The ISO C function time() should not depend on POSIX and this was
corrected recently via the common libc time() implementation.
Remove this dependency from the network subsystem where it has
been unduly needed for some time.
Similarly, XSI_SINGLE_PROCESS was a dependency for time() via
picolibc, because the time() implementation in picolibc relies
on the POSIX gettimeofday() call.
However, since Zephyr's common libc time() implementation no longer
depends on that, it can be removed as a dependency in the network
subsystem as well.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Instead of using 32 bit enum values for event numbers, convert
the code to use 64 bit long bit fields. This means that the
user API is changed to use 64 bit event values instead of 32
bit event values.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add option to use the connection manager to
schedule a (re-) sync on connection and diabeling the
work, when there is no connection.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Use connection manager to deactivate and activate
net log backend.
This removes the warnings about dropped packages
completly.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Doing another init of the log_backend_net in
the net config init could lead to the
server, set during runtime, being overwritten
by the Kconfig default.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
this adds the option to have the clock periodically resynced with
the time from the sntp server, instead of just syncing at startup.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Changed NET_CONFIG_CLOCK_SNTP_INIT depends on to require
POSIX_TIMERS instead of the deprecated POSIX_CLOCK
Signed-off-by: Luca Arato <luca.arato@secomind.com>
In case IPv4 conflict detection is enabled, monitor network events to
determine whether IPv4 address is ready to use or not, so that the
library returns only after the network setup is fully complete.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Remove IPSP support from the tree.
It has no maintainers, and is regularly broken. The fact that it's
nontrivial to set-up in linux makes it hard to fix reported issues.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Convert various networking subsystem files to use ARRAY_FOR_EACH
macro to make the looping more robust.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The netmask should be tied to the IPv4 address instead of being
global for the network interface.
If there is only one IPv4 address specified to the network interface,
nothing changes from user point of view. But if there are more than
one IPv4 address / network interface, the netmask must be specified
to each address separately.
This means that net_if_ipv4_get_netmask() and net_if_ipv4_set_netmask()
functions should not be used as they only work reliably if there is
only one IPv4 address in the network interface.
The new net_if_ipv4_get_netmask_by_addr() and
net_if_ipv4_set_netmask_by_addr() functions should be used as they make
sure that the netmask is tied to correct IPv4 address in the network
interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Net MGMT mask should be fully configured first, prior to be used to
initialize and add the callback.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Allow the use of the NTP server address, set by
dhcpv4 option, by the net_init_clock_via_sntp function.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
The "encryption only" security level was deprecated in IEEE
802.15.4-2015. This deprecation has already been introduced in the code
but was overlooked in net config.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Add DHCPv6 support to the net config library. In case DHCPv6 is enabled,
net config will attempt to acquire IPv6 address and/or prefix when used.
The user can select with Kconfig whether to request address or prefix
(or both).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a network configuration option to configure whether IEEE 802.15.4
packets are expected to be ACKed or not.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
In the IEEE 802.15.4 area certain settings must be set before
net_if_up() may be called (e.g. the channel).
Also net_if_up() may not be called if
CONFIG_IEEE802154_NET_IF_NO_AUTO_START=y.
This fixes the set-up order and handling of
CONFIG_IEEE802154_NET_IF_NO_AUTO_START.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Add a new Kconfig parameter NET_CONFIG_MY_VLAN_ID as initial network
configuration to enable users to set VLAN identifier at startup.
Add a new setup_vlan(...) function to setup the VLAN identifier in
the device, the call have an effect only when NET_CONFIG_MY_VLAN_ID
is above zero.
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Add new network interface flag, which allows to disable Neighbour
Discovery protocol from being used on the interface. This allows to
interfaces that do not support ND (like OpenThread) to coexist with
other IPv6 interfaces.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The init infrastructure, found in `init.h`, is currently used by:
- `SYS_INIT`: to call functions before `main`
- `DEVICE_*`: to initialize devices
They are all sorted according to an initialization level + a priority.
`SYS_INIT` calls are really orthogonal to devices, however, the required
function signature requires a `const struct device *dev` as a first
argument. The only reason for that is because the same init machinery is
used by devices, so we have something like:
```c
struct init_entry {
int (*init)(const struct device *dev);
/* only set by DEVICE_*, otherwise NULL */
const struct device *dev;
}
```
As a result, we end up with such weird/ugly pattern:
```c
static int my_init(const struct device *dev)
{
/* always NULL! add ARG_UNUSED to avoid compiler warning */
ARG_UNUSED(dev);
...
}
```
This is really a result of poor internals isolation. This patch proposes
a to make init entries more flexible so that they can accept sytem
initialization calls like this:
```c
static int my_init(void)
{
...
}
```
This is achieved using a union:
```c
union init_function {
/* for SYS_INIT, used when init_entry.dev == NULL */
int (*sys)(void);
/* for DEVICE*, used when init_entry.dev != NULL */
int (*dev)(const struct device *dev);
};
struct init_entry {
/* stores init function (either for SYS_INIT or DEVICE*)
union init_function init_fn;
/* stores device pointer for DEVICE*, NULL for SYS_INIT. Allows
* to know which union entry to call.
*/
const struct device *dev;
}
```
This solution **does not increase ROM usage**, and allows to offer clean
public APIs for both SYS_INIT and DEVICE*. Note that however, init
machinery keeps a coupling with devices.
**NOTE**: This is a breaking change! All `SYS_INIT` functions will need
to be converted to the new signature. See the script offered in the
following commit.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
init: convert SYS_INIT functions to the new signature
Conversion scripted using scripts/utils/migrate_sys_init.py.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
manifest: update projects for SYS_INIT changes
Update modules with updated SYS_INIT calls:
- hal_ti
- lvgl
- sof
- TraceRecorderSource
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: devicetree: devices: adjust test
Adjust test according to the recently introduced SYS_INIT
infrastructure.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
tests: kernel: threads: adjust SYS_INIT call
Adjust to the new signature: int (*init_fn)(void);
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Currently, if timeout is not configured for the network initialization in
the config module, the initialization function will configure IPv4/IPv6/
DHCPv4 regardless of the interface status. This is not the case when the
timeout is set, and the interface was not brought up during the timeout
period. This lead to ambiguity in terms of interface initialization.
This commits unifies the behaviour between these two cases. The
aforementioned initializations will always take place, regardless of the
interface status. The IPv4/IPv6 and DHCPv4 routines should be prepared
to deal with interfaces that are not brought up. The only difference
now, between timeout and no timeout scenario, is that the former will
report an error in case the timeout occurs wile waiting for the expected
events.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Many device pointers are initialized at compile and never changed. This
means that the device pointer can be constified (immutable).
Automated using:
```
perl -i -pe 's/const struct device \*(?!const)(.*)= DEVICE/const struct
device *const $1= DEVICE/g' **/*.c
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove NET_CONFIG_IEEE802154_DEV_NAME in favor of DT based choice using
zephyr,ieee802154.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use DT choice zephyr,ieee802154 as CONFIG_NET_CONFIG_IEEE802154_DEV_NAME
is being phased out.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This change decouples the IEEE 802.15.4 (L2) layer from all IPv6 (L3)
concerns.
Applications may now choose to set CONFIG_NET_6LO=n and
CONFIG_NET_L2_IEEE802154=y at the same time.
Setting CONFIG_NET_6LO=n will build a vanilla IEEE 802.15.4-2006 specs
compliant L2 layer without any reference to 6LoWPAN or IPv6. This allows
application developers to design custom non-IP protocols on top of
IEEE 802.15.4-2006 and thereby makes the L2 layer much more re-usable.
Fixes#48585.
Signed-off-by: Florian Grandel <jerico.dev@gmail.com>
Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Loop by LOOP_DIVIDER counts instead of the number of seconds
specified in the timeout.
Fixes#39672
Signed-off-by: Paul Gautreaux <paulgautreaux@fb.com>
If the first network interface is down when the net config init
is run, then the IP addresses etc would be set to wrong network
interface. So when initializing the network, try to first find
a network interface that is auto started and use that to configure
IP addresses etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
check_interface resets the counter semaphore, but
net_config_init_by_iface first calls check_interface, then inits
the semaphore.
Initialize the semaphore up front to allow the k_sem_reset call
to work properly.
Signed-off-by: James Harris <james.harris@intel.com>
Currently there is no way to distinguish between a caller
explicitly asking for a semaphore with a limit that
happens to be `UINT_MAX` and a semaphore that just
has a limit "as large as possible".
Add `K_SEM_MAX_LIMIT`, currently defined to `UINT_MAX`, and akin
to `K_FOREVER` versus just passing some very large wait time.
In addition, the `k_sem_*` APIs were type-confused, where
the internal data structure was `uint32_t`, but the APIs took
and returned `unsigned int`. This changes the underlying data
structure to also use `unsigned int`, as changing the APIs
would be a (potentially) breaking change.
These changes are backwards-compatible, but it is strongly suggested
to take a quick scan for `k_sem_init` and `K_SEM_DEFINE` calls with
`UINT_MAX` (or `UINT32_MAX`) and replace them with `K_SEM_MAX_LIMIT`
where appropriate.
Signed-off-by: James Harris <james.harris@intel.com>
Only start the network logging backend if the autostarting
option CONFIG_LOG_BACKEND_NET_AUTOSTART is enabled.
Also, call init to make sure that the backend is initialized
properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Currently, there is a case for net_config_init function that for
timeout==0 and when iface is already up, the ip setup is not proceed
and the error message "Timeout while waiting network..." is logged.
This commit fixes it.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
The timeout log error message condition in wrong. When the timout
happens the "count == -1" and the condition is invalid.
This commit fixes it.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Following are the changes to variable names that are matching
with tag names (Rule 5.7 violations)
In kernel.h, event_type is matching with a tag name in
lib/os/onoff.c. Added a _ prefix to event_type and
also to the macro argument names.
In userspace.c, *dyn_obj is matching with the tag name
dyn_obj in the file itslef. Changed it to dyn
In device.h, device_mmio.h, init.h and init.c,
changed the *device to dev. Except for one change in
init.h
Signed-off-by: Spoorthy Priya Yerabolu <spoorthy.priya.yerabolu@intel.com>
Given the comment in `ipv6_event_handler`, the init function shall wait
for the last added IPv6 address to be confirmed with DAD. This is
contrary with current logic, which will only wait for the first address
to be confirmed.
This commit adds a break statement in the loop, not to overwrite the
recent address to verify with an older one.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This commit allows let build zperf sample with overlay-netusb.conf.
USB subsystem must be enabled by the application.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Instead of just showing network interface pointer, print also
network interface index. This helps debugging.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
CONFIG_NET_CONFIG_INIT_TIMEOUT should not only be available if
CONFIG_NET_CONFIG_AUTO_INIT=y. If *_AUTO_INIT=n then application
may wish to initialize net manually and still use configured
timeout.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
