Add support for the simcom a76xx modem which is similar to the simcom 7080
but has a few key differences. Tested with a simcom A7672SA module but as
there is a single simcom A76XX AT commands manual, the driver should work
with other modems of the series.
Signed-off-by: Olivier Lalonde <o@syskall.com>
Allow configuring MTU for CMUX.
Some AT manual and specification define this as a
frame size. Linux ldattach default to 127 bytes,
3GPP TS 27.010 defaults to 31.
We should limit our CMUX frames to a size that
remote end is capable of handling.
Linux silently drops oversized frames.
Also, remove MODEM_CELLULAR_CMUX_MAX_FRAME_SIZE as
this was only limiting a buffer sizes, and resulted
CMUX frames to be capped to same value.
Use MODEM_CMUX_WORK_BUFFER_SIZE and MODEM_CMUX_MTU instead.
Also rename CONFIG_MODEM_CELLULAR_CHAT_BUFFER_SIZES to
CONFIG_MODEM_CELLULAR_CHAT_BUFFER_SIZE as it is now
only used as a Chat module. DLCI pipes use
CONFIG_MODEM_CMUX_WORK_BUFFER_SIZE.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Deprecate mode which is using TIMER+(D)PPI for reliable byte counting.
Recently a new approach is added (CONFIG_UART_NRFX_UARTE_ENHANCED_RX)
which supports reliable byte counting without additional HW resource.
This mode is planned to be the only supported RX path mode.
Enhanced RX has slightly different behavior. There are no partial RX
packets (events with non-zero offset). There is UART_RX_BUF_RELEASED
after each UART_RX_RDY event.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Convert them to native YAML lists. Support for space-separated
lists was deprecated in Twister a long time ago.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The OK response should be processed before entering CMUX mode.
Use UART ISR mode by default.
Fix warnings and errors produced by the sample.
Signed-off-by: Ryan Erickson <ryan.erickson@ezurio.com>
A hard fault occurs when the `sample_echo_packet` function attempts
to print the average time per successful echo and no packets have
been sent, resulting in a division by zero error. This fix adds a check
to ensure that `packets_sent` is greater than 0 before performing
the division. This prevents the system from halting due to a usage fault.
Signed-off-by: Natalia Pluta <pluta.natalia.m@gmail.com>
`checkpatch.pl` requires that dts sources are indented with tabs,
fix all the spaces that slipped in while checkpatch wasn't watching.
Signed-off-by: Jordan Yates <jordan@embeint.com>
The NRF91_SLM has no additional AT channel for the AT shell to
use. This commit disables the AT shell for boards which use
the NRF91_SLM.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Include new AT shell alongside the PM device shell to allow
for powering back up the modem after the sample has completed
to test out the at shell.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
select modem backend statistics and enable shell in cellular
modem sample. This will help advertise the feature, and can
help quickly identify issues with to small buffers.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Change the sample applications that use network socket API to
use the POSIX_API config because the NET_SOCKETS_POSIX_NAMES is
deprecated. Convert also the zsock_ API calls to plain BSD
socket API calls when applicable.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
So that the sample does not get stuck forever waiting
for an echo packet that will never come.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
- Async UART would start receiving some data incorrectly
without HW RX byte counting at baud rates above 115200.
- Increase the UART buffer sizes to be able to receive
whole UART TXs of 1500 bytes sent by SLM at once.
- Remove the Kconfig items whose definition is now redundant.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The added configuration files allow the sample to be run
on the nRF52840 present on the nRF9160 DK with the nRF9160
(running SLM) being the modem and communication happening
through pins that are routed internally between the two.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
- A small delay is added after the post-restart L4_CONNECTED event
is received to prevent trying to send packets too quickly. Otherwise
the first packet would not get sent and the sample would hang on recv().
- Some logs and function parameters are fixed.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The nRF91 series devices, when running the Serial LTE Modem (SLM)
application starting with nRF Connect SDK 2.6.0, can now be used as
standalone modems via the generic modem_cellular driver.
A configuration to run the cellular_modem sample on the nRF9160 DK
(plugged in to another nRF91 series device running SLM) is provided.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
- It now uses the first PPP network interface instead
of the default network interface.
- Logs are added/improved.
- Potentially unused modem_chat matches are declared as such
to suppress compiler warnings.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Use the new code-sample directive and roles to document the networking
samples so that they show up as "Related samples" when browsing the
various relevant networking APIs.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This commit adds a sample application which demonstrates how
to use the new driver and modules. The sample uses power
management to turn on the modem, uses network management
to wait for L4 connected, then uses DNS to get the IP
of the server running the python script found in the
server folder, which echoes back data recevied to it.
A packet containing psudo random data is then sent to
the server, which the echoes it back. To validate the
capability of the driver to restart the modem, the
modem is restarted, and the packet is sent again.
The server is hosted by linode, and uses the domain
name test-endpoint.com
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
