIS2DUXS12 is a smart, digital, 3-axis linear accelerometer whose
MEMS and ASIC have been expressly designed to combine the lowest current
consumption possible with features such as always-on antialiasing
filtering, a finite state machine (FSM) and machine learning core (MLC)
with adaptive self-configuration (ASC), and an analog hub / Qvar sensing
channel.
(https://www.st.com/en/mems-and-sensors/lis2duxs12.html)
Signed-off-by: Armando Visconti <armando.visconti@st.com>
