According to recvmsg man page, msg_controllen should be set to the sum
of the length of all control messages in the buffer.
This is missing from the current recvmsg implementation.
This commit aims to fix this by updating msg_controllen each time control
data are added to the buffer.
This commit also fixes cases where the msg_controllen is cleared
incorrectly.
Fixes#77303
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
RX time tracing tells how long it took from network packet
creation to when the stack got rid of it.
So the network device driver allocates net packet, this is the
start time. The end time is when the packet is fully processed.
Currently the limitation is that the RX time duration is used
for network packets that are tied to an open socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Utilize a code spell-checking tool to scan for and correct spelling errors
in all files within the `subsys/net/lib` directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Allocating FD before pulling the new connection from the fifo can lead
to busy looping in certain cases. If the application keeps calling
accept() on a listening socket after failing to allocate new FD for the
incoming connection, it'll start busy looping, as will report POLLIN in
such case (as the new connection is still on the queue), but it'll
consistently fail with ENFILE.
This can be avoided by trying to allocate new file descriptor only after
new connection has been pulled from the fifo. That way, if we fail to
allocate the file descriptor, the incoming connection will be dropped,
which seems correct given we don't have enough resources to service it.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This reverts commit 93973e2ead.
PR #73978 introduced a regression.
Unfortunately this PR cannot be reverted without reverting also
Let's revert both PRs to stabilize main again towards the 3.7 release.
For more details on the issue see
https://github.com/zephyrproject-rtos/zephyr/issues/75205
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Move the implementation of zsock_poll to zvfs_poll. This allows
other types of file descriptors to also make use of poll()
functionality even when the network subsystem is not enabled.
Additionally, it partially removes a dependency cycle between
posix and networking by moving functionality into a mutual
dependency.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
For each of the fdtable.h functions listed below, convert the
z_ prefixed semi-private functions to use the zvfs_ prefix.
ZVFS stands for Zephyr Virtual File System and
is intended to be a common library used by the C library,
POSIX API, Networking, Filesystem, and other areas.
There are already a few functions in fdtable.h that use the
zvfs_ prefix, so this change is mostly about unifying them in
a way that uses a suitable prefix ("namespace") so that it can
be considered a public API.
- z_alloc_fd
- z_fdtable_call_ioctl
- z_finalize_fd
- z_finalize_typed_fd
- z_free_fd
- z_get_fd_obj
- z_get_fd_obj_and_vtable
- z_get_obj_lock_and_cond
- z_reserve_fd
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Fill-in the mode field of the fd_entry so that the
implementation can be made aware that the specific file
descriptors created are sockets.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Add returning timestamp of received packet in ancillary data buffer
in `msghdr` structure. This commit enables getting timestamp of
the received packet by calling `recvmsg()` function. The function
returns in the `msg_control` field timestamp if following criteria
are met:
- `CONFIG_NET_CONTEXT_TIMESTAMPING` is set
- `SO_TIMESTAMPING` socket option has `SOF_TIMESTAMPING_RX_HARDWARE`
option enabled for that socket
- driver used by sockets supports packet timestamping
Signed-off-by: Adam Wojasinski <awojasinski@baylibre.com>
This is the last commit of the set of patches that introduces
`SO_TIMESTAMPING` socket level optino in Zephyr. The patch
adds `SOF_TIMESTAMPING_RX_HARDWARE` and `SOF_TIMESTAMPING_TX_HARDWARE`
bitmasks. It can be extedned in the future to cover more timestamping
features. Currently the feature can be used with ptp_clock driver.
Signed-off-by: Adam Wojasinski <awojasinski@baylibre.com>
If network socket tracing is enabled, then the system will track
various socket API calls for usage.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Namespaced the generated headers with `zephyr` to prevent
potential conflict with other headers.
Introduce a temporary Kconfig `LEGACY_GENERATED_INCLUDE_PATH`
that is enabled by default. This allows the developers to
continue the use of the old include paths for the time being
until it is deprecated and eventually removed. The Kconfig will
generate a build-time warning message, similar to the
`CONFIG_TIMER_RANDOM_GENERATOR`.
Updated the includes path of in-tree sources accordingly.
Most of the changes here are scripted, check the PR for more
info.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Print also thread name when printing socket access error.
This helps debugging what thread caused it.
Lowering the Error to Debug as we could be missing vtable
for example for eventfd descriptors, this is easily seen when using
socket service API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The local address used for established TCP socket needs to be
dig out from TCP internals and not from context->local.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add support for IPv6 Source Address Selection defined in RFC 5014.
This commit does not add any address selection support to getaddrinfo()
as described in the RFC. The AI_EXTFLAGS symbol and also the ai_eflags
to hints is added but they are not used by the code.
The public/temporary address selection is only done internally by
the net_if_ipv6_select_src_addr_hint() according to flags set by
setsockopt().
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Use only Zephyr specific POSIX header files so that the whole
system is getting values from the same files. There was an issue with
native_sim run of tests/net/socket/af_packet which had O_BLOCKING set
to 0x4000 from include/zephyr/posix/fcntl.h, but then the file
subsys/net/lib/socket/sockets.c was having O_BLOCKING set to 0x0800
because different header files were used.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Have special wrappers for zsock_fcntl and zsock_ioctl functions
so that gcc warning can be avoided.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If recvmsg() does not update control data, then it must
set msg_controllen length to 0 so that the caller can
understand this.
Fixes#68352
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add sockaddr member in struct net_pkt to store peer address if offloaded
network inteface is used. This enables recvfrom() to fill in src_addr if
socket type is UDP and offloaded interface driver supports it.
Signed-off-by: John Johnson <john.filip.johnson@gmail.com>
If user has not supplied address pointer when calling accept(),
then we would not be able to figure out the used socket domain
properly. But as there is now SO_DOMAIN option supported, use
that to get the correct socket domain.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The getsockopt() will return the address domain of the given
socket like AF_INET or AF_INET6.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
According to the POSIX specification, null pointer
is a valid value for the `address` argument
of the `accept` function.
This commit adds a check to prevent a null pointer
dereference inside `z_impl_zsock_accept`.
Signed-off-by: Mirko Covizzi <mirko.covizzi@nordicsemi.no>
Make sure iovec is initialized to a value so that there
is no possibility that it is accessed uninitialized.
Fixes: #66838
Coverity-CID: 334911
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When a TCP connection is established, if there is no data exchange
between the two parties within the set time, the side that enables
TCP Keep-alive will send a TCP probe packet with the same sequence
number as the previous TCP packet. This TCP probe packet is an empty
ACK packet (the specification recommends that it should not contain
any data, but can also contain 1 nonsense byte, such as 0x00.). If
there is no response from the other side after several consecutive
probe packets are sent, it is determined that the tcp connection has
failed, and the connection is closed.
The keep-alive default parameters are aligned with Linux defaults.
Signed-off-by: Horse Ma <mawei@coltsmart.com>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Zephyr has its own multicast join/leave API but for
interoperability, it is possible to use the multicast
socket API and IPV6_ADD_MEMBERSHIP and IPV6_DROP_MEMBERSHIP
socket options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Zephyr has its own multicast join/leave API but for
interoperability, it is possible to use the multicast
socket API and IP_ADD_MEMBERSHIP and IP_DROP_MEMBERSHIP
socket options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The IPv4 TTL could only manipulated via net_context interface.
It makes sense to allow the same from socket interface via
the setsockopt/getsockopt calls.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add extra checks that make sure that msg_iov is set
as we cannot receive anything if receive buffers are
not set.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If we for some reason are supplied unsupported socket type in
recvfrom(), then return ENOTSUP error to the caller instead of
silently accept it by returning 0.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If user has set either IP_PKTINFO (for IPv4) or
IPV6_RECVPKTINFO (for IPv6) socket options, then the system
will return relevant information in recvmsg() ancillary data.
Fixes#36415
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add IP_PKTINFO or IPV6_RECVPKTINFO BSD socket options that
can be used to get extra information of received data in
the ancillary data in recvmsg() call.
For IPV6_RECVPKTINFO see RFC 3542 for details.
For IP_PKTINFO see Linux ip(7) manual page for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Move the syscall_handler.h header, used internally only to a dedicated
internal folder that should not be used outside of Zephyr.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This allows IPv4 and IPv6 share the same port space.
User can still control the behavior of the v4-mapping-to-v6
by using the IPV6_V6ONLY socket option at runtime.
Currently the IPv4 mapping to IPv6 is turned off by
default, and also the IPV6_V6ONLY is true by default which
means that IPv4 and IPv6 do not share the port space.
Only way to use v4-mapping-to-v6 is to enable the Kconfig
option and turn off the v6only socket option.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This adds a function k_object_is_valid() to check if a kernel
object exists, of certain type, and has been initialized.
This replaces the same (or very similar) code that has been
copied from kernel into the network subsystem.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
