Add the pm_control fn to the dummy_driver so the full PM API is tested.
This change also bypasses all PM APIs if the device driver doesn't
support PM.
Signed-off-by: Keith Short <keithshort@google.com>
The shared multi-heap memory pool manager uses the multi-heap allocator
to manage a set of reserved memory regions with different capabilities /
attributes (cacheable, non-cacheable, etc...) defined in the DT.
The user can request allocation from the shared pool specifying the
capability / attribute of interest for the memory (cacheable /
non-cacheable memory, etc...)
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Updated uart_rx_enable() and uart_tx() to use timeout given
in microseconds. Previously argument was given in milliseconds.
However, there are cases when milliseconds granularity is not
enough and can significantly reduce a throughput, e.g. 1ms is
100 bytes at 1Mb.
Updated 4 drivers which implement asynchronous API. Updated
places where API was used.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The receiver and transmitter in the test are synchronized by
use of sleep functions. The change in handling of periodic
advertising synchronized event caused missmach in waiting
times. Receiver is notified about established synchronization
later that it was in the past. Due to that the wait for end
of transmitter operation was too long.
Temporary fix for the problem is decrease of receiver sleep
time by one periodic advertising interval.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
In test cases MESH/NODE/TNPT/BV-04-C and MESH/NODE/TNPT/BI-01-C
the PTS is sending incomplete Seg Ack 3 times and in some cases we run
out of retransmit attempts before PTS sends complete Seg Ack. As a
workaround, increase Segment Retransmit Count to improve stability of
these tests.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
The test is using device and device runtime power management. Just
including them to the test build.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Remove CC1200 and CC2520 devicetree nodes from the test as they are not
sensors and are not being built by this test regardless.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Adds build_all for ieee802154 drivers. A substantial number of drivers
are for SoC peripherals, so test cases are required many boards.
Fixes#11519.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Remove two unused files that were left floating around when the
build_all sample was split up.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Apply the modifications required by the newer library version.
These modifications came from the original file in the mbedTLS
repository.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Apply the modifications required by the newer library version.
These modifications came from the original file in the mbedTLS
repository.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
In some scenarios when there is a need for multiple re-transmissions of
segmented messages the default value of 2 seconds may be not enough.
In my experience this improves stability of Configuration Client tests
involving multiple PTS instances.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Call and validate the new function. Note that this is actually
whiteboxing the heap implementation and duplicating the internal logic
needed to compute the header size, so as to validate that the correct
number is being returned. I had to write that test code anyway, might
as well commit it (the heap header is awfully well optimized now and
very unlikely to change).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
When CONFIG_KERNEL_COHERENCE=y (e.g on the various intel_adsp
platforms under SMP) it's not legal to share stack memory between
CPUs, because the stack is cached, and the L1 cache is incoherent.
The kernel will automatically detect the mistake when the memory
contains a kernel object (spinlock, IPC object, etc...). But here the
test was just passing async buffers into the msgq layer, and nothing
watches that.
The fix is simple: make them static.
Fixes#35857
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Remove explicit disable of Channel Selection Algorithm #2
in the mesh tests that use Extended Advertising.
Fixes#39188.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Configure the target board to PASS the test case.
The PCLK2 clock feeding the SPI1 is reduced by 2 (apb2 prescaler)
to accept the slow freq config.
The SPI1 MISO and MOSI pins are linked on the HW board
(on arduino CN13, D11 & D12)
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add an application agnostic State Machine Framework library to
Zephyr that provides an easy way for developers to integrate
state machines into their application.
Twister passed:
twister -T tests/lib/smf/
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
This allows UT to reconfigure MTU of a channel and get notfied when
channel configuration changed.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Add a simple coverage test for the multi_heap utility, validating all
cases with a simple configuration value that specifies an index in an
array of heaps.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Implement support for Periodic Advertiser List to be used
in LE Periodic Advertising Create Sync command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add unit tests that will ensure the CTE disable operation does not
cause breaking of LLL operations by too early release of chained PDUs.
The tests verify if numbers of PDUs in free PDUs fifo and free PDUs
memory pool are correct.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
tests/lib/ringbuffer is now finally fixed with commit 15e834a687
("linker: __data_region_start equal to __data_start"), so we can enable
it back.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
This reverts commit 4c32e21fc7 with some
manual conflict resolution.
It's not clear that the supported devices are being properly computed,
so let's revert this for v2.7.0 until we've had more time to think
it through.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Since the tests expects devices to change states, PM_STATE_RUNTIME_IDLE
can't be used. The first state that cares about devices is
PM_STATE_SUSPEND_TO_IDLE.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use separate DUT and TST builds in EDTT HCI tests so that
the tester can send Data Length Requests with txOctets and
maxTxTime as required by the test specification. TST build
has HCI parameter checks disabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
PR includes test that combines and checks OOB public key
provisioning with all possible OOB authentications
and OOB public key provisioning without auithentication.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
There were some leftovers in logging after attempt to use
logging as tracing backend. Removing all references since it
lead to test compilation failures.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Assert messages are printed if the assertion fails, so they should
state what went wrong instead of the expected behaviour.
Signed-off-by: Martin Jäger <martin@libre.solar>
Added log_internal.h for internal APIs. Move functions out of
log_core.h. Log_core.h shall have only macros and functions related
to logging message creation. Log_core.h is included by log.h thus
number of dependencies in that headers must be limited to minimum
to allow including without risk of circular dependencies.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add testing for the PIN_ONLY API variant (which has a separate run
queue per CPU). Predicate on SMP systems only, to keep needless
duplicate testing to a minimum.
Note that one of the cases in this test exercises an "all cpus" option
for the cpu mask, which is illegal when CONFIG_SCHED_CPU_MASK_PIN_ONLY
is set. Skip.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
When creating a socket, all of the registered socket implementation are
processed in a sequence, allowing to find appropriate socket
implementation for specified family/type/protocol. So far however,
the order of processing was not clearly defined, leaving ambiguity if
multiple implmentations supported the same set of parameters.
Fix this, by registering socket priority along with implementation. This
makes the processing order of particular socket implementations
explicit, giving more flexibility to the user, for example when it's
neeed to prioritze one implementation over another if they support the
same set of parameters.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fix the trigger_fault_access. The fix is similar to cortex m.
Fix the trigger_fault_divide_zero. The fix is similar to qemu, i.e.
skip this testcase, because FVP would not trigger the exception for
dividing zero either.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
After doing some tests on Armv8R aarch64 board, the used stack memory
exceeds the stack size for about 64 bytes. Extending ZTEST_STACKSIZE
to 5120 can fix it.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
As per #38352, we would like to start building out PTP (IEEE 1588)
support for superset of gPTP functionality in Zephyr. This is the first
step to abstract away some key interfaces from NET_GPTP umbrella to
NET_L2_PTP.
Signed-off-by: Alex Sergeev <asergeev@carbonrobotics.com>
BubbleSim tests that check provisioning with all possible (from spec)
OOB authentications
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Add a simple ITS driver test allocating 8192 LPIs over 256 DeviceIDS
and 32 EventIDs per DeviceID to exercise the ITS for the MSI/MSI-X
usecase.
The test is set as `build_only: true` and whitelisted to the
fvp_base_revc_2xaemv8a board until the shipped Zephyr QEMU
has the ITS support.
Since `fvp_base_revc_2xaemv8a` needs FIP & BL1 files, test is marked
as `skip: true`.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
