Refactor and simplify the bluetooth buffer configurations to improve the
easy of configurations and eliminate invalid ones.
By moving configurations out of host and controller specific
configurations and into a common one it becomes easier to configure
the host and controller separately as the same configurations can be
used as would be for a combined build.
All HCI configurations are now given exluding the matching HCI header,
which eases the configuration as the application don't have to know the
different header sizes.
The BT_RX_BUF_LEN is split into ACL and Event, as well as the suprising
use of Command size.
BT_L2CAP_RX_MTU is removed as the stack does not support reassembling of
HCI ACL data to larger L2CAP PDUs. The application will have to set
ACL RX size and account for the L2CAP PDU header itself.
BT_EATT_RX_MTU was removed as it is only used for setting a different
default value for another option which leads to the stuck kconfig symbol
problem.
The configurations can be updated according to the table below:
** New configuration | ** Old configuration
All configurations
BT_BUF_ACL_RX_SIZE | BT_L2CAP_RX_MTU + 4
BT_BUF_ACL_RX_SIZE | BT_RX_BUF_LEN - 4
BT_BUF_EVT_RX_SIZE | BT_RX_BUF_LEN - 2
BT_BUF_CMD_TX_SIZE | BT_RX_BUF_LEN - 3
BT_BUF_CMD_TX_COUNT | BT_HCI_CMD_COUNT
BT_BUF_EVT_RX_COUNT | BT_RX_BUF_COUNT
BT_BUF_ACL_RX_COUNT | BT_RX_BUF_COUNT
BT_BUF_ACL_RX_COUNT | BT_ACL_RX_COUNT
BT_BUF_EVT_DISCARDABLE_SIZE | BT_DISCARDABLE_BUF_SIZE - 2
BT_BUF_EVT_DISCARDABLE_COUNT | BT_DISCARDABLE_BUF_COUNT
Controller-build
BT_BUF_ACL_TX_SIZE | BT_CTLR_TX_BUFFERS_SIZE
BT_BUF_ACL_TX_COUNT | BT_CTLR_TX_BUFFER
HCI-bridge
BT_BUF_ACL_TX_SIZE | BT_HCI_ACL_DATA_SIZE
BT_BUF_ACL_TX_COUNT | 6
Fixed invalid configurations setting either BT_L2CAP_RX_MTU or
BT_CTLR_DATA_LENGTH_MAX larger than BT_RX_BUF_LEN could lead to buffer
overruns.
Fix advertising report max data length calculation.
This always used the BT_DISCARDABLE_BUF_SIZE macro but this feature
can be turned off and advertising reports will be allocated from the RX
buffer in that case. Also controller-build does not have this buffer
(in hci_raw.c). Also the wrong HCI header was used in the calculation,
HCI event header should have been used instead of HCI ACL header.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Use `pm_device_*` prefix for the device runtime PM API. This adds the
API to the `pm` namespace, making it clear part of the PM subsystem.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Get the correct flash device from the storage partition node.
The current code is relying on the invalid assumption that the
chosen zephyr,flash-controller node is the device which contains
the storage partition.
Reported-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Replace device_get_binding with DEVICE_DT_GET(). Fix and clean up
error handling and debug printing during initialization.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use the new GPIO_DT_SPEC_GET_OR() macro to clean up the node detection
code by eliminating conditional compilation. This increases code
coverage on platforms where not all the devicetree nodes are
available.
Clean up some whitespace while we're at it.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Adds mimxrt1060_evk and mimxrt1064_evk boards to the platform_allow list
for the smp_svr sample application.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
In this example, python test case get the running directory by handling
the "--cmdopt" option passed by pytest.
Signed-off-by: YouhuaX Zhu <youhuax.zhu@intel.com>
The cbprintf packaging needs CONFIG_CBPRINTF_PACKAGE_LONGDOUBLE
to be enabled to work with long double. So #ifdef that inside
CONFIG_FPU.
Also add to the sample.yaml to enable testing with FPU and
long doubles.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Allow SMP processing for SOF on ADSP. Note, that after this
SOF will build with SMP support enabled on all cAVS versions,
but secondary cores will remain disabled unless an SMP
topology is loaded by the host.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reboot functionality has nothing to do with PM, so move it out to the
subsys/os folder.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This adds a sample application on dictionary-based logging.
The README file includes instruction on how to run the log parser
to generate human readable log messages.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When building and running the rpmsg_service sample on MPS2 AN521
use the mps2_an521_remote target to build the Zephyr image
for the remote core.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When building and running the openamp sample on MPS2 AN521,
use the mps2_an521_remote target to build the Zephyr image
for the remote core.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Uninitialization of uart transport was missing disabling of TX
interrupt. It had to be done by the user before using uart.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Removing CONFIG_TRACING_CPU_STATS in favor of
CONFIG_THREAD_RUNTIME_STATS which provides per thread stats. The same
functionality is also available when Thread analyzer is enabled with the
runtime stats enabled.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Limit adafruit_2_8_tft_touch_v2 sample variant execution to the boards
that have this shield available.
In order to run the test in CI bench, add the following in
twister map.yml file on matching board:
fixtures:
- fixture_shield_adafruit_2_8_tft_touch_v2
For instance:
- connected: true
fixtures:
- fixture_shield_adafruit_2_8_tft_touch_v2
id: 0673FF323535474B43171415
platform: nucleo_f429zi
product: STM32 STLink
runner: openocd
serial: /dev/ttyACM0
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Adds a new sample configuration to build the fat_fs sample with the
adafruit_2_8_tft_touch_v2 shield and SDMMC SPI driver in CI. It has been
tested with frdm_k64f and mimxrt685_evk_cm33 boards, but should work
with any board that supports Arduino SPI and Arduino GPIO features.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This functions is being called across the tree, no reason why it should
not be a public API.
The current usage violates a few MISRA rules.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Several platforms don't have flash drivers and these platforms the DFU
sample will not build or even pass Kconfig on. Exclude them until they
have flash driver support.
Fixes#33422
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we can use the adafruit_2_8_tft_touch_v2 shield with
mimxrt685_evk_cm33 and frdm_k64f boards, start building the display
driver and lvgl samples for these boards in CI.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
shell_uart_release command shows how shell can be uninitialized and
release transport resources (uart) and reinitialized at runtime.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Using the new obscured user shell input feature,
provide examples of using it in login and logout commands.
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
This patch removes sdhc_api references since such API
does not actually exist. SD card controller drivers
use disc driver interface. Accordingly, the SDHC documentation,
which actually describes how to connect a SD card via SPI
and has little to do with SD host controller (SDHC),
is also moved to disk access page and adapted.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Zephyr already has a directory for storage API relevant headers.
Move disk_access.h header to include/storage where it fits better
structurally.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
