Ensure that the output certificates directory is created, where
generated certificates will be placed. This fixes a build error seen
when using `make` to build samples/net/wifi for the rd_rw612_bga board,
where the output directory for generated certificates did not exist at
build time.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Increase wifi connect input parameters max count to 13. Previous count
7 is not enough if other security type is supported.
When enabling softAP, the parameter cnx_params in cmd_wifi_ap_enable()
is with static key word. Then the parameter will always save
configurations of last time. Remove static keyword to eliminate effects
of configs from last tim and do memset before setting up softAP.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Increase max count of CONFIG_WIFI_SHELL_MAX_AP_STA from 5 to 8. The
SoftAP of NXP wifi chip can support up to 8 stations.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Added new flag CONFIG_WIFI_NM_HOSTAPD_AP for hostapd support. Once this
flag is enabled, softAP will be setup by hostapd. Both wpa_supplicant
and hostapd uses same task and eloop.
Included necessary hostapd files when compiling wifi samples if
CONFIG_WIFI_NM_HOSTAPD_AP is enabled. Added hostapd support for all
softAP command of L2 wifi shell commands.
Signed-off-by: Hui Bai <hui.bai@nxp.com>
Add basic WPA2 EAP-TLS support.
Also, add test infrasturcture esp. the certification handling,
non-certificate credentials are take as runtime input and certificated
are build time input for testing.
A real application can set certificates at runtime too.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Refactor (1 << xyz) to use the BIT(xyz) macro.
The change aims to enhance code readability.
Signed-off-by: Muhammad Haziq <muhammad.haziq@zintechnologies.com>
Introduce `wifi_utils_get_next_chan_6g` to get the next
valid Wi-Fi 6GHz channel.
This commit addresses the proper handling of cases when
`chan_start` is not 1.
Fix#74063
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Enhancing code consistency provides cognitive leverage with
the following changes:
- Unified the order of declaration for `opt`, `opt_index`,
`state`, and `long_options`.
- Unified the wrapping of `getopt_long` calls, regardless of
the length of the `options` string.
- Renamed `option_index` to `opt_index` for consistency.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Using `getopt_state` to access `optarg` and also `optopt` offers
a better alternative to direct global access.
See e145eb9201 for the previous change related to this.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
This change marks the remaining instance of the `struct option` as
`static const`.
The rationale is that `struct option` is a read-only variable.
By using `static const`, we ensure immutability, leading to usage of only
the `.rodata` section and a reduction in the `.data` area.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Various manual code formatting adjustments, including:
- Wrapping lines in the `long_options` declaration to prevent them
from extending too far to the right.
- Adding missing `{` and `}` in the `if` statement in
`cmd_wifi_set_rts_threshold`.
- Aligning `SHELL_CMD_ARG` in `wifi_commands` with previous declarations.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Current PHY rate
It represents the current PHY rate of transfer
of data in bits per second. It will a TX data rate.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
Over run count
It represents the number of packets dropped either at
received and sent due to lack of buffer memory to retain
all packets on the network interface.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
For 2.4GHz and 6GHz bands, while counting the channels in configured
range, start of the range is being counted twice. Correct this
by advancing the index by 1 while counting channels in range.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
This is related to change in commit dacb3dbfeb
("iterable_sections: move to specific header")
Until now iterable sections APIs have been part of the toolchain
(common) headers. They are not strictly related to a toolchain, they
just rely on linker providing support for sections. Most files relied on
indirect includes to access the API, now, it is included as needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Fix the NM iface type check error, should use (1 << WIFI_TYPE_STA),
instead of WIFI_TYPE_STA. Same for WIFI_TYPE_SAP.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
If newly introduced interface type is unset then return the first Wi-Fi
interface as a fallback, this fixes backward compatibility.
Also, add NM APIs and use them for type checks, rather than directly
using the type enumeration.
Fixes#75332.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The sscanf() is not available for minimal libc so it cannot be used.
Use the net_bytes_from_str() that is provided for this purposes.
Fixes#75029
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Split wifi interface into station mode and soft-AP mode, as there may be
station and soft-AP two interfaces that work concurrently.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
The control and data settings are set improperly for packet filter
operation for sniffer operation. The change sets them properly.
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
For default case it should print the option character provided by user.
Extra shell_help removed as it's being called in the caller function.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Support to set BSS parameter "max_num_sta" at compile and run time
Added support to configure `max_num_sta` BSS parameter.
Maximum number of stations allowed in station table. New stations will be
rejected after the station table is full.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Support for configuration of AP parameter "Skip inactivity poll".
Only build time setting is supported.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Support to set BSS parameter at compile and run time.
Added support to configure `max_inactivity` BSS parameter.
Station inactivity timeout is the period for which AP may keep a client
in associated state while there is no traffic from that particular client.
If a non-zero value is set, AP may choose to disassociate the
client after the timeout.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
When channel range is configured in scan params, get the
channel count from `chan_idx` instead of taking a difference
of start and end of the channel range. The `difference` method
fails in case of 5GHz band since channels may not be consecutive
numbers.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Unicast RX stats
It represents total number of unicast (any type data, action or
any other unicast frames) frames received at firmware level.
The actual frames passed to host will be different as firmware
may drop packets or some packets may be dropped because of
errors.
Unicast TX stats
Transmission side the unicast packets count states the packets
handed over to firmware. The stats taken at firmware level.
Actual packets transmission may vary depending upon various factors.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Use lock while accessing nm data.
One of the use case is while setting regulatory, it accesses nm data,
while from some other place also it can be accessed same time.
Protected the nm data processing.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Even though we are passing mandatory args from the shell registration,
due to use of getopt the check can be bypassed without the hyphenated
options.
So, enforce and fail if mandatory parameters aren't passed through
getopt.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Updates the linker script fragments under 'subsys' to use
Z_LINK_ITERABLE_SUBALIGN for the subalignment instead of
a hardcoded value of 4.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Applications need to run a scan to identify the security
mode before attempting the connection which adds to the time
taken for connection to be established.
To avoid the initial scan, support auto security mode which will
enable STA to choose between WPA, WPA2 and WPA3, based on the
network configuration.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Since `NONE` is a valid option for key management in `connect`
command, we should remove the part in help text which says:
"valid only for secure SSIDs".
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
