Fix amp to milliamp conversion where a 10^4 factor was applied instead
of 10^3.
Adjust existing test cases accordingly (including a small change to one
of the expected RMS values in pm.power_states that either changed
since the test was introduced or was set too aggressively back then).
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Based on a discussion around P4WQ limitations for our application, it
was determined that the RTIO workqueue required the ability to use
additional threads from the pool in spite of work items blocked.
Since this is not covered, nor desired for the P4WQ, then remove this
dependency and re-implement it in a way that covers also this use-case.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Processed on separate worker threads. This test is expected to fail
as the P4WQ limits the number of active items assigned to worker
threads to the number of CPU cores the system has.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Fix a bug in zbus_chan_rm_obs() where removing the first observer in a
channel's observer list would cause undefined behavior due to accessing
a member of a NULL pointer.
The issue occurred when prev_obs_nd was NULL (indicating the first node
in the list) and the code attempted to pass &prev_obs_nd->node to
sys_slist_remove(). This resulted in accessing the 'node' member of a
NULL pointer, which is undefined behavior even when taking its address.
The sys_slist_remove() function is designed to handle a NULL prev_node
parameter correctly for removing the first element in a list. The fix
ensures we pass NULL directly instead of attempting to compute the
address of a member within a NULL pointer.
This was detected by Undefined Behavior Sanitizer as "member access
within null pointer".
Signed-off-by: Jan Tore Guggedal <jantore.guggedal@nordicsemi.no>
Extends support and adds new overlays.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
Do not use qemu_cortex_m3 for the "build all" case, as it overflows and
provides no benefit over native_sim. Add native_sim/native/64 platform
to the tests.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The qemu_rx some how with too big offset in "mov" instruction
cannot manipulate the memory correctly
This commit reconfigure the slot count to reduce the size of
psa_global_data_t struct so that issue on qemu_rx not occur
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
Somehow icount shift making this test fail on qemu_rx target
maybe clock rate on RX is too low, as work around I disable
the icount shift for this test case on qemu_rx
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
Fixes these files to no longer delete non-secure partitions as
they are not present, and updates the offset of the area to use
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
- Added a CPU load callback with threshold
- Changed cpu_load to use k_timer instead of k_work
Signed-off-by: Kristoffer Rist Skøien <kristoffer.skoien@nordicsemi.no>
Native sim was inadvertently forgotten from the platform_allow list with
commit 257e56c.
It should be in there as it is an integration platform.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
- Adds NXP platforms for the filesystem.fat.ram.api test case.
- Renames prj_native_ram.conf to prj_ram.conf,
as it can be used by all platforms.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
This commit makes the Radio workqueue priority configurable by the
application. Additionally, the default priority has been adjusted to
allow transmit operations to occur before the entire RX queue is
processed.
Signed-off-by: Łukasz Duda <lukasz.duda@nordicsemi.no>
Add an overlay in the GDB stub test for ESP-WROVER-KIT board
to enable using its UART for remote GDB communication.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The mode is activated by the CONFIG_MODBUS_NONCOMPLIANT_SERIAL_MODE option
and allows any stop-bit setting for the serial port.
Signed-off-by: Maksim Salau <msalau@iotecha.com>
Some applications require loading extensions into the memory which does
not exist during the boot time and cannot be allocated statically. Make
the application responsible for LLEXT heap allocation. Do not allocate
LLEXT heap statically.
Signed-off-by: Alex Ivanov <alexivanov@google.com>
During testing and code inspection, there were various anti-patterns
on this (and U-Blox driver) codebase(s), including obfuscation, and
lack of data validation. This made it increasingly difficult to
introduce further variants of u-blox GNSS modems.
With this patch, both the UBX modem and the M8 driver have been
refactored to ease the reliability and maintainability of these
codebases. Here are some highlights:
WRT UBX modem:
- Helper macros to easily create UBX frames, (including checksum
calculation), at compile time; thus, making it easier to extend UBX
commands.
- Logic validation by the inclusion of the modem_ubx testsuite, used to
refactor the code through TDD.
- Ability to receive unsolicited messages, in order to enable U-Blox
drivers to rely on modem_ubx to transceive all commands, and avoid
hopping between modem_ubx and modem_chat.
WRT M8 driver:
- Remove GNSS specific protocol header files. Instead, unify them under
modem/ubx/protocol.h. Background: After a survey and looking at ubxlib
SDK I conclude the UBX protocol is by definition a GNSS protocol (there
are non-GNSS u-blox modems, but they're not interfaced through UBX
protocol).
- Establish pattern to create and send/receive commands using new
foundations on modem ubx.
- Remove dependency of Modem chat, and instead use UBX unsolicited
messages to get Navigation and Satellites data.
- Switch from the auto-baudrate detection pattern to a pattern of
transitioning between an initial known baudrate to a desired baudrate,
in order to improve initialization time.
- Add dts property to configure default fix-rate.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Add new Kconfig options to enable platform-specific features in
OpenThread:
- CONFIG_OPENTHREAD_PLATFORM_PKT_TXTIME enables support for packet TX
time when CONFIG_NET_PKT_TXTIME is selected.
- CONFIG_OPENTHREAD_PLATFORM_CARRIER_FUNCTIONS enables modulated and
continuous carrier functions when CONFIG_OPENTHREAD_DIAG and
CONFIG_IEEE802154_CARRIER_FUNCTIONS are enabled.
Update preprocessor conditionals to use the new options instead of
relying directly on CONFIG_NET_PKT_TXTIME and
CONFIG_IEEE802154_CARRIER_FUNCTIONS.
This change improves configurability and allows to reuse the platform
implementation when not using Zephyr networking.
Signed-off-by: Adrian Gielniewski <adrian.gielniewski@nordicsemi.no>
When CONFIG_ZTEST_ASSERT_VERBOS is 0, syst_headers_name[] is
not exactly being used by zassert_mem_equal(). Mark it as
__maybe_unused to avoid compiler warnings.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The commit modifies the Flash Map test, providing Kconfigs that
allow to opt out from testing disabled partitions and testing
DTS node access.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This commit enables power_mgmt_soc test for MAX32655 boards
- max32655evkit
- max32655fthr
RTC clocked in most low power modes so that this timer
is linked with idle timer. By this way device able to wakeup
from low power modes.
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
This commit enables power_mgmt_soc test for MAX32690 board
Low power timer is used as idle timer that will wakeup device
from sleep modes. Lowpower timer clocked with RTC clock which
always on.
RTC can be used as idle clock timer too, in that case below
line need to be added in overlay file
/ {
chosen {
zephyr,cortex-m-idle-timer = &rtc;
};
};
&rtc {
status = okay;
wakeup-source;
};
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Some ITS store module implementations may make use of them.
This is the case of the custom one in the
secure_storage.psa.its.secure_storage.custom.store test.
Instead of making transform.h conditionally available, move the definitions
to common.h and simply make them available whenever the ITS transform
module is enabled.
At the same time, remove unneeded/redundant includes/build asserts.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Async now uses its own work queue, which means it consumes more
resources. Since not all applications need the async API, we can make
it optional without any penalty for those applications.
Signed-off-by: Flavio Ceolin <flavio@hubblenetwork.com>
Device runtime is using the system workqueue to do operations
that are mostly blockers (suspend a device). This should not happen.
This commit adds an option to use dedicated queue for the device runtime
async operations.
The test for this API was assuming that the system workqueue
priority (which is cooperative) so we need to change the test priority
to be lower than the device runtime workqueue priority.
Signed-off-by: Flavio Ceolin <flavio@hubblenetwork.com>
After introducing compile time argument validation of strings
used in zassert macros multiple warnings appear. Fix all of
them.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
JWT test fails on max32657evkit/max32657/ns board, due to
it requries hardware TRNG on TF-M side which not activated
yet until it's issue been fixed it is excluded from automated
test to workflow been succeeded
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
