Use device tree provided configurations for arm architecture timer
PPIs.
This fixes issue of timer ppi not working on most hardware where
edge-triggered PPI are not supported.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
x86-32 thread objects require special alignment since they
contain a buffer that is passed to fxsave/fxrstor instructions.
This fell over if the dummy thread is created in a stack frame.
Implement a custom swap to main for x86 which still uses a
dummy thread, but in an unused part of the interrupt stack
with proper alignment.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add DT_NODE_BY_FIXED_PARTITION_LABEL that given a "label" in any
fixed-partitions map will return the node_id for that partition node.
Add DT_NODE_HAS_FIXED_PARTITION_LABEL that will test if a given
fixed-partitions "label" is valid.
Add DT_FIXED_PARTITION_ID that will return an unique ordinal value for
the partition give a node_id to the partition.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The macro iterates through the list of child nodes in a DT_DRV_COMPAT
instance and invokes provided macro for each node.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Several reviewers agreed that DT_HAS_NODE_STATUS_OKAY(...) was an
undesirable API for the following reasons:
- it's inconsistent with the rest of the DT_NODE_HAS_FOO names
- DT_NODE_HAS_FOO_BAR_BAZ(node) was agreed upon as a shorthand
for macros which are equivalent to
DT_NODE_HAS_FOO(node) && DT_NODE_HAS_BAR(node) &&
- DT_NODE_HAS_BAZ(node), and DT_HAS_NODE_STATUS_OKAY is an odd duck
- DT_NODE_HAS_STATUS(..., okay) was viewed as more readable anyway
- it is seen as a somewhat aesthetically challenged name
Replace all users with DT_NODE_HAS_STATUS(..., okay), which is
semantically equivalent.
This is mostly done with sed, but a few remaining cases were done by
hand, along with whitespace, docs, and comment changes. These special
cases include the Nordic SOC static assert files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The driver-specific config_info structure referenced from the device
structure is marked const. Some drivers fail to preserve that
qualifier when casting the pointer to the driver-specific structure,
violating MISRA 11.8.
Changes produced by scripts/coccinelle/const_config_info.cocci.
Some changes proposed by the script are not included because they
reveal mutation of state through the const pointer, though the
code works as long as the driver-specific object is defined without
the const qualifier.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
For HPET devices, configure it with fixed delivery mode because HPET
timer interrupt is needed to fuel the scheduler for all CPUS.
For all other type of devices, like UART, I2C, GPIO, Ethernet, etc.
configure them as lowest priority delivery mode, in which IO APIC
delivers the interrupt to the processor core that is executing at the
lowest priority among all the processors listed in the specified
destination. In this case, the device drivers can avoid the trouble of
handling repeated interrupts delivered to all CPUS.
Signed-off-by: Zide Chen <zide.chen@intel.com>
If IO APIC is in logical destination mode, local APICs compare their
logical APIC ID defined in LDR (Logical Destination Register) with
the destination code sent with the interrupt to determine whether or not
to accept the incoming interrupt.
This patch programs LDR in xAPIC mode to support IO APIC logical mode.
The local APIC ID from local APIC ID register can't be used as the
'logical APIC ID' because LAPIC ID may not be consecutive numbers hence
it makes it impossible for LDR to encode 8 IDs within 8 bits.
This patch chooses 0 for BSP, and for APs, cpu_number which is the index
to x86_cpuboot[], which ultimately assigned in z_smp_init[].
Signed-off-by: Zide Chen <zide.chen@intel.com>
Swap this out and make the status a parameter.
Leave a couple of cases of DT_NODE_HAS_COMPAT().
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Usually, we want to operate only on "available" device
nodes ("available" means "status is okay and a matching binding is
found"), but that's not true in all cases.
Sometimes we want to operate on special nodes without matching
bindings, such as those describing memory.
To handle the distinction, change various additional devicetree APIs
making it clear that they operate only on available device nodes,
adjusting gen_defines and devicetree.h implementation details
accordingly:
- emit macros for all existing nodes in gen_defines.py, regardless
of status or matching binding
- rename DT_NUM_INST to DT_NUM_INST_STATUS_OKAY
- rename DT_NODE_HAS_COMPAT to DT_NODE_HAS_COMPAT_STATUS_OKAY
- rename DT_INST_FOREACH to DT_INST_FOREACH_STATUS_OKAY
- rename DT_ANY_INST_ON_BUS to DT_ANY_INST_ON_BUS_STATUS_OKAY
- rewrite DT_HAS_NODE_STATUS_OKAY in terms of a new DT_NODE_HAS_STATUS
- resurrect DT_HAS_NODE in the form of DT_NODE_EXISTS
- remove DT_COMPAT_ON_BUS as a public API
- use the new default_prop_types edtlib parameter
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add API for recovering an I2C bus. This API can be used to recover
from situations where the I2C master and one or more I2C slaves are
out of synchronization (e.g. if the I2C master was reset in the middle
of an I2C transaction or if a noise pulse was induced on the SCL
line).
Fixes#23441.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
init_fn is not anymore part of struct device, so let's test instead the
driver's API structure pointer which is also unique per device driver.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When the device driver model got introduced, there were no concept of
SYS_INIT() which can be seen as software service. These were introduced
afterwards and reusing the device infrastructure for simplicity.
However, it meant to allocate a bit too much for something that only
required an initialization function to be called at right time.
Thus refactoring the devices structures relevantly:
- introducing struct init_entry which is a generic init end-point
- struct deviceconfig is removed and struct device owns everything now.
- SYS_INIT() generates only a struct init_entry via calling
INIT_ENTRY_DEFINE()
- DEVICE_AND_API_INIT() generates a struct device and calls
INIT_ENTRY_DEFINE()
- init objects sections are in ROM
- device objects sections are in RAM (but will end up in ROM once they
will be 'constified')
It also generate a tiny memory gain on both ROM and RAM, which is nice.
Perhaps kernel/device.c could be renamed to something more relevant.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
IS_EMPTY macro allows to check if defined name is empty, i.e.
does not contain replacement list.
LIST_DROP_EMPTY macro may be used to process __VA_ARGS__ type lists,
e.g. a,b,,c , and remove empty elements.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
By this commit USB audio class implementation is introduced
to Zephyr.
The Zephyr USB audio device class follows bellow
documentations:
- Universal Serial Bus specification rev2.0 (usb20.pdf)
- Universal Serial Bus Device Class Definition for Audio Devices
(audio10.pdf)
- Universal Serial Bus Device Class Definition for Audio Data Formats
(frmts10.pdf)
- Universal Serial Bus Device Class Definition for Terminal Types
(termt10.pdf)
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This commit adds enumeration type for isochronous
endpoints specific information required by USB Audio Class.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
INLINE is a very common macro, just like MAX or MIN.
Defining it always can easily collide with libraries or
application headers.
And option would be to add a ifdef guard around it,
But it was used in only 1 place in Zephyr, instead
of keeping it just for that, remove it.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
This commit renames the x86 Kconfig `CONFIG_{EAGER,LAZY}_FP_SHARING`
symbol to `CONFIG_{EAGER,LAZY}_FPU_SHARING`, in order to align with the
recent `CONFIG_FP_SHARING` to `CONFIG_FPU_SHARING` renaming.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit renames the Kconfig `FP_SHARING` symbol to `FPU_SHARING`,
since this symbol specifically refers to the hardware FPU sharing
support by means of FPU context preservation, and the "FP" prefix is
not fully descriptive of that; leaving room for ambiguity.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add program download (firmware update) support according to the CAN in
Automation (CiA) 302-3 draft standard proposal v4.1.0.
The implementation supports a Zephyr specific vendor command allowing
external confirmation of a newly booted firmware image. If this is not
desired, the application can confirm the image by other means.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Added special flag that can be used to indicate that optional
arguments are passed without any parsing (e.g. quotation marks
removal). Modified execute command to parse command line buffer
argument by argument.
After this change it is possible to forward whole command to
command handler (using select).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The macro iterates through the list of child nodes and invokes provided
macro for each node.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add application control of initiating phy change procedure and it's
parameters.
The reasons for allowing the application control over the PHY:
- Allow changing to Coded PHY.
- Application may change PHY to react to changes in environment
to balance throughput and range.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add application control of initiating data length procedure and it's
parameters.
The reasons for allowing the application control over the data length:
- Bandwidth control adjusted based on number of active connections.
- Changing data length before switching to coded phy.
- Applying workarounds for interoperability problems.
- Controlling order of ATT MTU and data length procedures.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The DS3231 is an I2C real-time clock with internal temperature
compensated oscillator, maintaining civil time to 1 s precision with
nominal 2 ppm accuracy from 0-40 Cel.
The basic functionality is exposed as a counter that is always running
at 1 Hz. Much more functionality is exposed as driver-specific API,
including the ability to translate between the time scale of the DS3231
and the time scale of the Zephyr uptime clock. This allows correlation
of events in the system clock to UTC, TAI, or whatever time scale is
used to maintain the DS3231.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
These helper functions may clarify how much data is available to read
from or write to the circular buffer of a k_pipe.
Fixes#25036
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
The Bluetooth 5.2 specification was recently released, and has a new
version identifier (11) assigned to it in the Bluetooth Assigned
Numbers.
Relates to commit fa241f0249 ("bluetooth: Add decoding for BLE 5.2
version string")
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add an API to transmit a continuous wave at a fixed frequency. This
functionality is useful to test the radio in a lab setup.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
Add basic driver for GIC V3 interrupt controller.
This implementation supports
- distributor, re-distributor and cpu interface initialization
- configuration and handling of SPI, PPI and SGI.
- V2 Legacy mode is not supported and uses system interface.
Current implementation supports GIC secure state only.
All interrupts are routed to Secure EL1 as 'irq' by configuring
them as Group1 Secure.
TODO:
- MPIDR based affinity routing setting.
- percpu redistributor probe
- message based SPI and SGI generation api
- EL1NS support. Legacy mode support.
- LPI/ITS is not supported.
Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
This commit introduces dedicated return type for custom_handler.
Relevant code is updated to fulfill the API documentation.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This exception allows USB Audio Class to properly respond to the
interface requests.
This commit is temporary solution and shall not be considered as
valid solution for other classes.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Port the I2S and DMIC drivers to the new timeout API so that they do
not need to enable legacy timeouts.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Code using this API to set a key to a value that is a string literal
produces errors in C++ because the passed pointer is not const
qualified, allowing the possibility that the callee modifies the
referenced string literal memory. Add the required const qualifiers
since the set function does not change the passed to it.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
