There is no need for appdata pointer: net_pkt's cursor is already at the
right position, i.e. the beginning of the payload right after all IP/TCP
headers.
Also, when reading the actual data, let's use net_pkt_read_new()
relevantly instead of going through the buffer by ourselves.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no need for appdata pointer: net_pkt's cursor is already at the
right position, i.e. the beginning of the payload right after all IP/UDP
headers.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This function is only used in sockets, thus making it a private function
of socket library and renaming it relevantly.
Note that sockets should be reviewed at some point to avoid using such
function: zsock_received_cb() already get the ip header and the protocol
header, so it could grab the src addr/port from there. It would be way
more optimized to do so, since net_pkt_get_src_addr is costly as it
parses all over again the ip/protocol headers.
utils unit test is updated and the test of the former
net_pkt_get_src_addr/net_pkt_get_dst_addr are removed.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If a socket is in EOF, it's readable (so client can read() it, get 0
in return, figure it's in EOF, and close it). Without this change, we
had peer-closed sockets leaked (ignore) by poll() and select().
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Use DT_FLASH_ERASE_BLOCK_SIZE prefixed defined instead of
FLASH_ERASE_BLOCK_SIZE as the non-DT version is deprecated.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commits adds a new MQTT transport. The purpose is to be able to
connect to a MQTT broker through a SOCKS5 proxy.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Implemented via Zephyr's net_hostname_get(). As support for that call
is configurable and by default off, while many POSIX applications
assume that hostname is always available, we need a default value
in case CONFIG_NET_HOSTNAME_ENABLE is "n". Initial version of this
patch added that on the level of gethostname() call, but of was
suggested to move that down to net_hostname_get() instead.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
It is possible to set the filter in user application and that
information is passed to the CANBUS device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is basically a dummy layer that just passes data through.
It is needed so that we can create CANBUS type network interface
to the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This allows user to create a CAN socket and to read/write data
from it. From the user point of view, the BSD socket CAN support
works same way as in Linux.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds packet socket support to socket api.
This version supports basic packet socket features.
Protocol family is AF_PACKET, type of socket is
SOCK_RAW and proto type is ETH_P_ALL. The user will
receive every packet (with L2 header) on the wire.
For TX, the subsystem expects that the user has set
all the protocol headers (L2 and L3) properly.
Networking subsystem doesn't verify or alter the headers while
sending or receiving the packets. This version supports packet
socket over Etherent only. Also combination of other family
and protocols doesn't work (i.e. Application can not open
packet-socket and non packet-socket together).
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
A few cases were missed where we weren't cleaning up the existing
connection correctly. This was easily missed because we try and
clean up the connection everywhere.
Instead, let's clean up any existing connection prior to starting
a new one in the do_bootstrap_reg() and do_registration()
functions.
Signed-off-by: Michael Scott <mike@foundries.io>
- Fix enum naming throughout
- Correct next_instance logic
- Move to registration server if no bootstrap server is found
- Fixes to logging
Signed-off-by: Michael Scott <mike@foundries.io>
As the legacy library has been removed, we no longer need to
differentiate betwen MQTT implementations. Therefore align the library
folder name with other libraries and remove the `_sock` suffix.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As we are removing net_app and net_pkt based libraries and
applications, CoAP legacy based libraries and apps are moved
to socket based implementations. So removing legacy CoAP.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If status is 0, both ip_hdr and proto_hdr will own a pointer to the
relevant IP and Protocol headers. In order to know which of ipv4/ipv6
and udp/tcp one will need to use respectively net_pkt_family(pkt) and
net_context_get_ip_proto(context).
Having access to those headers directly, many callbacks will not need
to parse the packet again no get the src/dst addresses or the src/dst
ports. This will be change after this commit.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's now up to net_context to build the net_pkt and send it.
This will become the default.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The net-app API is removed. Users should use the BSD socket API
for application development.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Previously, the net_app layer handled DNS support as a part of
network initialization. With the move to BSD-socket APIs,
we need to add support for DNS to the LwM2M library.
Signed-off-by: Michael Scott <mike@foundries.io>
This commit resets the firmware status to IDLE after a bad
download attempt. Previously, the firmware object would stay
in an odd state and any further attempts to download firmware
would return an error.
Signed-off-by: Michael Scott <mike@foundries.io>
We can save some resources by removing the periodic service thread
and replacing it by queuing the services to the work queue.
Before (reel_board using BT + DTLS)
Memory region Used Size Region Size %age Used
FLASH: 289464 B 1 MB 27.61%
SRAM: 75620 B 256 KB 28.85%
IDT_LIST: 136 B 2 KB 6.64%
After
Memory region Used Size Region Size %age Used
FLASH: 289576 B 1 MB 27.62%
SRAM: 74596 B 256 KB 28.46%
IDT_LIST: 136 B 2 KB 6.64%
Signed-off-by: Michael Scott <mike@foundries.io>
Now that the security data can be loaded into and used from the
security / server objects, we can add support for LwM2M bootstrap.
This is a mode where initially a connection can be made to a server
which can update several LwM2M (including security and server
data) and then trigger a "bootstrap complete". Once this happens
the client will start it's connection process over but now with
the new information.
Signed-off-by: Michael Scott <mike@foundries.io>
In order to support bootstrap mode, we need to store server data
in the security / server objects. Once the connection to the
bootstrap server is made, it will clear these objects and add
new server connection data.
Signed-off-by: Michael Scott <mike@foundries.io>
For bootstrap support, we need to store connection credentials
in the security object. This way the client can start a connection
at index 0 and after bootstrapping, move to the next connection.
Let's add the needed fields and a config item to set the key length.
Signed-off-by: Michael Scott <mike@foundries.io>
Update the parsing functions for JSON used by the JSON data
formatter and enable it in the LwM2M engine.
Signed-off-by: Michael Scott <mike@foundries.io>
The JSON formatter is currently not enabled for incoming WRITE
operations. To update the code in the formatter and not litter
the input context with extra data, let's allow formatters to
store their own user data.
Signed-off-by: Michael Scott <mike@foundries.io>
net_app contexts save the remote address and we use this during
observe notifications and pending handling. If we move to another
network layer such as sockets, then the remote address becomes
harder to reference. Let's save it as a part of the client
context.
Signed-off-by: Michael Scott <mike@foundries.io>
As part of the migration from net_app APIs to socket APIs, let's
stop referencing the net_pkt fragments throughout the LwM2M library.
Establish a msg_data flat buffer inside lwm2m_message and use that
instead.
NOTE: As a part of this change we remove the COAP_NET_PKT setting.
The COAP library reverts to COAP_SOCK behavior.
This doesn't mean we use sockets in LwM2M (yet), it only means we
use the socket-compatible COAP library which parses flat buffers
instead of net_pkt fragments.
Signed-off-by: Michael Scott <mike@foundries.io>
Currently, this will select the needed configs for LwM2M and net_pkt.
During the migration to socket APIs, the net_pkt selections will change
to socket-based selects.
Signed-off-by: Michael Scott <mike@foundries.io>
The original SNTP client library was designed for the net-app API, for
which it makes sense to have a callback function, which is called
asynchronously when an answer is received.
For the socket based interface, the callback is called just before
sntp_request() returns. It gets the status and the epoch_time in
parameter, however the status is already returned by sntp_request(). It
therefore make sense to replace the callback function by a pointer to
epoch_time.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The relationship between lwm2m_engine_context and lwm2m_message
has always been a tenuous one. Let's merge the 2 structures
into lwm2m_message and remove all of the extra stack variables.
This change increases SRAM usage slightly due to the
addition of the context structures to the multiple lwm2m_messages.
However, the way lwm2m_engine_context was being used off the stack
was probably creating hard to debug issues in the longterm.
Also, having all of the structures in 1 place makes sharing them
much easier later.
Signed-off-by: Michael Scott <mike@foundries.io>
Reported by Github user himanshujha199640 using coccinelle:
subsys/net/lib/lwm2m/lwm2m_obj_device.c:172:5-16:
WARNING: Unsigned expression compared with zero.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/11135
Signed-off-by: Michael Scott <mike@foundries.io>
CONFIG_NET_CONTEXT_NET_PKT_POOL is used by Zephyr's TCP stack as
a way of keeping the original packet data when compression and
other l2 specific actions make the data unusable for retries.
LwM2M uses UDP and this option was never used.
Signed-off-by: Michael Scott <mike@foundries.io>
As networking libraries and protocols are moving to socket
based implementation, reworked SNTP client library to use sockets.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The old and deprecated net-app based MQTT library is removed.
See the BSD socket based MQTT library for a replacement.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The implementation code itself should not rely on plain POSIX names
and use zsock_ and ZSOCK_ prefixed versions of symbols.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The old legacy APIs use net-app library and as that is being
removed, then the dependencies need to be removed also.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
struct timeval is per POSIX defined in sys/time.h, but that also
allowed to pull sys/select.h (and indeed, it does with native_posix),
which then starts to conflict with out select implementation (if
NET_SOCKETS_POSIX_NAMES is defined, and many samples/tests have it).
So, for now follow the existing route of duplicating all definitions
needed by our code in namespaced manner. Things like struct timeval
usage will need to be revisited later, when we'll want socket
subsystem to work with POSIX subsystem, but that's a separate deep
matter.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
It's implemented on top of poll() anyway, and the current
implementation of fd_set uses array of fd's underlyingly, which
leads to O(n) complexity for FD_SET() and friends.
The purpose of select() implementation is to allow to perform
proof-of-concept port of 3rd-party code to Zephyr quickly. For
efficiency, poll() should be used instead.
Fixes: #11333
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
