- Added support for CAP_COMMANDER in configuration to allow tmap-cg
and tmap-ums roles to be validated. For CG and UMR, CAP INITIATOR
and CAP COMMANDER roles are mandatory. Without this support, config
"CONFIG_BT_TMAP_CG_SUPPORTED" & "CONFIG_BT_TMAP_UMS_SUPPORTED" are
not getting defined and function fail during "valid_tmap_role()".
- Replaced iso_pool user-data size from 8 to kconfig setting
"CONFIG_BT_CONN_TX_USER_DATA_SIZE" to allow conn_iso_send()
to success. Without it the user-data for iso_pool configured
with value 8 but the kconfig "BT_CONN_TX_USER_DATA_SIZE" has
default value as 16 causes conn_iso_send() function to fail.
- Updated audio_timer_timeout() with expected QoS interval value
to send ISO_SDU at every 10msec instead of 1 sec. Without this sink
device receiving null-sdu most of the time as ISO interval is 10ms
and unicast-source keep sends SDU at every 1 sec.
Signed-off-by: Nirav Agrawal <nirav.agrawal@nxp.com>
Adds a new abstract struct for unicast group that is
specific for CAP. The difference between this and the BAP
unicast group, is that the parameters are CAP streams and
thus ensuring that the streams in the group adhere to the
additional requirements that CAP has on top of BAP.
This also adds foreach functions for both CAP and BAP
to allow users to iterate on the streams in the
abstract groups.
Various samples, modules and tests have been updated
to use the CAP struct and API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a selection of interval values that are suitable for BAP,
which will allow better coexistence between ISO and ACL,
for both broadcast and unicast. Some of these are defined
by the BAP spec, and some are defined by Zephyr, since they
do have a suggested value from BAP.
Samples and tests have been updated to use these new values.
Peripheral samples have also been updated with
CONFIG_BT_GAP_AUTO_UPDATE_CONN_PARAMS so that the connection
parameters from the centrals aren't updated to something else
shortly after.
The shell has also been updated to use the LE Audio (BAP) values
if audio is enabled, and the audio.conf file has disabled automatic
updating of the connection parameters as the peripheral, as we rarely
(if ever) want to do that.
Due to the connection interval change, CI hit an issue
with test_bass_broadcast_code in test_main_client_sync, where
the reading of the long receive state did not finish before we
attempted to do another procedure, so the function was updated to have
a retry.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
native_posix is being removed as it has reached its end of life in 4.2,
after being deprecated since 4.0.
So these overlays will not serve any purpose anymore.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Remove the HCI command & event emulation layer for ECDH commands and
events. This means that we always do the necessary operations in the host.
The existing BT_ECC Kconfig option stays, but now gets automatically
enabled when necessary (e.g. based on the BT_SMP option), which is why this
commit removes so many explicit assignments in prj.conf files.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
The CCP API for the Call Control Profile works on top of the
TBS API, and will eventually replace parts of the TBS API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit sets PSA Crypto API as the default library to perform
ECC-DH in HCI, replacing TinyCrypt (which is being deprecated).
Therefore the symbol BT_TINYCRYPT_ECC is renamed as BT_SEND_ECC_EMULATION.
References in samples/tests are also fixed.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Modify the Kconfig options to depend on the GATT
features rather than selecting them.
This is part of an effort to reduce the amount of
selects we use in LE Audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The QoS structure is not related to a codec, but rather a
stream, and should thus not use the "Codec" name.
The BAP and ASCS specs refer to the QoS as
"QoS configuration" several places, so it is an obvious
choice for a name.
Since the structure is defined and used by BAP, the prefix
was changed from bt_audio to bt_bap.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Several samples used K_FOREVER when allocating buffers in the
system workqueue thread, which is prohibited.
The samples should rather retry later if TX fails.
This is not the ideal solution for the samples, but
fixes a bug. Ideally the samples would use a dedicated thread
to handle TX, instead of the system workqueue.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update the includes for Bluetooth Audio samples so they
properly include what they use.
The includes are then used to determine which relevant APIs
to refer to in the READMEs.
Finally improve the naming and description of the samples
using the Profile names and role.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit uses the new .. zephyr:code-sample-category directive to
categorize code samples across the tree.
Updates existing legacy references to manually defined targets to now
use :zephyr:code-sample-category: role instead.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
BAP mandates support for bondable mode for all central and
peripheral roles.
Due to Kconfig circular dependencies, some additional
Kconfig changes had to be made.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Any places that checked for GTBS is now always enabled
as GTBS is mandatory to support, and the Kconfig option
was removed.
Also removed a duplicate Kconfig option for TBS,
BT_TBS_SERVICE_COUNT, as it was unused.
The other Kconfig option BT_TBS_BEARER_COUNT is used
instead exclusively to set it if needed.
Since GTBS can now exist alone, it must also
support having its own calls and other values.
This means that the GTBS and TBS instances now share
the same underlying struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Since the CSIP API expects a set member struct for nearly all
functionality, the reference to the full set member (along with
the CAS specific CSIS) should be given to the application.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Derive BT_CTLR_ISO_TX_BUFFER_SIZE from BT_ISO_TX_MTU to have
optimal Controller memory allocations.
BT_CTLR_ISO_TX_BUFFER_SIZE can be set lower than
BT_ISO_TX_MTU in which case upper layer can send fragmented
SDU to the Controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The bt_iso_chan_send function could take an optional
timestamp by using 0 as an indicator. The issue with
this approach was that a timestamp value of 0 is valid,
and could cause potential issue with syncing streams
in a group.
To fully support transmitting with and without timestamp,
bt_iso_chan_send_ts has been introduced, which is the only
function of the two (bt_iso_chan_send being the other) that
supports timestamps.
A new function, rather than adding a boolean to the existing,
was chosen as it simplifies the individual functions as well
as making it more explicit what the function does.
Since the bt_iso_chan_send function is used by LE audio, both
the BAP and CAP send functions have similarly been updated.
Likewise, all tests and samples have been updated to use the
updated function(s), and BT_ISO_TIMESTAMP_NONE has been
removed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add const prefix for service uuid and char uuid.
Since Service UUID and Char UUID should not change in the service
definition, they are most reasonably defined as rodata, also for
save some ram footprint.
The field `attr->user_data` type is `void *`, as this PR change
all Service UUID to rodata, so there must add (void *) to avoid warning.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Instead of forcing use of NEWLIB_LIBC, select any available complete C
library implementation. Add CONFIG_REQUIRES_FLOAT_PRINTF and adjust
CONFIG_LIBC_MALLOC_ARENA_SIZE as needed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Replace the BT_AUDIO_CODEC_LC3_ID macro with the
BT_HCI_CODING_FORMAT_LC3 as there is no reason to
define and use the LC3 ID different than the other
allowed codec IDs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove the qos field from
bt_cap_unicast_audio_start_stream_param as it was not used.
The QOS values are set when creating the unicast group,
and not when starting the streams.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Refactor the bt_audio_codec_cfg to use flat arrays to store
metadata and codec specific configurations.
The purpose of this is to make it easier to copy the data
between layers, but also to support non-LTV data for non-LC3
codec configurations.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Refactor the bt_audio_codec_cap to use flat arrays to store
metadata and codec specific capabilities.
The purpose of this is to make it easier to copy the data
between layers, but also to support non-LTV data for non-LC3
codec capabilities.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the bt_codec struct to bt_audio_codec_conf or
to the new struct bt_audio_codec_cap.
Rename the bt_codec_data to bt_audio_codec_data.
The purpose of this is to split the codec specific configuration
and codec capabilities into seperate structs, as they do not
reflect the same values, or used for the same purpose.
This commit depends on the preset macros workings on either
type of struct (for now), but will be modified in future updates.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
As per table 4.2 in BAP v1.0.1, the BAP unicast client shall
support at least 2 (> 1) endpoints in either direction if it
supports that direction.
Since Kconfig does not support such requirements (0 || > 1),
this is done using a BUILD_ASSERT.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remove usage of Kconfig symbol `CONFIG_BT_DEBUG_LOG` from samples. It
has been deprecated since this PR:
https://github.com/zephyrproject-rtos/zephyr/pull/56183
The Kconfig symbols has been replaced by `CONFIG_LOG=y` on most of the
cases. Or it has been removed when not needed anymore.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The TMAP central had a few bugs. It was also using the old
BAP discovery API.
The commit fixes the bugs, and updates it to use the new BAP
discover API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add implementation of the Telephony and Media Audio Service, as well as
two sample applications.
tmap_central reflects a smartphone implementing the Unicast Media Sender
and Call Gateway TMAP roles.
tmap_peripheral reflects an earbud implementing the Unicast Media
Receiver and Call Terminal TMAP roles.
Upon connection, tmap_central starts an audio stream using CAP Initiator
APIs.
CCP, MCP and VCP are discovered and used to send example commands.
Future improvements: 2-earbud support, add TMAP Broadcast roles,
update with new CAP Acceptor/Commander APIs as they become available
Signed-off-by: Silviu Petria <silviu.petria@nxp.com>
