Add pwm configuration for frdm_ke17z and frdm_ke17z512 boards.
Set the alias of pwm-0 to ftm2 and test the pwm_api sample.
Update the ftm and pwt configuration to test pwm_loopback sample.
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
Add support for Nuvoton numaker board numaker_m2l31ki.
m2l31x has 4 MPU regions and can't afford one more region
for TEST_USERSPACE, so set CONFIG_TEST_USERSPACE=n.
Signed-off-by: cyliang tw <cyliang@nuvoton.com>
There are several esp32-based boards that its conf and overlay
files are missing proper renaming to match cpu cluster.
This also removes all _SOC_ name from files.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
FTM internal counter can be clocked by one of three clock sources
independent of the module bus clock. This patch introduces a DT property
to perform the clock selection from DT.
DT sources are updated to keep the current clock selection for all boards,
with exception of ucans32k1sic board which is migrated to use system
clock by default, as this seems to be a better choice for most cases.
Some PWM LED samples require slower clock so overlays are added for
those cases.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Adjustments of overlay and conf files to adjust for the MERGE removal.
The revert of MERGE requires specific overlay and conf files for boards
which relied on the MERGE feature.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add internal loopback for testing purposes and
change wroom for wrover, which is default board
for testing.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
At least one of this test cases in pwm_capture needs to verify
the working of four-channel-capture-support.
Signed-off-by: Hein Wessels <heinwessels93@gmail.com>
Add `yd_esp32` board:
- Model name: YD-ESP32
- Manufacturer: VCC-GND® Studio
- Espressif module: ESP32-WROOM-32E
Signed-off-by: Julio Cesar <hi@jcsx.dev>
Remove virtual esp32 board and replace it with the
real word boards:
- esp32_devkitc_wroom
- esp32_devkitc_wrover (with PSRAM option)
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add the overlay to run the pwm_loopback testcase on the
stm32h573i_dk platform.
Connect D3 (pin 4 of CN15) to D10 (pin 3 of CN13) to pass the test
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add Nucleo F103RB overlay to the PWM loopback test to check that the newly
introduced PWM inputs are functional.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add overlay for esp_wrover_kit
Use default values for test_continuous_capture
Add test case for esp32 platform
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
In order to be consistent with what is possible in Devicetree, always
take a period in nanoseconds. Other scales or units may be specified by
using, e.g., the PWM_MSEC() macros (all of them converting down to
nanoseconds). This change then deletes the "_nsec" and "_usec" versions
of the pwm_set call.
Note that this change limits the period to UINT32_MAX nanoseconds,
~4.3s. PWM is, in generali, used with periods below the second so it
should not be a problem.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
PA1 is connected to ethernet RMII Reference Clock signal
and it impacts the TIMER signal.
Change to PA3 on Arduino A0 connector
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
There shall be no special case for inverted PWM pulse when checking
if the captured value is correct.
The output signal inversion is done in HW (at least for stm32h7xx)
SoC. The measured value of the pulse shall be the same - no matter
if we invert the signal or not (as measuring also takes into account
the inversion of the output/input signal).
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Without this change the information about PWM polarity is lost when
flags are passed, as the out.flags is set according to PWM description
in the DTS.
For example in: pwms = <&pwm2 2 0 PWM_POLARITY_NORMAL> the out.flags
is always set to PWM_POLARITY_NORMAL.
However, some tests - like 'test_pulse_capture_inverted' require testing
if PWM driver is able to invert the generated signal.
After this change, the generated waveform (from the TIMx pin) is
inverted.
Tested on: Nucleo 'nucleo_h743zi' board (TIM2 ch2 -> out, TIM5 ch1 <- in)
Signed-off-by: Lukasz Majewski <lukma@denx.de>
This commit allows testing the PWM (timers) on the
nucleo_h743zi development board.
The HW setup for testing:
Timer2 (channel 2) as PWM signal generator -> CN11 connector
(PIN 30)
Timer5 (channel1) in Capture mode to measure the pulse
duration -> CN11 connector (PIN28)
Such setup allows easy HW loopback connection (just short cut two
consecutive pins/soldering vias on the devel board's PCB).
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Add the pinctrl state name (default) for the PWM peripherals.
Changes performed based on the script proposed in
"boards: arm: stm32: add pinctrl state name for UART peripheral"
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add overlay file for disco_l475_iot1 board to pwm_loopback test.
The file is based on the existing overlays for twr_ke18f and frdm_k64f.
The new configuration uses both a 16-Bit timer with active prescaler
as well as a 32-Bit timer with deactivated prescaler for coverage.
It is assumed that other STM32 boards will behave like the
disco_l475_iot1. Only this board was available for testing.
Signed-off-by: Tilmann Unte <unte@es-augsburg.de>
Adds a new zassert to check whether PWM capture has previously been
enabled and correctly returns -EBUSY on a second call.
While working on #39694 this was found to be a missing test case.
The new test case has been verified against the suggested changes of
that PR.
Signed-off-by: Tilmann Unte <unte@es-augsburg.de>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This is now failing an edtlib check for unknown vendor prefixes.
I can't find a reason to use a vendor prefix in application-local
bindings like this, so just remove it wherever it appears by
normalizing to test-foo-compat instead of test,foo_compat or
test,foo-compat.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add pinctrl-0 properties for configuration of UART, I2C, SPI, FTM,
DAC, ADC, ACMP, and PWT peripherals. These settings are based on what
is defined in the board/pinmux.c file.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Fix#32918 [Coverity CID :219528] "Arguments in wrong order
in tests/drivers/pwm/pwm_loopback/src/main.c"
Signed-off-by: Guðni Már Gilbert <gudni.m.g@gmail.com>
Add support for testing the NXP Kinetis Pulse Width Timer (PWT) on the
NXP TWR-KE18F development board using PWM loopback.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
