For code clarity, remove unnecessary `return` statements
in functions with a void return type they don't affect control flow.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
1. kenistis dspi does support rx and tx with different size,
so skip the tx_bigger test.
2. dspi dma need internal alignment and 8192 bytes are too
many for k64, so reduce to 1440 bytes
fixing: #77010
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
The current `K_THREAD_STACK_DEFINE` only create a single stack
shared by all the busy threads. This is causing the application
to crash when there are more than 2 cores in the system.
We should use `K_THREAD_STACK_ARRAY_DEFINE` to create an array
of stacks instead.
Updated the testcase to test up to 8 cores using
qemu_riscv64_smp
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
BAP mandates support for bondable mode for all central and
peripheral roles.
Due to Kconfig circular dependencies, some additional
Kconfig changes had to be made.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The native_sim has already been added to the test cases of
`drivers.ieee802154.build.external` is not being appropriately
processed because there is no corresponding overlay.
Create an overlay as an alias of native_posix.overlay.
Also, add the native_sim/native/64 platforms in the same way.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Added new Kconfigs for defining permission level of GATT
characteristics that are part of the Bluetooth SMP service in the
MCUmgr subsys.
Removed the CONFIG_MCUMGR_TRANSPORT_BT_AUTHEN as the new Kconfig
options are mutually exclusive and need to be groupa as the Kconfig
choice option.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Let's run tests with security/privacy with the HW models acutually
running the encryptions, so in case of missaligned keys
tests fail.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's run tests with security/privacy with the HW models acutually
running the encryptions, so in case of missaligned keys
tests fail.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's run tests with security/privacy with the HW models acutually
running the encryption, so in case of missaligned keys
tests fail.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's run tests with security/privacy with the HW models acutually
running the encryptions, so in case of missaligned keys
tests fail.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This commit re-enables the following platforms for the
`kernel.common.stack_sentinel` test:
* `hifive1`
* `m2gl025_miv`
These platforms working correctly after Renode was upgraded to 1.15.2 in
the CI.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Ethernet board variant was missed in commit 138e9591f8 (tests: net:
wifi: exclude RW612 based boards), but is the sole variant that actually
was running this test. Exclude this variant only, since it cannot build
this test due to requiring binary blobs.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Use `test_adc` in io-channels to be consistent in whole
tests/drivers/build_all/sensor/adc.dtsi file.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Rename the volume flag field from the generic "flags"
to "vol_flags" as the generic "flags" will be used for
other values in a future commit.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
test_dependent() was changed to test_entry() but one location was
missed - in a warning message string. Fix it too.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
More information in the test description.
Why: At the time of writing, this test exposes a bug in the Bluetooth stack
where all the RX buffers are in use, and the controller driver fails to
synchronously allocate a command response buffer.
This is manifested in an assertion failure in `hci_common.c`.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Adds coverage for attempting to connect while already connecting
or connecting to a device that already exists.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Fix warnings caught by running west build. Another fix will have to go
in to see why twister was missing these.
#78348
Signed-off-by: Yuval Peress <peress@google.com>
Removed deprecated native_posix as test platform.
Added unique sim_ids for tests with the psa as a overlay.
Fixed clang-format issues.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
When a message with invalid parameters is received, we must ignore it.
In this commit we check invalid parameters first.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This commit adds the following tests:
- Simple test for bridging table
- Test bridging table state changes
- Test persistence storage of subnet bridge
- Test IV Index update with subnet bridge
- Test network key removal for subnet bridge
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
When a synchronous API is used, the content of `buf` will not be
valid by the time the thread that called the synchronous API is woken up
again.
Therefore, the simplest way to solve this is when a user allocates the
buffer which will be filled up with the content of the buffer passed to
the model callback.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
The initial implementation of RPL check for Subnet Bridge wasn't fully
correct. It decides whether to relay or not a PDU based on RPL of only
received messages. However, the spec section 3.9.8 says:
```
In addition, a Subnet Bridge node shall implement replay protection for
all Access and Transport Control messages that are sent to bridged
subnets.
A Subnet Bridge node shall maintain the most recent IVISeq value for
each source address authorized to send messages to bridged subnets.
Messages received by the Subnet Bridge node with the IVISeq value less
than or equal to the last stored value from that source address shall
be discarded immediately upon reception. When a message is retransmitted
to a bridged subnet, the stored IVISeq value shall be updated. In this
way, bridged subnets are protected against replay attacks from other
subnets.
```
This was noticed with MESH/NODE/SBR/NET/BV-02-C test. It passes when
PTS misses the message at step 3 and 4, and fails when PTS manages to
receive the message.
This commit fixes the wrong behavior by removing argument for
`bt_mesh_rpl_check` function making store a new message and bypassing
`local_match` check in case of Subnet Bridge node.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Though nvs backend checks whether the data passed to it is identical to
the stored one, this isn't guaranteed by other the settings api. We can
also avoid going into the settings subsystem since we know what was
actually changed.
This commit adds 2 flags that allow to control whether Subnet Bridge
or Bridging Table states were changed and skips storing if the certain
state was not changed.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Added support for the Bridge Configuration client and server
to the tester application.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
Adds implementation for the Bridge Configuration Server model.
Updates `brg_cfg` module to add sanity check for
bt_mesh_brg_cfg_tbl_remove() API. Also, updates the unit test
accordingly.
Adds documentation for the Bridge Configuration Server model
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
The `brg_cfg` module implements the states needed for subnet bridge
feature. It provides two states - enable state, and bridging table
state. APIs are provided to access and modify the states. The module
handles responsibility of persistence of the states.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Adding documentation and function calles for the API's
in Bridge Configuration Client model and Bridge
Configuration Server model.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
Any places that checked for GTBS is now always enabled
as GTBS is mandatory to support, and the Kconfig option
was removed.
Also removed a duplicate Kconfig option for TBS,
BT_TBS_SERVICE_COUNT, as it was unused.
The other Kconfig option BT_TBS_BEARER_COUNT is used
instead exclusively to set it if needed.
Since GTBS can now exist alone, it must also
support having its own calls and other values.
This means that the GTBS and TBS instances now share
the same underlying struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
-add nucleo_u083rc and stm32u083c_dk boards for testbench purpose.
- add min_ram property to skip test on boards with little ram size.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Various tests and samples use POSIX-only functions. Define _POSIX_C_SOURCE
to ensure they are visible.
Signed-off-by: Keith Packard <keithp@keithp.com>
These functions requre non-null parameters; passing them NULL
values is undefined. Remove tests which are not valid.
Signed-off-by: Keith Packard <keithp@keithp.com>
