The "BT RX pri" and "BT RX" are too easily confused with host-side threads,
e.g. the host RX thread is called "BT RX WQ". Add "CTLR" to the Controller
side thread names to make it clear that they're managed by the controller.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
This non-standard feature never had any proper host side implementation
(e.g. it was never upstreamed to BlueZ), and since it comes with notable
maintenance overhead it's fair to just remove it.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Update all HCI drivers to use the new H:4 encoding for buffers passing
to/from drivers.
One behavioral change that's done in favor of simplicity, is that where
there's previously been switch statements that could return an error for
unsupported packet types now simply pass any received packet unchanged to
lower layers of the controller (or the HCI transport). Handling this is
now the responsibility of the lower layers, however in practice hitting
such scenarios means that there's a mismatch between configured host and
controller features.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Updated implementation to use single receive thread to
enqueue HCI ISO data, ACL data and events towards Host when
building HCI-Only samples/applications, i.e. when building
hci_uart, hci_spi or hci_ipc samples (CONFIG_BT_HCI_RAW=y).
This implementation will serialize HCI events and data as
they occur corresponding to on-air timelines of their
occurrences which is how they are generated by the Link
Layer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix CIS event_count_prepare use missed as part of fixes
related to commit be91cfedfb ("Bluetooth: Controller: Fix
incorrect event_count when CIG overlaps").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
For a CIG with a CIG Sync Delay larger than a SDU interval, we cannot
be sure that we can target the very next ISO event when the CIG event
is ongoing; Only reduce event_offset if CIG Sync Delay is smaller
than an SDU interval
Signed-off-by: Troels Nilsson <trnn@demant.com>
Remove a kconfig dependency on BOARD_NATIVE_POSIX which
does not really exist anymore.
Replace a comment mention of native_posix with native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix HCI command buffer allocation failure, that can cause
loss of Host Number of Completed Packets command.
Fail by rejecting the HCI Host Buffer Size command if the
required number of HCI command buffers are not allocated in
the Controller implementation.
When Controller to Host data flow control is supported in
the Controller only build, ensure that BT_BUF_CMD_TX_COUNT
is greater than or equal to (BT_BUF_RX_COUNT + Ncmd),
where Ncmd is supported maximum Num_HCI_Command_Packets in
the Controller implementation.
Relates to commit 81614307e9 ("Bluetooth: Add workaround
for no command buffer available")'.
Relates to commit 297f4f481f ("Bluetooth: Split HCI
command & event buffers to two pools").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing sync_delay and transport_latency information in HCI
LE BIG Complete event.
Relates to commit 1a640e4711 ("Bluetooth: controller:
Included transport latency in LE_Big_Established").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove the HCI command & event emulation layer for ECDH commands and
events. This means that we always do the necessary operations in the host.
The existing BT_ECC Kconfig option stays, but now gets automatically
enabled when necessary (e.g. based on the BT_SMP option), which is why this
commit removes so many explicit assignments in prj.conf files.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Calling `net_buf_reserve` removed any previous reservation, which
includes the reservation by hci_ipc to hold the H4 type byte. This
resulted in a out-of-bounds net_buf_push in hci_ipc.
This commit also enables asserts in hci_ipc in the audio bsim test,
which reveal the out-of-bounds write.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
This commit sets PSA Crypto API as the default library to perform
ECC-DH in HCI, replacing TinyCrypt (which is being deprecated).
Therefore the symbol BT_TINYCRYPT_ECC is renamed as BT_SEND_ECC_EMULATION.
References in samples/tests are also fixed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Remove the deprecated HCI driver API which was provided by the hci_driver.h
header file. The deprecation happened in Zephyr 3.7, so the API can now be
removed for Zephyr 4.1.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Utilize a code spell-checking tool to scan for and correct spelling errors
in all files within the subsys/bluetooth/controller directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Use PDU_BIS_LLID_FRAMED in empty PDUs for framed BIS
Allocate room for header when calculating max_pdu for framed BIS
Set group_sync_delay, stream_sync_delay and framed properly for BIS
broadcaster
Add missing call to isoal_tx_event_prepare() for BIS
Signed-off-by: Troels Nilsson <trnn@demant.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix BT_CTLR_ISOAL_PSN_IGNORE implementation when adjusting
Sequence Number during overlap with current CIG event.
Reuse the implementation from non-PSN ignore implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Troels Nilsson <trnn@demant.com>
Update the native controller to the new HCI driver API. The devicetree
node is placed under existing `radio` nodes, which seemed like the most
intuitive option.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
A Host shall consider any error code that it does not
explicitly understand equivalent to the error code
Unspecified Error (0x1F).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Introduce BT_CTLR_CRYPTO_SUPPORT so that preliminary port to
support nRF54L15 SoC can be upstreamed without encryption
support.
ENTROPY_GENERATOR now selected when BT_CTLR_CRYPTO enabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Make `struct arch_esf` compulsory for all architectures by
declaring it in the `arch_interface.h` header.
After this commit, the named struct `z_arch_esf_t` is only used
internally to generate offsets, and is slated to be removed
from the `arch_interface.h` header in the future.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Namespaced the generated headers with `zephyr` to prevent
potential conflict with other headers.
Introduce a temporary Kconfig `LEGACY_GENERATED_INCLUDE_PATH`
that is enabled by default. This allows the developers to
continue the use of the old include paths for the time being
until it is deprecated and eventually removed. The Kconfig will
generate a build-time warning message, similar to the
`CONFIG_TIMER_RANDOM_GENERATOR`.
Updated the includes path of in-tree sources accordingly.
Most of the changes here are scripted, check the PR for more
info.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
For vendor datapaths that do not use a netbuffer to write SDUs
into, the callee of sdu_write currently has to keep track itself
of how much data has been written to the current SDU; This is wasteful
since ISOAL already keeps track of that. Add an sdu_written parameter
to the callback to inform the callee how much has been written to the
current SDU already so the callee can write using the correct offset
Signed-off-by: Troels Nilsson <trnn@demant.com>
This function was used to shortcut HCI for combined host + controller
builds. It doesn't provide much value and adds complexity to the HCI
driver interface, so just remove it. This means vendor-specific HCI
commands is now the only way for the host to access the same
information.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Enabling vendor-specific extensions also implies support for vendor
events, so a separate Kconfig option for that is unnecessary.
One small additional thing this requires is the use of the
__maybe_unused annotation, since there's no-longer a single Kconfig
option that the controller hci.c can use to know that the vendor event
helper symbols are needed.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
The naming of these two options was problematic, since it's both of them
are about vendor extensions, even though one has _EXT in the name and
the other doesn't. Just merge one option into the other. This has a
slight overhead on the controller side of enabling some more vendor
features if BT_HCI_VS is enabled, but that should hopefully be
acceptable.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Derive BT_CTLR_ISO_TX_BUFFER_SIZE from BT_ISO_TX_MTU to have
optimal Controller memory allocations.
BT_CTLR_ISO_TX_BUFFER_SIZE can be set lower than
BT_ISO_TX_MTU in which case upper layer can send fragmented
SDU to the Controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rename struct bt_hci_iso_data_hdr to bt_hci_iso_sdu_hdr, and
struct bt_hci_iso_ts_data_hdr to bt_hci_iso_sdu_ts_hdr.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add missing check for Coded PHY support when creating
extended advertising set.
Added a fallback in Controller for upper layers requesting
Coded PHY while Controller is implemented without Coded PHY.
In this case, 1M PHY will be used in extended advertising
for testing purposes.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Ignore LE 2M PHY being set in Initiating_PHYs of the
LE Extended Create Connection command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix regression in BT_RX_STACK_SIZE use due to
commit b91728619c ("Bluetooth: host: remove
`CONFIG_BT_RECV_BLOCKING`").
Profiling of Controller Rx thread has been mentioned in
commit 586ba9fd13 ("Bluetooth: Controller: Increase
BT_RX_STACK_SIZE for BT_HCI_RAW enabled").
Also, move the TX_STACK_SIZE value as default in Kconfig
from the explicit value being set in hci_ipc sample.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Generic node_rx_hdr struct contains data not used for done event, so this
pdu specific data is moved to node_rx_pdu to minimize memory usage for
MFIFO_done alloc.
This however calls for a considerable write-through replacing the generic
node_rx_hdr with node_rx_pdu when relevant and needed.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
This commit removes `bt_hci_evt_get_flags`, and the associated flag
symbols. These symbols no longer serve a purpose in the driver interface
after the removal of `bt_recv_prio` from the interface.
The implementation of `bt_hci_evt_get_flags` is distributed to its
still-existing use sites, `hci_core` and the `hci_driver` in the
controller.
The duplication of code is intentional. This is no longer part of any
interface, and the host-developers expect the host copy of the function
to change or dissapear entierly. This will allow the host implementation
to progress without fear of breaking the controller implementation.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
This config selects a variant of the HCI driver interface that spills
out host internals unto the drivers and even the Zephyr controller. It
will now be removed in favor of driver interfaces that hide the
internals of the host.
The new default is `CONFIG_BT_RECV_WORKQ_BT`.
Any references to the removed kconfig are refactored out.
Any out-of-tree driver using the removed interface can be easily adapted
by copying the following implementations into the driver as private
functions:
- `hci_driver.h:BT_HCI_EVT_FLAG_RECV_PRIO`
- `hci_driver.h:BT_HCI_EVT_FLAG_RECV`
- `hci_driver.h:bt_hci_evt_get_flags`
- `hci_raw.c:bt_recv_prio`
In combination these symbols function as a interface adapter. These
symbols will be removed in this PR in subsequent commits.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Add HCI input parameter validation according to spec for passing
qualification tests.
- Conditional compile of LE Set PA Receive Enable feature
- Store BIGinfo encryption state and number of streams
- Do not report BIGinfo if phy is invalid or unsupported
- Return disallowed ll_read_iso_tx_sync uses sync recever handle
- Validate BIS indices in ll_big_sync_create
Signed-off-by: Morten Priess <mtpr@oticon.com>
Add checks for vendor specific data path in ULL and HCI driver, to
enable use of vendor data path for BIS reception.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix Extended Advertising Parameter check to exclude legacy
high duty cycle directed advertising from validating the
intervals as advertising interval parameter values are not
applicable for high duty cycle directed advertising.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The BIGinfo PDU bitsets were not accessed in a portable maner for
endianness independence, and need to be handled as bit-manipulations.
Add utility functions to access PDU bitset variables independent of
endianness. Use macros to abstract the offsets and widths.
Conversion of BIG_Handle to LE in HCI layer incorrectly use
sys_cpu_to_le16, which fail because target type is 8-bit.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Invalid values should result in BT_HCI_ERR_INVALID_PARAM
The interval check should only fail with
BT_HCI_ERR_UNSUPP_FEATURE_PARAM_VAL if the requested range
cannot be fulfilled by the controller (ie. there is no overlap
with the supported range)
Fixes EBQ tests HCI/DDI/BI-53-C through HCI/DDI/BI-61-C and
HCI/CCO/BI-64-C
Signed-off-by: Troels Nilsson <trnn@demant.com>
Add support for vendor specific Set Scan Request Reports command and
Scan Request Received Event, available for legacy advertising.
Signed-off-by: Giancarlo Stasi <giancarlo.stasi.co@gmail.com>
Move the nordic and openisa vendor file under ll_sw and add them back to
the list when building for nRF platforms, this was inadvertently removed
in
7bd2804c24 Bluetooth: Controller: Build vendor LLL as library
and is currently causing a:
<wrn> bt_id: No static addresses stored in controller
and random address on nRF devices.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
