Add a precision about the CONFIG_DEBUG :
When CONFIG_DEBUG is set, the system will not enter the low power mode
The DEBUG is possible but with higher power consumption of the target.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Move the IronSide APIs to soc/nordic from drivers/firmware since
these are vendor specific APIs. The header files are now included
from <nrf_ironside/*.h>. Adjust code that uses these APIs accordingly.
Also move the DT binding for "nordic,ironside-call" from
bindings/firmware to bindings/misc.
Signed-off-by: Jonathan Nilsen <jonathan.nilsen@nordicsemi.no>
Extends support and adds new overlays.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Instead of using 32 bit enum values for event numbers, convert
the code to use 64 bit long bit fields. This means that the
user API is changed to use 64 bit event values instead of 32
bit event values.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Currently there is a mismatch between the naming of the hardware and
the drivers targetting the hardware. nrf2_ is used instead of
the actual bindings names, like nrf2_audiopll instead of
nrfs_audiopll. This makes it hard to map drivers to the hardware
they are targetting.
There is historical reason for some of this, namely the same binding
name was used for different hardware, which is why nrf2_ was used
on newer platforms. This is no longer the case though, so drivers
and configs can be named according to the hardware without conflict.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Add a new sample demonstrating the use of the Renesas ELC
Signed-off-by: Khanh Nguyen <khanh.nguyen.wz@bp.renesas.com>
Signed-off-by: Khoa Nguyen <khoa.nguyen.xh@renesas.com>
The circular DMA sample incorrectly configured channel 3 for the
NUCLEO-C031C6 board, but this MCU has only 3 channels (0 - 2).
Fixed by changing to channel 2.
Signed-off-by: Richard Skriwanek <richy@fnc.at>
Add resolving the requested clock spec and getting the startup time
of the clock for given clock spec to the nordic specific
clock_control sample.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Current ESP32 clock system is mixed with RTC labeling/registers,
but it doesn't implement a real-time clock (RTC) driver.
To avoid confusion and allow adding a proper RTC driver later,
this commit renames the existing RTC interface to CLOCK and make
it as a subsystem without any peripheral attached to it.
This better reflects its actual purpose as a general clock controller.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The boot report is used to pass information from IRONside to a CPU
being booted.
Integrate the boot report to the update service sample.
Signed-off-by: Håkon Amundsen <haakon.amundsen@nordicsemi.no>
Add a sample demonstrating how to use the IRONside update service to
update the IRONside SE firmware on the nrf54h20dk/nrf54h20/cpuapp/iron
board.
Co-authored-by: Håkon Amundsen <haakon.amundsen@nordicsemi.no>
Signed-off-by: Jonathan Nilsen <jonathan.nilsen@nordicsemi.no>
Add common structure for RTxxx AMP samples. Add amp_blink, amp_mbox,
amp_audio_output and amp_audio_loopback samples.
These samples are now configured only for the mimxrt685_evk, but are
intended to support other NXP microcontrollers with Xtensa-family cores
at a later date.
Signed-off-by: Vit Stanicek <vit.stanicek@nxp.com>
Add config and overlay to samples for testing stop/standby modes:
- samples/boards/st/power_mgmt/blinky
- samples/boards/st/power_mgmt/wkup_pins
I've measured consumption for each low-power mode:
- stop (regulator in run mode) ~217 uA
- stop (regulator in low-power mode) ~206 uA
- standby mode ~3.5 uA
Low-power mode wakeup timings from the datasheet,
but it barely meets these in reality:
- stop (regulator in run mode) 3.6 us
- stop (regulator in low-power mode) 5.4 us
- standby 50 us
It's possible to use RTC as idle timer to exit from stop mode.
Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua>
Add missing curly braces in if/while/for statements.
This is a style guideline we have that was not enforced in CI. All
issues fixed here were detected by sonarqube SCA.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add overlay for above board for testing. As the board does not have an
actual button, PA0 has to be connected to GND for wake-up.
Signed-off-by: Martin Jäger <martin@libre.solar>
Encode the packet type as a H:4 payload prefix for buffers passing to &
from HCI drivers. The existing bt_buf_set/get_type functions are
deprecated, but kept compatible with the change, except that they can only
be called once, since they modify the buffer payload.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Flexram is really not a memory controller, and does not belong in memc
namespace or directory. Move it to it's own misc directory and remove
memc_ from the namespace.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Moved to: include/zephyr/drivers/misc/flexram/memc_nxp_flexram.h
This change makes it so that the .h file does not need to be pulled in
using the CMakeLists.txt file, and can be included like other public
includes.
Removes drivers/memc/memc_nxp_flexram.h
Add memc_nxp_flexram.h to include/zephyr/drivers/misc/flexram
Modify drivers/memc/memc_nxp_flexram.c to use the new include path.
Modifies the mimxrt1170 magic_addr sample to include the driver using
the new include path.
Modify the soc file: soc/nxp/imxrt/imxrt11xx/soc.c to use the new path.
Add relevant information to migration-guide-4.2.rst.
Signed-off-by: Jacob Wienecke <jacob.wienecke@nxp.com>
Co-authored-by: Declan Snyder <declan.snyder@nxp.com>
Sample showing how to use the additional wakeup signal
in nordic,nrf-spis driver. The application, configured
as a SPIS, is put to sleep while waiting for an SPI
transmission. An external device working as a SPIM and
also handling the wakeup signal wakes the application
up just before the transmission starts.
Signed-off-by: Piotr Krzyzanowski <piotr.krzyzanowski@nordicsemi.no>
Not sure why this wasn't caught before but this sample needs a unique name
It conflicts with drivers/uart/echo_bot/README.rst
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Remove the support of the Nucleo WBA52CG board since it is NRND
(Not Recommended for New Design) and it is not supported anymore
in the STM32CubeWBA from version 1.1.0 (July 2023).
Signed-off-by: Nidhal BEN OTHMEN <nidhal.benothmen@st.com>
Add ULP directory for samples related to the
Ultra Low Power Coprocessor.
Add a sample to demonstrate the debug process of the LP Core
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Add ULP Coprocessor board support for C6.
This requires a change in the board qualifier depending on the build
target.
Update esp32c6 overlay and configuration files to the proper name.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Makes the sample build only in automatic test CI
Running on the nucleo_f411re board requires hsi enable
Running on the nucleo_wba55cg can still output the console
on the usart1 Tx even if the usart1Rx is used by the MCO output
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add printing reset reason at the beginning of the sample. Makes it easier
to determine if sample correctly wakes up from LP mode.
Signed-off-by: Bartlomiej Buczek <bartlomiej.buczek@nordicsemi.no>
This reverts commit 99e7223a1c.
Breaks CI with the following compilation error in SPI.c:52:
error: 'SPI_MASTER' undeclared here (not in a function)
Failing tests (cc3220sf_launchxl/cc3220sf)
- sample.net.sockets.echo.offload.simplelink
- sample.net.sockets.http_get.offload.simplelink
- sample.net.wifi
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
- It seems that the mask variants of GPIO functions are not present in
the latest sdk, so replace those with direct register access.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
Make this sample build/run on something that is supported.
depends_on was causing this to be completely left out.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adding board bbc_microbit_v2 overlay to pong example. This change
mainly enables to buzzer functionality of the example.
Signed-off-by: João Castilho <jpccastilho1999@gmail.com>
Currently, the soc/stm32/ccm.ld is not handled in
CMAKE_LINKER_GENERATOR.
This commit adds support, making STM32 supportable by
alternative linkers such as AC6 and IAR.
This commit also renames a variable to match all other
LOADADDR symbols.
Signed-off-by: Robin Kastberg <robin.kastberg@iar.com>
