We modify the content around the Release Team formation,
and maintenance, describing in detail how maintainers
may be added to the team. Add a comment about Release
Managers that stresses that they must be members of the
team. Add details on how the TSC shall ensure a functional
release team. Add details on how the release team will
be picking release managers (cadence and selection process).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We add a section that clarifies how the project
roles may be removed. We stress that the rules
will apply to elected project roles that the TSC
may define in the future.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We need to clarify how Maintainers may become voting
TSC member, and direct this to the Charter guidelines.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add DT_NODE_BY_FIXED_PARTITION_LABEL that given a "label" in any
fixed-partitions map will return the node_id for that partition node.
Add DT_NODE_HAS_FIXED_PARTITION_LABEL that will test if a given
fixed-partitions "label" is valid.
Add DT_FIXED_PARTITION_ID that will return an unique ordinal value for
the partition give a node_id to the partition.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Several reviewers agreed that DT_HAS_NODE_STATUS_OKAY(...) was an
undesirable API for the following reasons:
- it's inconsistent with the rest of the DT_NODE_HAS_FOO names
- DT_NODE_HAS_FOO_BAR_BAZ(node) was agreed upon as a shorthand
for macros which are equivalent to
DT_NODE_HAS_FOO(node) && DT_NODE_HAS_BAR(node) &&
- DT_NODE_HAS_BAZ(node), and DT_HAS_NODE_STATUS_OKAY is an odd duck
- DT_NODE_HAS_STATUS(..., okay) was viewed as more readable anyway
- it is seen as a somewhat aesthetically challenged name
Replace all users with DT_NODE_HAS_STATUS(..., okay), which is
semantically equivalent.
This is mostly done with sed, but a few remaining cases were done by
hand, along with whitespace, docs, and comment changes. These special
cases include the Nordic SOC static assert files.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Include documentation for CVE issues that are now out of embargo. This
includes links to the CVE database, as well as referencing the PRs
within Zephyr that fix these issues.
Signed-off-by: David Brown <david.brown@linaro.org>
Add more HOWTO information for the two current devicetree-based device
instantiation styles, and a bit more information on how to create
devices that depend on others.
Point to this from the Kconfig tips page, since it is meant as a
replacement for existing Kconfig practice.
Update macros.bnf.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Usually, we want to operate only on "available" device
nodes ("available" means "status is okay and a matching binding is
found"), but that's not true in all cases.
Sometimes we want to operate on special nodes without matching
bindings, such as those describing memory.
To handle the distinction, change various additional devicetree APIs
making it clear that they operate only on available device nodes,
adjusting gen_defines and devicetree.h implementation details
accordingly:
- emit macros for all existing nodes in gen_defines.py, regardless
of status or matching binding
- rename DT_NUM_INST to DT_NUM_INST_STATUS_OKAY
- rename DT_NODE_HAS_COMPAT to DT_NODE_HAS_COMPAT_STATUS_OKAY
- rename DT_INST_FOREACH to DT_INST_FOREACH_STATUS_OKAY
- rename DT_ANY_INST_ON_BUS to DT_ANY_INST_ON_BUS_STATUS_OKAY
- rewrite DT_HAS_NODE_STATUS_OKAY in terms of a new DT_NODE_HAS_STATUS
- resurrect DT_HAS_NODE in the form of DT_NODE_EXISTS
- remove DT_COMPAT_ON_BUS as a public API
- use the new default_prop_types edtlib parameter
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
init_fn is not anymore part of struct device, so let's test instead the
driver's API structure pointer which is also unique per device driver.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
We add a note in the Zephyr v2.3.0 release notes to highlight
a renaming in the Floating Point Services main Kconfig options,
which was done in the 2.3 release cycle.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Linux distro might not have a python3-dev package installed by default,
which will give an error during Python dependencies installation.
Closes#25128.
Signed-off-by: Andrejs Cainikovs <andrejs.cainikovs@gmail.com>
This commit renames the Kconfig `FP_SHARING` symbol to `FPU_SHARING`,
since this symbol specifically refers to the hardware FPU sharing
support by means of FPU context preservation, and the "FP" prefix is
not fully descriptive of that; leaving room for ambiguity.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Added support for Qemu User Networking and tested with
qemu_x86 model. The support is kept simple assuming that
the TAP interface will always be preferred for more
sophisticated / practical use cases.
QEMU User Networking is implemented using "slirp", which
provides a full TCP/IP stack within QEMU and uses that
stack to implement a virtual NAT'd network. As this
support is built into QEMU, it can be used with any model
and requires no admin privileges on the host machine,
unlike TAP.
Added documentation to facilitate the user.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
The macro iterates through the list of child nodes and invokes provided
macro for each node.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We have a new heap implementation replacing mem_pool. Add docs on its
API and internals, and add a deprecation note to the mem_pool section.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The recent work with k_timeout_t has invalidated much of the existing
timing documentation. Rewrite the section focusing on the new API,
adding details on the internals and driver-facing API. Includes a
porting guide for legacy applications and subsystems.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add some documentation and diagrams for OS library data structures:
dlist/slist, rbtree and ring buffer.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add application control of initiating phy change procedure and it's
parameters.
The reasons for allowing the application control over the PHY:
- Allow changing to Coded PHY.
- Application may change PHY to react to changes in environment
to balance throughput and range.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add application control of initiating data length procedure and it's
parameters.
The reasons for allowing the application control over the data length:
- Bandwidth control adjusted based on number of active connections.
- Changing data length before switching to coded phy.
- Applying workarounds for interoperability problems.
- Controlling order of ATT MTU and data length procedures.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The DS3231 is an I2C real-time clock with internal temperature
compensated oscillator, maintaining civil time to 1 s precision with
nominal 2 ppm accuracy from 0-40 Cel.
The basic functionality is exposed as a counter that is always running
at 1 Hz. Much more functionality is exposed as driver-specific API,
including the ability to translate between the time scale of the DS3231
and the time scale of the Zephyr uptime clock. This allows correlation
of events in the system clock to UTC, TAI, or whatever time scale is
used to maintain the DS3231.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Various commands are getting put into their own sections when they are
really just steps along the way towards getting zephyr and installing
Python dependencies. Group them together in a section by that name,
moving the west install step there.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Strip out text that isn't needed to try to minimize the GSG's length.
Fix up some grammar nits.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Update the feature tracking page with a couple of new categories that
have been identified as missing during the Release Readiness meetings:
- Hardware support
- Meta
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Rename DT_HAS_NODE to DT_HAS_NODE_STATUS_OKAY so the semantics are
clear. As going forward DT_HAS_NODE will report if a NODE exists
regardless of its status.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This library supports stream writes to flash with
optinal progressive erase.
This module is a direct copy of the functionality found in
subsys/dfu/img_util/flash_img.c
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
The removal of mentions of 'ext' from the documentation needs an
adjustment in the Eclipse debugging page, since 'modules' is not a
subdirectory of the zephyr base directory.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Fixes: #24903
This commit now includes ${ZEPHYR_BASE}/cmake/python.cmake to locate
python3.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
We did not have any reference to queues and doxygen information were not
linked correctly. Add a placeholder and pull in doxygen data so whenever
someone adds a reference, a link is created.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Certain Qualcomm controllers do not accept our settings for Host Buffer
Size:
< HCI Command: Host Buffer Size (0x03|0x0033) plen 7 #19 [hci0]
22.391048
ACL MTU: 27 ACL max packet: 6
SCO MTU: 0 SCO max packet: 0
> HCI Event: Command Complete (0x0e) plen 4 #20 [hci0]
22.391525
Host Buffer Size (0x03|0x0033) ncmd 1
Status: Invalid HCI Command Parameters (0x12)
Likely due to the fact that we do not reserve space for any SCO packets
in the Host.
Other Controllers (Realtek) seem to not transmit any data at all in the
Controller to Host direction if Controller to Host flow control is
enabled.
Document this fact in the User Guide so that users know what to do when
this happens.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Struct members are not always documented in the zephyr online HTML
documentation. Enable it for all Bluetooth related documentation
groups.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add information on security vulnerabilities fixed in this release.
These CVEs are under embargo, and vulnerabilities page will be updated
when the embargo ends.
Signed-off-by: David Brown <david.brown@linaro.org>
Add debug configuration to easily enable logging through RTT. Required
to use RTT since the UART is otherwise used for the h4 UART driver.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit renames the Kconfig `FLOAT` symbol to `FPU`, since this
symbol only indicates that the hardware Floating Point Unit (FPU) is
used and does not imply and/or indicate the general availability of
toolchain-level floating point support (i.e. this symbol is not
selected when building for an FPU-less platform that supports floating
point operations through the toolchain-provided software floating point
library).
Moreover, given that the symbol that indicates the availability of FPU
is named `CPU_HAS_FPU`, it only makes sense to use "FPU" in the name of
the symbol that enables the FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The NET_DEVICE_INIT(), NET_DEVICE_INIT_INSTANCE() and
ETH_NET_DEVICE_INIT() macros changed and take new device power
management function pointer parameter.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This documentation is well-intentioned but not good advice.
The reason why we have a vtable-like API abstraction at the
driver subsystem level is to introduce object orientation.
The subsystem defintions implement an abstract class that
specific driver implementations all implement, providing
a common interface for end users. Multiple drivers may be
written for a subsystem that are interchangeable to the end
user.
However, there is no point in introducing a vtable-like
abstraction for APIs which are specific to a single driver.
We are not trying to present an interface abstraction which
could support multiple implementations. There is just one.
Simply declare a function in a header, and implement it in
the driver's C file.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Rename internal macros to use Z_ prefix instead of _K..
Those macros were missed when we did the global renaming activities.
Fixes#24645
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
