Fix CIS accepted by Host being failed in the Controller with
reason 0x20 Unsupported LL Parameter Value, by relaxing the
check that the ACL connection is sufficiently placed such
that the time reservation using in the Controller
implementation does not overlap with the CIG event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Kconfig option to turn off ISO Data Packet Sequence Number
use to place the ISO Data in the correct radio event,
instead simply buffer it to next radio event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ISO data timestamp to reflect the SDU reference point
and not the ISO event anchor point when PDUs received after
retransmissions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add BT_CTLR_EVENT_OVERHEAD_RESERVE_MAX Kconfig to allow the
omit of EVENT_OVERHEAD_START_US and EVENT_OVERHEAD_END_US in
the time reservation calculations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix CIS assymmetric PHY usage by adding implementation to
use correct PHY in radio when switching transceiver.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix assertion due to late Peripheral CIS active flag being
initialized. CIS active flag shall be initialized when it is
acquired.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
To keep track of requested/pending CIS LLL flushing, change 'flushed'
binary state to 'flush' with states NONE, PENDING and COMPLETE.
This enables CIS teardown to know that a CIS already has a pending LLL
flush, and ULL does not need to initiate it.
Signed-off-by: Morten Priess <mtpr@oticon.com>
When config BT_CTLR_PERIPHERAL_ISO_EARLY_CIG_START is enabled, the
minimum accepted offset value in the CIS_REQ is the minimum defined by
the spec.
Add define CIS_MIN_OFFSET_MIN with value 500 us, as defined in the Core
spec. The previously used value of 400 us was incorrect.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Rework internal header files to not have includes, rather
have the required includes in the c source files.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In order to have clean, self-contained HCI headers that do not have any
dependencies towards the Host or any other part of the system (except
types), reorganize the headers in the following way:
- Split out the macros and structs from hci.h to a new hci_types.h
- Merge the existing hci_err.h into the new hci_types.h
Fixes#58214.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Up until now, it has not been possible to reconfigure a CIG and its
CISes after initial configuration, without first removing the CIG.
With this commit, le_set_cig_parameters allows the following
reconfiguration operations in configuration state:
- Set new CIG configuration parameters on existing CIG
- Iteratively configure single CIS (of more CISes)
- Increment number of CISes via multiple configuration calls
- Keep handle- and CIS_ID relation
Changes:
- Pass handles in le_set_cig_parameters from ll_cig_parameters_commit
via output variable.
- Implement CIG state variable instead of 'started', with states
IDLE/CONFIGURABLE, ACTIVE and INACTIVE.
- Implement ll_conn_iso_stream_get_by_id for easier access to specific
CIS.
This fixes the following CIS Central EBQ tests:
- HCI/CIS/BI-10-C
- HCI/CIS/BI-11-C
- HCI/CIS/BI-13-C
- HCI/CIS/BV-05-C
Signed-off-by: Morten Priess <mtpr@oticon.com>
The scope for the burst number for tx and rx is currently at module
level in both lll_central_iso.c and lll_peripheral_iso.c
This PR puts the scope to the lll level
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Fix CIS offset_min calculation to consider that ACL interval
and ISO interval can be dissimilar and the offset value has
to be compensated for the latency until the instant at which
the offset is used.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix implementation of CIS Null PDU Indicator use to meet the
BT Specification statement, that, if the source of the data
fails to provide a payload in time for a CIS subevent, then
the link layer shall transmit a CIS Null PDU instead.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use the minimum supported cis_offset_min considering that
ACL radio event does not overlap with CIG event. Use the
calculated maximum of local and remote cis_offset_min in the
Response PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit enables having multiple CIS/CIG setups/connects and
teardowns in sequence.
- For central, cig->lll.num_cis is initialized to cis_count and
untouched until ll_cig_remove. The value shall indicate number of
allocated instances, to ensure correct CIG traversal.
- Keep CIG/CIS instances for central until ll_cig_remove
- Initialize CIS instance state vars in ll_cis_create, similar to the
peripheral flow.
- In ll_cig_remove, always release streams and CIG instance. Do not
remove paths, as this is done from host at bt_iso_chan_disconnected.
- Remove unsued cis_count member in ll_conn_iso_group.
- Use correct function ull_iso_lll_ack_enqueue at LLL flush to have
data path respected.
Signed-off-by: Morten Priess <mtpr@oticon.com>
This commit removes the legacy LLCP code including the
Kconfig option
It also updates the babblesim tests, and removes the
tests for the legacy controller
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
If CIS offset in LL_CIS_IND is less than EVENT_OVERHEAD_START_US, the
controller is not able to establish the CIS in the ACL connection event
specified, but needs to start setup one connection event earlier.
With this commit, if offset is larger than EVENT_OVERHEAD_START_US the
first CIS event can be prepared in due time immediately.
This enables the controller to setup first CIS, even when instant is
equal to the ACL event_counter.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix uninitialized CIS LLL structure member variables,
uninitialised CIS acl_handle causes HCI command disallowed
for acl_handle's other than 0x0000.
Initialize other variables like sn, nesn etc. when create
CIS control procedure is performed.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix uninitialized CIG ULL reference count when creating a
CIG after a previous disconnection.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix CIS and CIG teardown in Central and Peripheral Role.
cig->lll.num_cis value is used in peripheral role to count
active CISes, and cig->cis_count is used in central role.
Both central and peripheral will stop ticker for CIG when
num_cis and/or cis_count is zero, respectively, but only
peripheral role will release a CIG context. The Central
will keep the CIG context allocated and only mark it as
not started. Remove CIG command will be used for central
role to release a CIG context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use instant_latency at the CIG start event count to detect
skipped connection event around the instant. In the future
add implementation to compensate for skipped ACL connection
event and adjust the CIS event count at CIG start.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use BT Spec. defined abbreviations for number of subevents
(nse), burst number (bn), flush timeout (ft) etc.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Re-arrange include in ull_peripheral_iso file to be
consistent with other similar files (ull_central_iso).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rename LAST_VALID_CIS_HANDLE to LL_CIS_HANDLE_LAST, to be
consistent naming with LL_CIS_HANDLE_BASE.
Add IDX_FROM_HANDLE defines.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Make Data, ISO, BIS and CIS PDU structure's octet 3 vendor
specific.
This will allow vendors not supporting the octet 3 or
CTEInfo (8 bits) to save 1 octet in their PDU structures.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The `bluetooth/common/log.h` and `bluetooth/common/log.c` files have been
removed. Files that were using them have been updated to use
`zephyr/logging/log.h` instead.
Those replacement have been done consequently:
- `/BT_DBG/LOG_DBG/`
- `/BT_ERR/LOG_ERR/`
- `/BT_WARN/LOG_WRN/`
- `/BT_INFO/LOG_INF/`
- `/BT_HEXDUMP_DBG/LOG_HEXDUMP_DBG/`
- `/BT_DBG_OBJ_ID/LOG_DBG_OBJ_ID/`
Also, some files were relying on the `common/log.h` include to include
`zephyr/bluetooth/hci.h`, in those cases the include of `hci.h` has
been added.
For files that were including `common/log.h` but not using any logs,
the include has been removed and not replaced.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
- Add CIS Create policy config choices
- Implemented CIS Central in ULL following proposed setup/commit flow
- Full support for HCI_LE_Set_CIG_Parameters_Test
- Extend ull_conn_iso_start and ull_conn_iso_ticker_cb to handle
central role
- Partial support for HCI_LE_Set_CIG_Parameters. TODOs:
* Drop suggested retransmissions if Max_Transmission_Latency is
exceeded
* Calculate ISO interval based on policy
Signed-off-by: Morten Priess <mtpr@oticon.com>
Move ull_peripheral_iso_start ull_peripheral_iso_ticker_cb to
ull_conn_iso, to share code between CIS peripheral and central.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Adding controller support for updating SCA in ACL and ISO peripherals
Adding HCI API support for le_request_peer_sca and complete event.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Check LE event mask state as well as host controlled feature mask state
and reject CIS request accordingly.
Release pre-allocated ISO resources on rejection of request
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Program CIG ticker with window widening drift. Introduce vendor specific
conversion macros allowing sub-microsecond resolution in the
accumulation of window widening drift per interval.
Calculation of window_widening_max_us is done for NSE<3, and must be
adjusted in the LLL before use, if the first CIS in the CIG has a
NSE>=3. In that case window_widening_max_us shall be limited to one sub
interval.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Implemented:
-- Combining segments from multiple SDUs in a single PDU for TX
-- Release of PDU based on remaining capacity below threshold
-- Release of any PDUs in production on receiving a timeout for the
upcoming event
-- Release of PDUs in production if source if destroyed
-- Synchronization flag to exclude multiple contexts in ISO-AL
-- New Kconfig BT_CTLR_ISO_TX_SEG_PLAYLOAD_MIN to allow definition of
minimum TX segment size
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
The LE Accept/Reject CIS Request commands shall return Unknown
Connection Identifier if the handle is not a CIS handle or does not
exist. If the CIS already has been established, the commands shall
return Command Disallowed.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Setting the new LLCP as default exposed errors in CI tests, which
are fixed here
Note that advanced scheduling needs to be disabled. Work is in
progress for implementing this for the new LLCP
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
Implements PDU flow and unittest of CIS Create on Peripheral
Hooks CIS Create into the controller and fixes a few minor
things in ull to allow for running with NEW LLCP
Also handles CONFIG based comilation of CIS Create
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
- Prioritize CIS_REQ handling in (old) LLCP
- Reject if CIS_REQ uses exisiting CIS ID
These fixes prevent assertions in /LL/CIS/PER/BV-38-C.
Signed-off-by: Morten Priess <mtpr@oticon.com>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- ISO TX data path for HCI and support for vendor path
- ISO-AL segmentation of framed PDUs
- Insertion of segment headers
- Reconstruction and storing of CIG reference point in ULL
- Calculation and insertion of of Time-Offset
- Exit error spooling in ISO-AL on detecting start
- ISO-AL TX unframed fragmentation
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Signed-off-by: Morten Priess <mtpr@oticon.com>
Adds reassembly of framed PDUs to ISO adaptation layer.
Reference times are also computed based on anchor points,
transmission latency components and a PDU specific time offset.
Some partial preparations for ISO broadcast can be found for
convenience. This needs to be properly merged, and currently will not
work with both CONFIG_BT_CTLR_CONN_ISO and CONFIG_BT_CTLR_SYNC_ISO
enabled.
Includes fixes and improvements for unframed mode.
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
Signed-off-by: Morten Priess <mtpr@oticon.com>
The ticker `ticks_drift` is propagated via the ticker
elapsed callback, in order to provide necessary information
to correctly calculate total elapsed durations by states and
roles that use ticker extensions to mitigate scheduling
collisions by drifting within a permitted window.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The Bluetooth Core Specification, version 5.3, has introduced multiple
changes to several widely-used terms in order to make them inclusive.
Update the public API to reflect this, excluding hci.h, which will be
done in a subsequent commit.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When an ACL connection with active CISes terminates, inject CIS/CIG
teardown to ensure CIS is stopped before ACL disconnection completes.
This includes stopping CIG ticker when last CIS has stopped.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Maintaining the cis_handles array in ULL/LLL ISO group data amounts to
double book-keeping. This commit eliminates the array and introduces a
'getter' for obtaining CISes owned by a specific CIG, and iterate
through them.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Moved sdu_interval struct members from llcp_cis to cis group,
to match spec and enable access by ULL
Signed-off-by: Asger Munk Nielsen <asmk@oticon.com>
