Add support for running the audio BSIM tests on the
nrf5340bsim board.
This expands the tests we run in CI.
To support all tests with the hci_ipc sample for the netcore,
it is updated to support a bit more while still fitting on the
netcore on the nRF5340 series.
The behavior of advertisement seems to differ a little bit,
which required the bap_unicast_server_test.c to update how it
restarts advertisements.
Two broadcast tests that are passing on the nRF52 BSIM is also
failing due an assert. This should be investigated at a later
time.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a bsim test that verifies the behavior when the
assistant provides an incorrect code to the broadcast
sink.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This allows applications to modify the values set by an
existing unicast group, assuming that none of the streams in
the CIG has been connected.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Several BSIM tests did not enable -RealEncryption=1.
Since everything in LE Audio effectively requires encryption,
we should enable it, as we have seen a few tests passing before
that shouldn't, because they didn't set -RealEncryption=1.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a babblesim test for testing the behavior when providing
an invalid broadcast code as the broadcast sink.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The shell script did not provide -RealEncryption=1 which then never
really did proper encryption, which is the point of the test.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The interval and latency for a CIG are set for each direction now,
allowing applications to use e.g. 10ms for sink ASEs and 7.5ms for
source ASEs.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
These 2 tests have been seen failing in CI due to
the real time timeout.
Let's increase their deadline so it does not happen.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add a babblesim test for the broadcast reception start procedure
from the CAP commander
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Remove explicit timeouts which are either the same as the
default one or smaller.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's increase the timeout for a few tests whose
timeout is less than 3x a typical execution time in CI.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In all scripts, where we were using the BOARD variable
let's use BOARD_TS which is the full BOARD target string
with "/" replaced with "_"
This is neccessary to support hwmv2 board names
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Use the common functions instead of
replicating functionality and do a minor cleanup
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The PBP bsim tests had several issues that was not uncovered
until the PA sync timeout was increased. This commit fixes these,
as well as increase some timeout values due to recently
increased PA sync timeout.
Among the issues were lack of support for the alternating PBA
features, missing reset of values and specific time sleeps.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Increase the timeouts to be 60 instead of 6.
The reason for this is that some controllers (like the Zephyr
controller) will reserve some of these to ensure stability,
and in fact with skip = 5 and retry = 6, it would still
send the PA reports at every interval.
To accomodate a higher timeout value, the functions used to
convert PA intervals to PA timeouts have been updated.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This test has been seen failing in older slower computers
due to timeouts, let's increase the timeout so we don't
break in those cases.
Note this timeout is just a safety to eventually kill
hung simulations even if nobody presses Ctrl+C.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The LE Audio implementations do not really support bonding yet,
and removing subs on disconnect is the most effective (and correct)
way of ensuring that we do not subscribe more than once when we
re-discover after reconnection.
The broadcast assistant and the media control client does not
support multiple connections as of this commit, so they needed
special treatment. In the case that we do discovery on multiple
ACL connections, it is important that the existing subscriptions
are removed correctly by calling bt_gatt_unsubscribe.
In order to implement this change properly on some of the clients,
thet had no proper connection references or support
for clearing the data on disconnects, they had to be updated
as well.
The csip_notify.sh test has been disabled, as that expected a
notification in the client, but since this commit removes that
(until bonding is properly supported in the clients), then the
test will fail.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some of the CSIP tests take a while to run given the number of
devices, and some of them started to fail in CI because of a
timeout, so we increase the EXECUTE_TIMEOUT a bit.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
PBP API allows sources to create a Public Broadcast Announcement.
PBP API to parse a Public Broadcast Announcement.
public_broadcast_source application starts extended advertising and
includes a Public Broadcast Announcement. The advertised broadcast
audio stream quality will cycle between high and standard quality.
public_broadcast_sink application scans for broadcast sources and
synchronizes to the first found source which defines a Public Broadcast
Announcement including a High Quality Public Broadcast Audio Stream
configuration.
Add bsim tests for Public Broadcast Profile APIs.
Add shell implementation for Public Broadcast Profile APIs.
Signed-off-by: Daniela Andreea Dumitrache <danielaandreea.dumitrache@nxp.com>
Implement the CAP Commander discovery function.
Adds support for it in the shell.
This includes initial babblesim and unit testing as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add BSIM testing of GMAP, with all spec-specified audio
configuration combinations added and tested.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add implementation to reduce CIG's CIS retransmissions so as
to meet the Host requested Maximum Transport Latency.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update the BAP broadcast tests to use the BSIM sync API
instead of sleeps, to ensure that everything is sent
and receive correctly, regardless of timing.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The test is currently broken in main and blocking
all other development when triggered.
Let's disable it by now as a provisional measure.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add a test for the broadcast sink that uses the BAP
Scan Delegator functionality with a Broadcast Assistant
device adding the broadcast source.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Verify that a HAS Server IUT sends changed characteristic notifications
or indications when the Lower Tester reconnects.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Added retry mechanic to CSIP notifications by adding them into system
workqueue. Bookkeeping is done for notifications for all clients, and
potentially disconncted clients will also receive notifications on
reconnect. This also adds mechanic to restore the local clients list
upon registration of the service, as well as BSIMs to test notify on
reconnect.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
The purpose of this test is to verify that the stack has
the correct behavior if the ACL disconnects while one or
more streams are in the streaming state.
The main point it validates is that unicast server device
can restart advertising using a simple k_work in the
disconnected callback.
The number of connections supported by the test suite has
also been reduced to 3, to avoid some seen issues with
scheduling when CONFIG_BT_MAX_CONN=5.
A part of implementing the test for this purpose, the
unicast client and unicast server have been extended
to also advertise and scan for proper ASCS advertising
data.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added a BSIM tests for PACS notification functionality. This test
tests that all optional notifies are working, as well as verifying
that a disconnected subscribed client will be notified on reconnect.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Typically the client is the first device in our babblesim tests, so
reordered the initiator and acceptor for the CAP tests to conform to
that.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add test of the unicast audio cancel that can cancel any pending
procedures. This is done by adding a new blocking behavior in the
cap acceptor.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add implementation of the Telephony and Media Audio Service, as well as
two sample applications.
tmap_central reflects a smartphone implementing the Unicast Media Sender
and Call Gateway TMAP roles.
tmap_peripheral reflects an earbud implementing the Unicast Media
Receiver and Call Terminal TMAP roles.
Upon connection, tmap_central starts an audio stream using CAP Initiator
APIs.
CCP, MCP and VCP are discovered and used to send example commands.
Future improvements: 2-earbud support, add TMAP Broadcast roles,
update with new CAP Acceptor/Commander APIs as they become available
Signed-off-by: Silviu Petria <silviu.petria@nxp.com>
Add tests for cases where the rank characteristic, the size
characteristic and the lock characteristics are not set on the
set members.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Split the CSIP tests to multiple scripts to make them
more specific and able to run in parallel.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Test scripts need to have executable permissions.
Otherwise, run_parallel will change the mode in CI,
and users need to set them locally which results
in a not clean git workspace.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add a test case that tests the scan delegator and
broadcast assistant features when the scan delegator
syncs to a PA without being asked to by the
broadcast assistant.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The current seed causes a failure with the updated HW models
due to a change in the random draw, that happens to unluckily
cause the test to fail.
Avoide it with a different random seed.
This is due to a known issue in the controller, which is
being worked on by the maintainer.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Move common parts to common scripts,
and clean up some unnecessary content.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
