This reverts commit 331442f059.
Change was introduced because it was failing on slow core
(nrf54h20/cpuppr) however it turned out that there was a bug in the
driver and now test passes without this tweak which make the test
last twice longer.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Move samples config files from 'boards' to 'socs' in order to
remove multiple files with the same configuration and render
available samples for new boards. Only changed sample files
which are not board or hardware specific.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Increase the counter timer prescaler for some instances of NXP System
Timer Module, so that late alarms and short relative alarms are
excercised.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Convert NXP System Timer Module driver to a native driver.
Timer prescaler in tests is updated because short relative alarms
sometimes give false positives.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Rework configuration so that it does not require special treatment
in testcase.yaml.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Rework configuration so that it does not require special treatment
in testcase.yaml.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
`checkpatch.pl` requires that dts sources are indented with tabs,
fix all the spaces that slipped in while checkpatch wasn't watching.
Signed-off-by: Jordan Yates <jordan@embeint.com>
When running this test with multiple counter instances enabled that
support different capabilities, if one of the instances does not
support the test required capabilities, the test will be
immediately skipped not giving the chance to run to the subsequent
instances.
Fix this by marking the test as skipped, only of all counter instances
under test were skipped.
Fixes#74358
Signed-off-by: Manuel Argüelles <marguelles.dev@gmail.com>
This commit adds a missing #ifdef check which prevents building the
'counter_basic_api' test for boards under the following conditions:
* RTC node is defined in device tree (compatible = "st,stm32-rtc")
* RTC node is disabled in device tree (status = "disabled")
* Kconfig "CONFIG_COUNTER_RTC_STM32=n" is specified
This check matches the ones done a few lines above for NXP MCUs.
Without this check, building the test under the conditions listed above
failed with the infamous `undefined reference to '__device_dts_ord_N'`
linker error, because the test attempts to obtain RTC's `struct device`
despite CONFIG_COUNTER_RTC_STM32=n, which ultimately fails because the
RTC driver is not built unless there is an enabled RTC node in DT.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Add google_dragonclaw board definition and allow running the
drivers.counter.basic_api.stm32_subsec test on the board.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Rename all Silicon Labs dev kits to always use the official kit name
as board target name. Previous kit names used various naming schemes,
including putting part of the SoC name in the board name. With HWMv2,
SoC names (if needed) should go in the SoC board qualifier.
Use HWMv2 revisions for the two variants of SLTB010A.
Split the xG27 Dev Kit from the EFR32BG22 Thunderboard. This attempt
at deduplication is confusing due to the very different kit names
and use of different ICs (BG22 vs BG27), and was not continued with
the xG24 Dev Kit, meaning that it wasn't consistent.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
For slow processors it is possible that setting 1 ms alarm and
then canceling it could lead to alarm expiring before it is canceled
and that was not expected in the test. Increasing timeout to 1.5ms.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
These tests run fine in this board, let's provide an
overlay and enable them.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
There are several esp32-based boards that its conf and overlay
files are missing proper renaming to match cpu cluster.
This also removes all _SOC_ name from files.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Add overlay for nrf52_bsim to the fixed_top test.
For bsim board RTC register address has to be translated.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Adjustments of overlay and conf files to adjust for the MERGE removal.
The revert of MERGE requires specific overlay and conf files for boards
which relied on the MERGE feature.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
imxrt6xx are dual core devices featuring an ARM Cortex-M33
core and an Cadence Xtensa HIFI4 Audio DSP.
Currently only m33 core is supported. In order to support
the Cadence DSP we need first to do some code-reorganization
for m33.
We start by moving all cm33 related code to its own directory
and introduce the cpuclusters property in soc.yml file.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Enable CTimer0 and MRT0 channel 0 by default on the board,
and add more of the device instances in the counter api test overlay.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Fix board identifier in overlays for the lpcxpresso55s69_cpu0 target.
Board identifiers were renamed with the following command:
for file in $(find . -name "lpcxpresso55s69_cpu0.*"); do;
mv $file ${file/_cpu0/_lpc55s69_cpu0};
done
Additionally, remove lpcxpresso55s69_ns overlay targets where they are
no longer needed (or rename them where they are)
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Allow all tests which run in the real nrf52840 to also
run in the simulated nrf52_bsim.
That way we will have runtime tests in CI.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add a DT overlay so this test can also be run in the nrf52_bsim
simulated board.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
