1. kenistis dspi does support rx and tx with different size,
so skip the tx_bigger test.
2. dspi dma need internal alignment and 8192 bytes are too
many for k64, so reduce to 1440 bytes
fixing: #77010
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Define DMA channels for MAX32 boards and add a new test case so that
DMA-based SPI transfers are tested.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
Connect D12(PA6) & D22(PB5) pins on the board to pass the test.
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
Reviewed-by: Vasilij Strassheim <vasilij.strassheim@linutronix.de>
The board is capable to serve SPI on the Arduino extention header.
Configure and enable SPI to work on the extention.
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
The nucleo_h7X3zi overlays use memory attributes and therfore the
dedicated include file. This is unnessesary, since the memory attribute
include is already included from the underlaying CPU base file
"stm32h7.dtsi". Remove the unnessesary includes.
Signed-off-by: Benedikt Spranger <b.spranger@linutronix.de>
pwm: pwm_api: update testcase.yaml and add new overlay configuration
to support flexio pwm driver.
spi: spi_loopback: update testcase.yaml and add new overlay
configuration to support flexio spi driver.
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
SPI pins are defined in board.dts file to simplify usage
so that no need to redefine it in overlay files
Signed-off-by: Sadik Ozer <sadik.ozer@analog.com>
Enable SPI test for MAX32662EVKIT.
SRAM size increased to get enough space for SPI test image
Co-Authored-By: Sadik Ozer <sadik.ozer@analog.com>
Signed-off-by: Furkan Akkiz <hasanfurkan.akkiz@analog.com>
Add MAX32655FTHR and MAX32655EVKIT board configuration for SPI loopback
test. Supports interrupt and asynchronous transfers as well as 16-bit
frames.
Co-Authored-By: Sadik Ozer <sadik.ozer@analog.com>
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
Add spi configurations of NXP frdm_ke17z and frdm_ke17z512 boards,
tested spi_loopback sample for lpspi drivers.
Update the "HAS_MCUX_*" kconfig to "DT_HAS_*" in testcase.yaml
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
This overlay is no longer needed, as presently there are more test
scenarios covering all combinations of DMA and SPY_ASYNC support for
LPSPI peripheral.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Add more memory to dma region for cpurad as otherwise it fails
during initialization due to not enough memory for dmm heap.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
The board didn't have a proper overlay for the test and failed to build
the test case causing CI failures.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
`checkpatch.pl` requires that dts sources are indented with tabs,
fix all the spaces that slipped in while checkpatch wasn't watching.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Reduce the spi1 clock freq to pass the testcase on the nucleo
_h753zi or nucleo_h743zi boards
Connect D11 & D12 pins on the board to pass the test
Signed-off-by: Francois Ramu <francois.ramu@st.com>
A collection of simple enablements to match some of the enablement
done for rd_rw612_bga as closely as possible on the frdm_rw612 board.
- i2c
- spi
- dma
- mrt
- ctimer
- os timer
- dac
- adc
- trng (alread was enabled but now listed support)
- watchdog
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
In test cases checking async API, use async API
for both controller and peripheral devices.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Add possibility to test all four SPI modes (CPOL, CPHA).
Add possibility to test different bitrates.
Add tests that checks handling of zero length buffers on master.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Add overlay file for nrf54h20.
Align code and DTS between spi_error_cases and spi_controller_peripheral.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Display diff of contents for large buffers is not quite helpful and
takes up huge RAM, and if a board has less RAM then this causes the test
module build failures.
So, disable display of diff and just log a failure, small buffer tests
can be used to debug such basic issues and large buffer tests can act as
a smoke test for debugging other issues. This saves about 80K of RAM.
Fixes#72792.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
There are several esp32-based boards that its conf and overlay
files are missing proper renaming to match cpu cluster.
This also removes all _SOC_ name from files.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Add test which is using one SPI master and one SPI slave instance.
There is already a loopback test for SPI master so this test is
focusing on SPI slave API. Test requires 4 pairs of GPIO pins
shortened together. One set of pins is used by SPI master and
one for SPI slave.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Adjustments of overlay and conf files to adjust for the MERGE removal.
The revert of MERGE requires specific overlay and conf files for boards
which relied on the MERGE feature.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
