Instead of having one single WQ per backend, move to one WQ per
instance instead and add a new "zephyr,priority" property in the DT to
set the WQ priority of the instance. Fix the sample as well.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Add the telephone bearer service server implementation.
This support multiple service instances as well as the
generic telephone bearer service, but is still a work in
progress and should be treated as such.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Based on introduction of plain GPIO configurations in STM32 pinctrl
bindings, update STM32 pinctrl/gpio drivers to make this functionality
available.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Remove the duplicated pairing_complete, pairing_failed
and bond_deleted informational callbacks from bt_auth.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a new callback structure for Bluetooth authentication
This struct is meant to replace the information-only
callbacks in bt_conn_auth_cb. The reason for this is that
due to the nature of bt_conn_auth_cb, it can only be registered
once. To allow mulitple users gain information about pairing
and bond deletions, this new struct is needed.
Samples, tests, etc. are updated to use the new struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a brief overview and description of the GAF.
This also creates initial references to the LE Audio
implementations.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add `ing` to the `BT_ISO_CONNECT` and `BT_ISO_DISCONNECT`
states, so that the name better matches the actual state.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a state field in struct bt_conn_info that is a simplified
version of the internal state value (bt_conn_state_t).
This should provide an application to better determine the state
of the connection whne calling bt_conn_get_info, in case the
application does not keep track of the state itself.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Define the MSI/MSI-X APIs to be used with the Generic PCIe Controller API.
It notably adds the msi_device_setup() callback to the PCI Express
Controller API used to allocate and setup the MSI/MSI-C vectors on the
MSI message translater HW.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Add get_msi_addr() callback to ITS API to retrieve the GITS_TRANSLATER
physical address to be set in the MSI message address field.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
This implements Core 5.3 recommendation to skip MTU Exchange procedure
if already performed by peer.
Core 5.3 | Vol 3, Part F 3.4.2.2:
If MTU is exchanged in one direction, that is sufficient for both
directions.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The MTU can be exchange once during the connection by the client.
This ensures the ATT MTU Exchange request will not be sent again.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Move the `pm_device_runtime_init_*` functions from <pm/device_runtime.h>
to <pm/device.h>. The initial device state should be settable
independently of whether `CONFIG_PM_DEVICE_RUNTIME` is enabled.
This also resolves a compilation error when attempting to use these
functions without also including <pm/device.h>.
Function documentation is also updated to be more general than only
referencing runtime PM, as this also applies to system PM and manually
run actions.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This update current Atmel sam0 pinctrl initiative to current Zephyr
pinctrl API. It update current devicetree bindings and add the sam0
pinctrl driver.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This update current Atmel sam pinctrl initiative to current Zephyr
pinctrl API. It update current devicetree bindings and add the sam
pinctrl driver.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Added the stop_bits_client parameter to the modbus_serial_param struct.
Being able to configure the number of stop bits for the client
independently from the parity setting, allows to support connecting to
modbus server that do not follow the MODBUS over Serial Line Specification
and Implementation Guide.
Signed-off-by: Constantin Krischke <constantin.krischke@lemonbeat.com>
Signed-off-by: Jan Geldmacher <jan.geldmacher@lemonbeat.com>
Remove redundant @typedef doxygen commands from the CAN API
documentation. These doxygen commands are only needed if documenting a
typedef separate from its declaration.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
It can be useful to know what a node's index is in its parent's list
of children. This information is now available to C via
gen_defines.py, but no user-facing macros are available to access it.
Add a macro which exposes this information to users via devicetree.h.
Some APIs want to build on devicetree.h by creating some derived
structure for each of a node's children. It can therefore be
convenient to use each child's index in the list of children as an
identifier for the child.
Some concrete and common examples are "gpio-keys" and "gpio-leds",
which allow you to define arbitrary numbers of keys and LEDs as child
nodes of nodes with those compatibles. Derived APIs can use a key or
LED node's index in its list of parents as a way to identify which of
several structures is relevant to a particular controlled key or LED.
These are just examples, though -- the feature added here makes no
assumptions about where it's being used.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add a (initally hidden) Kconfig option for broadcast source
used to determine the size of the advertisable BASE.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In addition to x86-32, POSIX boards are also affected by the issue
where a `long double` has the size of 12.
Simplify the process by setting the alignment to 16 for xtensa (as
before). Then defaulting to using `long double` if the config is set.
The case of 12 byte `long double` is then handled by Z_POW2_CEIL when
available. Otherwise, a BUILD_ASSERT is used to verify that alignment
is valid.
Signed-off-by: Yuval Peress <peress@google.com>
When not using 64 bit mode, the implementation of Z_POW2_CEIL should
be using __builtin_clz instead of __builtin_clzl.
Signed-off-by: Yuval Peress <peress@google.com>
Fixup typo found in `hawkbit.h`. Fixes from "faile" to "fail"
Edit: change all occurences of "Hawkbit" to "hawkBit" in comments as
requested in [1].
[1] https://github.com/zephyrproject-rtos/zephyr/pull/44024
Signed-off-by: Wilfred Mallawa <thulith.mallawa@uqconnect.edu.au>
The ARRAY_SIZE macro uses sizeof and thus the return
type should be an unsigned value. size_t is typically
the type used for sizeof and fits well for the
ARRAY_SIZE macro as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds a simple boolean check of whether the Bluetooth subsystem has been
enabled. This allows users outside of `subsys/bluetooth` to check
whether they can send HCI commands.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
added API and syscalls for reset controller
added reset controller devicetree macro public API header file
Signed-off-by: Andrei-Edward Popa <andrei.popa105@yahoo.com>
the tlc5971 driver uses spi for controlling the global brightness
and individiual pixel brightness of a daisy chain of tlc5971
devices.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@escolifesciences.com>
So far the I2C channel connected to the battery has chosen the option
of Standard-mode 100KHz, but according to the SI(Signal Integrity)
test report, the I2C channel doesn’t meet the tHD;DAT Margin/Threshold
in the SI test. In fact, the timing could be adjusted by changing the
settings in the related timing registers in EC, but unfortunately the
limitation exists due to the fact that the timing registers have been
currently occupied by another channel for the same reason, that is,
adjusting the timing.
However, according to the I2C specification, the Standard-mode (Sm)
has a bit rate up to 100 kbit/s, so far the battery use the option
of standard mode 100KHz in the SMCLK setting register. This SMCLK
setting register also provides standard mode 50KHz for usage.
According to another SI test reports, so far the Standard-mode 50KHz
setting looks good in the SI test.
Therefore, add a #define I2C_SPEED_DT allows the device tree to
write a specified speed without causing i2c_configure() and
i2c_get_config() to return error.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
If such table pointer is present with EFI system table, this will speed
up ACPI initialization later on.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As for Multiboot, let prep_c be aware of EFI boot.
In the futur, EFI will pass an argument to it.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In order to mitigate at runtime whether it booted on multiboot or EFI,
let's introduce a dedicated x86 cpu argument structure which holds the
type and the actual pointer delivered by the method (multiboot_info, or
efi_system_table)
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Just a dummy function will do.
When enabled, the code does not need the #ifdef as cmake is handling
this properly already. This was also the wrong CONFIG_ used there
anyway.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This commit adds ipc backend, that relies on simple
inter core messaging buffer also added by this commit.
This backend is configurable with DT overlay. Each
ipc instance could be defined with ipc-icmsg commpatible.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
