The native_sim has already been added to the test cases of
`drivers.ieee802154.build.external` is not being appropriately
processed because there is no corresponding overlay.
Create an overlay as an alias of native_posix.overlay.
Also, add the native_sim/native/64 platforms in the same way.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
The mcr20a driver referencing `MCR20Overwrites.h` which is under
`hal/nxp/mcux`.
So, put `depends HAS_MCUX` for clarify the dependency.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
When building with native_sim, We need to specify
```
#define _POSIX_C_SOURCE 200809L
```
to make `gmtime_r` available.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
After rebasing the PR on main, the local copy of the repository may
still contain untracked directories and files (for example, the commits
from the pull request are "git mv"ing files out of directories that are
then left empty). Add a git clean so that we run CI in conditions
that are as close as possible to a fresh clone.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
When an incoming PAN ID does not match or when an error occurs while
sending association requests, then locks were not properly released.
Fixes: #78495
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
gpio_basic_api test configuration drivers.gpio.2pin_arduino expects
arduino pins D2 and D3 to be available but they aren't declared in
arduino connectors for this board as not available by default.
Remove arduino_gpio compatibility declaration for now.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Since the mkbox board ble f/w upgrade method based on binary
blobs that was proposed in #74255 has been turned down, all
the work done in hal_stm32 module to host blobs is now reverted.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Added new Kconfigs for defining permission level of GATT
characteristics that are part of the Bluetooth SMP service in the
MCUmgr subsys.
Removed the CONFIG_MCUMGR_TRANSPORT_BT_AUTHEN as the new Kconfig
options are mutually exclusive and need to be groupa as the Kconfig
choice option.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Let's run tests with security/privacy with the HW models acutually
running the encryptions, so in case of missaligned keys
tests fail.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's run tests with security/privacy with the HW models acutually
running the encryptions, so in case of missaligned keys
tests fail.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's run tests with security/privacy with the HW models acutually
running the encryption, so in case of missaligned keys
tests fail.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's run tests with security/privacy with the HW models acutually
running the encryptions, so in case of missaligned keys
tests fail.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Removed the experimental status from the BT_BONDABLE_PER_CONNECTION
Kconfig option used in the Bluetooth Host SMP layer. This feature
has been present in Zephyr for over a year without any issue reports
or API modifications.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Add the "kernel_shell.h" header which is required but missing,
causing build error.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
This commit re-enables the following platforms for the
`kernel.common.stack_sentinel` test:
* `hifive1`
* `m2gl025_miv`
These platforms working correctly after Renode was upgraded to 1.15.2 in
the CI.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Add new script `pack_as_twister.py` to convert memory footprint
data prepared by `./footprint/scripts/track.py` into JSON files
compatible with Twister report schema. Next, the data can be
transformed and uploaded to ElasticSearch data storage the same
way as memory footprint (and other) reports executed by Twister.
Add to `plan.txt` an optional column with the corresponding
test suite names for 'footprints' as an example for test instance
name composing with `--test-name` command argumnent.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
The STM32 M4 Clicker is a basic development board for the ST STM32F415RG
Microcontroller. The board contains two LEDs and push buttons and several
headers for interfacing with external devices.
Signed-off-by: Ian Morris <ian.d.morris@outlook.com>
- Fixed the MX25UM51245G flash DTS write block size from 16 to a value
used by the flash_mcux_flexspi_mx25um51345g driver.
- Fixed flash partitions.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
Add a section to the docs ellaborating on the relationship between
Zephyr, the native simulator, the nRF HW models and BabbleSim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In case peer goes down or we disconnect from the network during the
TLS handshake, the TLS socket may block indefinitely during
connect()/accept(), waiting for data from the peer. This should be
avoided, hence use the preconfigured timeout for the TLS handshake,
same as we use for TCP-level handshake.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
cavs15, cavs18 and cavs20 were removed from Zephyr there is no
need to handle those platforms in the tool.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Fixes the mailbox notification callback that was not
being called from the ISR when the other side sends
something.
Signed-off-by: Felipe Neves <ryukokki.felipe@gmail.com>
Add the missing #ifndef CONFIG_ZTEST_SHUFFLE in ztest.c file.
This fixes multiple definitions of NUM_ITER_PER_SUITE
and NUM_ITER_PER_TEST.
Signed-off-by: Arkadiusz Cholewinski <arkadiuszx.cholewinski@intel.com>
This fixes the following warning:
> unit address and first address in 'reg' (0x1a0000000000000000) don't
> match for /soc/peripheral@50000000/i3c@36000/wm8904@1a
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This fixes the following warning:
> unit address and first address in 'reg' (0x1a0000000000000000) don't
> match for /soc/peripheral@50000000/i3c@36000/wm8904@1a
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Ethernet board variant was missed in commit 138e9591f8 (tests: net:
wifi: exclude RW612 based boards), but is the sole variant that actually
was running this test. Exclude this variant only, since it cannot build
this test due to requiring binary blobs.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This small change concerns the following filter functions:
1. `dt_compat_enabled(C)`:
There's a node with compatible `C` and status "okay".
2. `dt_enabled_alias_with_parent_compat(A, C)`:
There's a node with alias `A` and status "okay", and its parent
has compatible `C`.
3. `dt_label_with_parent_compat_enabled(L, C)`:
There's a node with label `L`, and its parent has compatible `C`
and status "okay".
All three functions involve checking whether some node or its parent has
a given compatible, but the way this has been checked is inconsistent.
Function (1) has done it with this Python conditional:
compat in node.compats
while (2) and (3) have used:
parent.matching_compat == compat
The first check works well with nodes that have multiple compatibles,
and it is more aligned with the notion of "has_compat" as seen in the
devicetree macros for C, CMake, and Kconfig.
Arguably, `matching_compat` shouldn't have been used here, because it is
actually a property of a node's binding, moreso than of the node itself.
In practice, it's usually equal to the first compatible for which edtlib
has found a binding, which at first glance is just more constrained than
the `node.compats` check. However, there also exist obscure cases where
the `node.compats` are empty, while the `node.matching_compat` is not.
For now, the three functions can use a combined check, to improve
consistency and utility while avoiding breakage:
node.matching_compat == compat or compat in node.compats
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
It has been deprecated since Zephyr v2.6.0.
The filter that replaced it - `dt_enabled_alias_with_parent_compat` -
had shared code with it, which can now be inlined into `ast_expr()` to
match the parser's overall code structure.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
DVFS medlow oppoint should use trim entry index 2,
this needs to be updated in hal/hal_nordic.
Currently this is not possible because of time
constraints that is why this temporary patch
is applied. This is the only point where
new_f_trim_entry is used.
Signed-off-by: Lukasz Stepnicki <lukasz.stepnicki@nordicsemi.no>
This adds a dt overlay to enable support of cc1352p7 lp
to the openthread coprocessor sample application.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Some examples may require the usage of a second UART.
This adds UART1 to common launchxl.dtsi in order to make it
available for these examples.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Sometime, the radio causes a bus error.
This happens because we cast a struct and access to a member
that doesn't exists in the original struct.
This updates the driver to use the right struct to make the cast safe.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Currently, if we try to write data from a memory mapped flash address
to the flash then we get a -EINVAL error.
This could break the settings subsystem when we use NVS backend.
In order to make it work, add a buffer and use it when we want to
write data that is located in flash address space.
This has been tested using sample/subsys/settings/
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
- Improved document structure (was *very* flat before) by adding more
meaningful top-level headings and re-ordering some of the existing
sections
- Provide detailed and structured docs for all the custom Sphinx roles
and directives available in Zephyr, including moving the docs for
``.. zephyr-app-commands`` directive and `:dtcompatible:` roles away
from the extensions' source files to align with how Sphinx typically
handles docs for custom roles/directives.
- Added more content regarding diagrams guidelines, images,
cross-referencing of Doxygen documentation, ...
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Increase navigation depth by 1 to enable "local" toc navigation in the
side bar for those pages that are deeper in the documentation tree.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Rather than testing each bit until the lowest set bit is found, we can
massage the input parameter to easily clear all bits except the lowest
set bit. When only one bit is set, both find_lsb_set() and find_msb_set()
return the same value.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
