This commit moves the BLE GATT Battery service
from /samples/bluetooth/gatt to /subsys/bluetooth/services and
adds a Kconfig entry to enable and configure the service;
when enabled, it will register itself automatically.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Current implementation of LwM2M engine doesn't allow users a way
of overriding TLS credential load with custom function. This
would be needed by an offloaded TLS stack where we don't want
to use standard Zephyr functions.
Let's add a load_credential function pointer to the LwM2M client
context which will be called when it's available.
Fixes: https://github.com/zephyrproject-rtos/zephyr/issues/17408
Signed-off-by: Michael Scott <mike@foundries.io>
The name disk_access_sdhc.c is ambiguous,
actually this driver depends on SPI,
rename this file.
In addition, move the generic sdhc stuff from C file
to head file for other sdhc drivers to use.
1) disk_access_sdhc.c->disk_access_spi_sdhc.c.
2) create .h and move sdhc specifications from .c to .h.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Added flags for controling detection of setting alarm to late.
Updated drivers to return -ENOTSUP when new option is requested.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Flags in alarm configuration structure will allow further extention
without breaking API. Initially, existing absolute flag was added
as the only flag.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Let's remove depends on NET_LLDP from all the options. It avoids this:
# CONFIG_NET_LLDP is not set
# CONFIG_NET_LLDP_LOG_LEVEL_OFF is not set
# CONFIG_NET_LLDP_LOG_LEVEL_ERR is not set
# CONFIG_NET_LLDP_LOG_LEVEL_WRN is not set
# CONFIG_NET_LLDP_LOG_LEVEL_INF is not set
# CONFIG_NET_LLDP_LOG_LEVEL_DBG is not set
CONFIG_NET_LLDP_LOG_LEVEL_DEFAULT=y
CONFIG_NET_LLDP_LOG_LEVEL=3
CONFIG_NET_LLDP_CHASSIS_ID="CHASSIS_ID_PLACEHOLDER"
CONFIG_NET_LLDP_PORT_ID="PORT_ID_PLACEHOLDER"
And instead it will generate this:
# CONFIG_NET_LLDP is not set
Make the menu as an enablement config option as well.
Adapting lldp header file relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If DNS server(s) are added or removed e.g., as part of DHCP
processing, send newly defined net-mgmt events so that
a user application may get this information.
Fixes#16924
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Removing an IPv4 router was missing, as well as finding the default
router for an IPv4 address.
Note howevere that IPv4 router features are not used anywhere yet. But
at least the API is there and is a 1:1 to IPv6, if that matters.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- router lifetime is always a u16_t so fixing
net_if_ipv6_router_update_lifetime() signature.
- Coalescing router timers into one: this reduces the net_if_router
structure by 22 bytes
- refactor IPv6 and IPv4 router code so it's handled in generic
functions, to avoid duplicating 90% of the code for each family. This
also fixes the lifetime support for IPv4 which was missing.
Note however that IPv4 routing support seems to be missing as none of
the relevant functions are used anywhere yet.
Fixes#8728
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There will probably be at some point a way to remove IPv4 router, and
thus it will require such event.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This reduces the size of struct net_if_ipv6 by 24 bytes by moving
the k_delayed_work attribute into net_if core code.
Then each net_if_ipv6 can be added to the timer handler via a slist.
This does not make much gain if the system has only 1 network interface
It starts to be interesting if it has 2+ network interfaces then.
Fixes#8728
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This reduces the size of struct net_if_addr by 24 bytes by moving
the k_delayed_work attribute into net_if core code.
Then each net_if_addr can be added to the timer handler via a slist.
This does not make much gain if the system has only 1 unicast IPv6
address. It's a nice memory improvment once it has 2+ unicast IPv6
address. Note that having IPv4 enabled along with IPv6 will also see
memory improvements since both IPv6 and IPv4 use the same struct
net_if_addr.
Fixes#8728
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
DAD use dad_count attribute in struct net_if_addr, since DAD is ran on
each and every ipv6 unicast address.
Fixes#8728
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Move BUILD_ASSERT to the end of K_MEM_POOL_DEFINE.
K_MEM_POOL_DEFINE can not be processed if
combined with an other macro like __section.
Fixes: #17313
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Doxygen comment was referencing deprecated function counter_set_alarm
when the intention was to reference counter_set_channel_alarm.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The handcrafted allocation falls victim of misaligned structures due to
toolchain padding which crashes the socket test code on 64-bit targets.
Let's move it to the iterable section utility where those issues are
already taken care of.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The code in shell_history_put() adds padding to new entries so they
are pointer aligned. The whole buffer has to be so aligned too.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
These empty functions needed to be declared static inline
or we get build errors if the header is included by more
than one C file.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The network interface events should be in L2 layer so there
is no one that would emit L1 events so no need for it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Ensure that xcc is at parity with gcc and clang by inferring missing
definitions based on those that it already provides.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This can be used to activate the network packet statistics
collection. Note that we do not have resources to calculate
each network packet transit times but we collect average times
instead.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Finalize the CONFIG_NET_CONTEXT_TIMESTAMP support that was started
earlier but never properly finished. We collect network statistics for
TX packet network stack throughput time from when the net_context_send
is called and when the net_pkt was sent out successfully by the network
device driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When tickless is available, all existing devices can handle much
higher timing precision than 10ms. A 10kHz default seems acceptable
without introducing too much range limitation (rollover for a signed
time delta will happen at 2.5 days). Leave the 100 Hz default in
place for ticked configurations, as those are going to be special
purpose usages where the user probably actually cares about interrupt
rate.
Note that the defaulting logic interacts with an obscure trick:
setting the tick rate to zero would indicate "no clock exists" to the
configuration (some platforms use this to drop code from the build).
But now that becomes a kconfig cycle, so to break it we expose
CONFIG_SYS_CLOCK_EXISTS as an app-defined tunable and not a derived
value from the tick rate. Only one test actually did this.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
If maxsize is smaller than _MPOOL_MINBLK, then Z_MPOOL_LVLS() will be 0.
That means the loop in z_sys_mem_pool_base_init() that initializes the
block free list for the nonexistent level 0 will corrupt whatever memory
at the location the zero-sized struct sys_mem_pool_lvl array was
located. And the corruption happens to be done with a perfectly legit
memory pool block address which makes for really nasty bugs to solve.
This is more likely on 64-bit systems due to _MPOOL_MINBLK being twice
the size of 32-bit systems.
Let's prevent that with a build-time assertion on maxsize when defining
a memory pool, and adjust the affected test accordingly.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The "bits" field in struct sys_mem_pool_lvl is unioned with a pointer.
That leaves more space for inline free bits on 64-bit targets.
Let's declare it as an array and adjust its size based on the pointer
size. On 32-bit targets the generated code remains identical.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Minimum alignment and rounding must be done on a word boundary. Let's
replace _ALIGN4() with WB_UP() which is equivalent on 32-bit targets,
and 64-bit aware.
Also enforce a minimal alignment on the memory pool. This is making
a difference mostly on64-bit targets where the widely used 4-byte
alignment is not sufficient.
The _ALIGN4() macro has no users left so it is removed.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
The MVIC is no longer supported, and only the APIC-based interrupt
subsystem remains. Thus this layer of indirection is unnecessary.
This also corrects an oversight left over from the Jailhouse x2APIC
implementation affecting EOI delivery for direct ISRs only.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Don't allow inadvertent use of the existing z_x86_msr_read() when
compiled in long mode (CONFIG_X86_LONGMODE) as it won't work.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
These inlines currently only apply to IA32, so place accordingly.
Minor changes to direct and indirect users of the file for ordering.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This file is only included from arch.h, so merge it into same. This
also avoids confusion with files in arch/x86/include/ of the same name.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The compiler is going to make better per-arch/per-implementation
choices about bit operations, so let's use the common definitions.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This header is currently IA32-specific, so move it into the subarch
directory and update references to it.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Making room for the Intel64 subarch in this tree. This header is
32-bit specific and so it's relocated, and references rewritten
to find it in its new location.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This file is currently IA32-specific, so it is moved and the
reference to it at the arch-independent layer is moved.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This file is 32-bit specific, so it is moved into the ia32/ directory
and references to it are updated accordingly.
Also, SP_ARG* definitions are no longer used, so they are removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Eliminate definitions for MSRs that we don't use. Centralize the
definitions for the MSRs that we do use, including their fields.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This pattern exists in both the include/arch/x86 and arch/x86/include
trees. This indirection is historic and unnecessary, as all supported
toolchains for x86 support gas/gcc-style inline assembly.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Adding Health Thermometer Service sample. Refer to Health Thermometer
Profile Specification for detailed information about the Health
Thermometer Profile.
Signed-off-by: Aaron Tsui <aaron.tsui@outlook.com>
Extended clock configuration to allow usage of external clock
source for nrf52 series.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
This mechanism had multiple problems:
- Missing parameter documentation strings.
- Multiple calls to k_thread_name_set() from user
mode would leak memory, since the copied string was never
freed
- k_thread_name_get() returns memory to user mode
with no guarantees on whether user mode can actually
read it; in the case where the string was in thread
resource pool memory (which happens when k_thread_name_set()
is called from user mode) it would never be readable.
- There was no test case coverage for these functions
from user mode.
To properly fix this, thread objects now have a buffer region
reserved specifically for the thread name. Setting the thread
name copies the string into the buffer. Getting the thread name
with k_thread_name_get() still returns a pointer, but the
system call has been removed. A new API k_thread_name_copy()
is introduced to copy the thread name into a destination buffer,
and a system call has been provided for that instead.
We now have full test case coverge for these APIs in both user
and supervisor mode.
Some of the code has been cleaned up to place system call
handler functions in proximity with their implementations.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Currently only setting and getting of Ethernet Qav options are
supported via this interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
