Fixed typo whereby the description field started with `description: |`
instead of actual description.
Also added a proper title field while at it
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add a new binding for the pinctrl controller of STM32N6 series.
The specificity of this series is the "I/O retime" feature not present on
other series. This new binding exposes pinctrl properties to configure this
feature.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Add MPS4 pinctrl support by referring to
`mps4/common/partition/platform_base_address.h`
from TF-M's main branch.
Signed-off-by: Sudan Landge <sudan.landge@arm.com>
low-power pins can be used while device power management enabled.
Usage
...
&uart0a_rx_p0_0 {
pinmux = <MAX32_PINMUX(0, 0, AF1)>;
low-power-enable;
/* Add low power mode flags, like: */
output-high;
bias-disable;
...
};
...
Default gpio sleep states are defined, user shall update sleep_pins
configuration as per of their needs
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Added a pinctrl driver support for MSPM0 Family.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Signed-off-by: Jackson Farley <j-farley@ti.com>
This adds a proper, concise, title property to a bunch of bindings for
which the first sentence of their description (which used to be a
makeshift title) was really long
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The CH32V006 and others in the CH32V00x series are an evolution of the
CH32V003 and use different remap offsets for the various peripherals.
In the same way as the CH32V20x, fork the CH32V003 driver and add
CH32V00x support.
Signed-off-by: Michael Hope <michaelh@juju.nz>
Intial support of pinctrl driver for Renesas RX MCU
family.
This support base on using Renesas RX driver package in
hal_renesas layer
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
Signed-off-by: Phi Tran <phi.tran.jg@bp.renesas.com>
Clean up dt binding descriptions and introduce titles where
needed to make board documentation pages look nice. The supported
hardware table on board documentation pages sources its data
from dt bindings, and needs succinct titles.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
This is the initial commit to support pinctrl driver for Renesas RZ/T2M
Corrected space in the comment.
Signed-off-by: Hieu Nguyen <hieu.nguyen.ym@bp.renesas.com>
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
Signed-off-by: Binh Nguyen <binh.nguyen.xw@renesas.com>
This is the initial commit to support pinctrl driver for Renesas RZ/V2L
Signed-off-by: Quang Le <quang.le.eb@bp.renesas.com>
Signed-off-by: Hieu Nguyen <hieu.nguyen.ym@bp.renesas.com>
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
This is the initial commit to support pinctrl driver for Renesas RZ/A3UL
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
Signed-off-by: Phuc Pham <phuc.pham.xr@bp.renesas.com>
This is the initial commit to support PINCTRL driver for Renesas RZ/T2L
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
Signed-off-by: Hieu Nguyen <hieu.nguyen.ym@bp.renesas.com>
This is the initial commit to support pinctrl driver for Renesas RZ/N2L
Signed-off-by: Hoang Nguyen <hoang.nguyen.jx@bp.renesas.com>
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
This device is included on Silabs SiWx91x series. The current driver is
able to manage "High Power" and "Ultra Low Power" pins.
Co-authored-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Add support for pinctrl to cc23x0 SoC. Like for other TI SoCs,
a node approach is implemented (no grouping approach).
Signed-off-by: Lars Thalian Morstad <l-morstad@ti.com>
Signed-off-by: Vebjorn Myklebust <v.myklebust@ti.com>
Signed-off-by: Stoyan Bogdanov <sbogdanov@baylibre.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
The GPIO peripheral on Silabs Series 2 devices is responsible for
allocating analog buses to analog peripherals. Enable support for
this in the pinctrl driver. Since these bus allocations are not
digital pins, introduce a new property silabs,analog-bus for this
purpose.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Improve the documentation of the IOMUXC GPR binding so that it is
clear what the cells in the specifier space of "pinmux" space mean. And
change the names of the cells to be more appropriate. "offset" instead
of "pin" and "mask" instead of "function" describes more precisely what
the cells in the specifier mean.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
- remove calculation of pinmux value for stm32 in device tree binding
documentation.
- stm32-pinctrl.yaml contains wrong calculation as can be compared to
#define STM32_PINMUX in stm32-pinctrl.h.
- stm32f1-pinctrl.yaml also contains different wrong calculation
compared to #define STM32F1_PINMUX in stm32f1-pinctrl.h.
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
This is the initial commit to support pinctrl driver for Renesas RZ/G3S
Signed-off-by: Quang Le <quang.le.eb@bp.renesas.com>
Signed-off-by: Nhut Nguyen <nhut.nguyen.kc@renesas.com>
Silicon Labs Series 2 and newer devices do alternate function
configuration fundamentally differently from Series 0 and 1. Pin routing
is done in a centralized fashion in the GPIO peripheral, as opposed to
having ROUTE registers in every peripheral. The concept of alternate
function location numbers also does not exist, functions are directly
assigned to GPIOs by their port and pin number.
This commit adds a new pinctrl driver for devices that use DBUS. It fully
makes use of pinctrl design principles as outlined in the Zephyr
documentation. The previous driver hard-codes pin properties such as filter
and pull-up/down in the driver itself, while the new driver leaves this up
to the user as configurable DeviceTree properties. The previous driver has
hard-coded support for UART, SPI and I2C, while the new driver has generic
support for all DBUS signals.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
This commit adds the pinctrl driver for WCH CH32V003.
Signed-off-by: Michael Hope <michaelh@juju.nz>
Signed-off-by: Dhiru Kholia <dhiru.kholia@gmail.com>
The NXP PORT pinmuxing peripheral is reused across the MCX, S32, and
Kinetis lines. Rename the compatible from the family-specific
nxp,kinetis-pinctrl to a more generic nxp,port-pinctrl to reflect the
actual name for the IP block used within reference manuals.
Update the NXP HAL revision to include a change to use the new Kconfig
name for the PORT pinctrl driver
Update the MAINTAINERS.yml path, as there are no longer any NXP drivers
matching the string "drivers/*/*kinetis*
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Remove the renesas,ra-pinctrl driver, which is no longer
needed after migrating to the FSP-based implementation.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Add a pinctrl driver for Microchip MEC5 HAL based chips.
The driver removes the YAML enum "no change" property
value from the driver strength and slew rate properties.
Update the shared header file in mec soc common folder to
use a different Z_PINCTRL_STATE_PINCFG_INIT for MEC5.
Modifications to legacy MEC172x XEC PINCTRL will be in
a future PR.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
support the configurations which apply for LVDS pads
+ termination resistor
+ current reference control
+ rx current boost
Signed-off-by: Tu Nguyen Van <tu.nguyenvan@nxp.com>
