The Adafruit Feather ESP32S3 TFT Reverse is a development board in the
Feather standard layout, sharing peripheral placement with other devices
labeled as Feathers or FeatherWings. The board is equipped with an
ESP32-S3 mini module, a fuel gauge, a USB-C and Qwiic/STEMMA-QT connector.
This variant additionally comes with a 240x135 pixel IPS TFT color display
on the backside of the boards and with 3 buttons.
Signed-off-by: Philipp Steiner <philipp.steiner1987@gmail.com>
Enable NXP_WIFI_TX_RX_ZERO_COPY for IW610, which will reduce extra memcpy
between net stack and driver in TX data path and avoid the allocation of
RXPD and mlan_buffer in RX data path, to improve the throughput
performance.
Increase CONFIG_NET_BUF_DATA_SIZE to hold one packet in one buffer.
NXP_WIFI_TX_RX_ZERO_COPY can be enabled not only for NXP_RW610 case.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Add one config file for IW610 chip, as it has different net related
settings and thread priority settings from other hosted MCU, due to
Wi-Fi chip capability difference.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Fix the zperf TCP RX accept error when start both UDP and TCP zperf
server, as the fdtable size is not enough and reserve fd table failed.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Added host AP support for IW416 and IW612 socs.
Adding conf files which can be used along with shield for compilation to
test HostAP and WPA supplicant.
Signed-off-by: Abhinav Kulkarni <abhinav.kulkarni@nxp.com>
Enable `NET_ZPERF_SERVER` for samples that currently enable `NET_ZPERF`
to prevent feature regressions.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Instead of having an overlay move the Enterprise configurations to a
dedicated snippet so that it can be enabled with any sample.
Can be used along with Wi-Fi snippet e.g., `-S
"wifi-ipv4;wifi-enterprise"`.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Keep the minimum configurations in frdm_rw612.conf and rd_rw612_bga.conf
for basic STA functionality of embedded supplicant case.
Add the superset configurations in nxp/overlay_rw612.conf.
Add the supplicant support in nxp/overlay_hostap_rw612.conf.
Add the basic debug support in nxp/overlay_rw612_debug.conf.
Add the supplicant debug support in nxp/overlay_hostap_rw612_debug.conf.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Enable wifi node in all procpu dts, so Wi-Fi could be enabled simply by
enabling the CONFIG_WIFI. In turn some sample code overlay files can be
dismissed.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Add ULP Coprocessor board support for C6.
This requires a change in the board qualifier depending on the build
target.
Update esp32c6 overlay and configuration files to the proper name.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
This driver was deprecated and must be removed by Zephyr version
4.1 according to lifecycle/release guidelines.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Decouple dependency of CONFIG_NXP_WIFI_SOFTAP_SUPPORT.
Add wifi defconfig to set default kconfig options when soft AP
enabled.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Since a separate CONFIG_NET_TC_RX_SKIP_FOR_HIGH_PRIO was introduced for
RX TC queues, CONFIG_NET_TC_SKIP_FOR_HIGH_PRIO became ambiguous,
rename it to CONFIG_NET_TC_TX_SKIP_FOR_HIGH_PRIO and deprecate the old
config.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Using NET_TCP_MAX_SEND_WINDOW_SIZE and NET_TCP_MAX_RECV_WINDOW_SIZE
for TCP case.
Reduce net_buf count to save memory.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Convert vendor specific **_WIFI_BUILD_ONLY_MODE symbol as global
in order to provide common build flag to enable CI with no blobs.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
For the latest upstream, if MBEDTLS_ENABLE_HEAP is not enabled, it will
default select MBEDTLS_PSA_STATIC_KEY_SLOTS, and consume extra SRAM for
about 35KB. Therefore, default enable MBEDTLS_ENABLE_HEAP.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Remove CONFIG_HEAP_MEM_POOL_SIZE for RW612, it will use
HEAP_MEM_POOL_ADD_SIZE_ way to add all module's heap size
together, to better control heap size for different case.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Separate wifi example user config file to wifi network configurations
and hostap configurations.
User can set EXTRA_CONF_FILE as overlay-hostap.conf file to get
external hostap support.
Without overlay-hostap.conf, we will have embedded hostap.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Add EAP-TLS, EAP-PEAP-MSCHAPv2, EAP-PEAP-GTC, EAP-TTLS-MSCHAPv2,
EAP-PEAP-TLS, EAP-TLS-SHA256 enterprise wpa2 and wpa3 suiteb
support for sap.
Signed-off-by: Rex Chen <rex.chen_1@nxp.com>
As long as MBEDTLS_ENTROPY_C is enabled, Mbed TLS needs to
poll some entropy source to gather data that will then be
processed by CTR/HMAC-DRBG modules. This means that in most
of the cases, once MBEDTLS_ENTROPY_C is enabled then also
MBEDTLS_ENTROPY_POLL_ZEPHYR needs to be enabled. This was
done manually until now, as the long list of samples/tests
demonstrate.
This commit solves this dependency by defaulting
MBEDTLS_ENTROPY_POLL_ZEPHYR to on as soon as
MBEDTLS_ENTROPY_C is set. As a consequence, all manual
enablement of MBEDTLS_ENTROPY_POLL_ZEPHYR in samples/tests
are removed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Move samples/net/wifi application to samples/net/wifi/shell
as it has been used as a shell application before.
Following commits will add new wifi samples to this directory.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
