Utilize a code spell-checking tool to scan for and correct spelling errors
in all files within the subsys/bluetooth/controller directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
ull_adv_sync_pdu_set_clear does pretty much everything, causing
it to be very complex and awkward to use. In addition, it only handles
a single PDU, meaning callers have to handle the chain.
It has been replaced with simpler, more complete functions for handling
the relevant operations
Fixed issues include:
- Fragmentation of adv data over HCI is now decoupled from PDU
fragmentation, fixing HCI/DDI/BI-13-C, LL/DDI/ADV/BV-26-C and
LL/DDI/ADV/BV-55-C
- Adding BigInfo now preserves the PDU chain
- Enabling periodic advertising with ADI on would sometimes fail
due to insufficient space in a single PDU to add ADI
Signed-off-by: Troels Nilsson <trnn@demant.com>
Implement LL_ASSERT_INFO1 and LL_ASSERT_INFO2 for triggering assertions
with parameter information provided for vendor core dump.
Adds Kconfig CONFIG_BT_CTLR_ASSERT_VENDOR by which the new LL asserts
map to BT_ASSERT_VND macros, which shall be implemented in the
debug_vendor_hal.h of the platform. If not enabled, LL_ASSERT_INFO will
map to existing BT_ASSERT_MSG with parameters printed.
Add use of LL_ASSERT_INFO2 where ull_ticker_stop_with_mark() result may
assert.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Generic node_rx_hdr struct contains data not used for done event, so this
pdu specific data is moved to node_rx_pdu to minimize memory usage for
MFIFO_done alloc.
This however calls for a considerable write-through replacing the generic
node_rx_hdr with node_rx_pdu when relevant and needed.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Fix bitfield crossing byte boundary - replaced with macros for
setting/getting the values
Fix missing endianness conversion for evt_cntr
Changed aa from uint32_t to uint8_t[4] to align with the rest of
the code and avoid any potential endianness issues
Signed-off-by: Troels Nilsson <trnn@demant.com>
When using the JIT scheduler (CONFIG_BT_CTLR_JIT_SCHEDULING), doing
ticker updates which only change the slot reservation, will fail.
For compatibility, the updates to ull.ticks_slot are preserved, as some
link layer implementations use this to predict collisions.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Rework internal header files to not have includes, rather
have the required includes in the c source files.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In order to have clean, self-contained HCI headers that do not have any
dependencies towards the Host or any other part of the system (except
types), reorganize the headers in the following way:
- Split out the macros and structs from hci.h to a new hci_types.h
- Merge the existing hci_err.h into the new hci_types.h
Fixes#58214.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Bitsets across byte boundaries does not work properly for big-endian;
Converted to use two uint8's instead
Signed-off-by: Troels Nilsson <trnn@demant.com>
Central multiple CIS create implementation using advanced
scheduling to find the active CIG events and calculate the
CIS offset to be used in the LL_CIS_REQ PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is re-introduction of Extended, Periodic Advertising
and Broadcast ISO using ticker expire info feature to get
the aux, sync and BIG offsets.
Relates to commit 714d74b77b ("Bluetooth: controller: Use
new ticker feature to get offsets").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated the 3 places in extended advertising where the ticker was
previously inquired about the expiration of another ticker ID in a
separate mayfly (adv_aux, adv_sync and adv_iso). It will now use the
new ticker feature where another ticker IDs expiration info will be
added to the callback.
Channel map updates are now handled in ticker_cb and applied immediately
if the ticker is not running
Signed-off-by: Troels Nilsson <trnn@demant.com>
Fix AUX_ADV_IND AUX_SYNC_IND radio utilization by having a
configurable offset.
Define an offset between AUX_ADV_IND and AUX_SYNC_IND when
using Advertising Interval for the Extended Advertising and
Periodic Advertising that are same or multiple of each
other, respectively.
Note, to get advertising intervals that are same or
multiple, the Periodic Advertising Interval shall be 10
millisecond more than the Extended Advertising Interval;
this is because the AUX_ADV_IND PDUs are scheduled as
periodic events of Extended Advertising Interval plus 10
milliseconds (Advertising Random Delay) as the periodic
interval.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Periodic Advertising time reservation when enabling with
ADI support. As the PDU is updated, use the updated PDU to
calculate the time reservation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to schedule BIG events after Periodic
Advertising when Periodic Advertising is enabled after
Extended Advertising has already been enabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Make Data, ISO, BIS and CIS PDU structure's octet 3 vendor
specific.
This will allow vendors not supporting the octet 3 or
CTEInfo (8 bits) to save 1 octet in their PDU structures.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The `bluetooth/common/log.h` and `bluetooth/common/log.c` files have been
removed. Files that were using them have been updated to use
`zephyr/logging/log.h` instead.
Those replacement have been done consequently:
- `/BT_DBG/LOG_DBG/`
- `/BT_ERR/LOG_ERR/`
- `/BT_WARN/LOG_WRN/`
- `/BT_INFO/LOG_INF/`
- `/BT_HEXDUMP_DBG/LOG_HEXDUMP_DBG/`
- `/BT_DBG_OBJ_ID/LOG_DBG_OBJ_ID/`
Also, some files were relying on the `common/log.h` include to include
`zephyr/bluetooth/hci.h`, in those cases the include of `hci.h` has
been added.
For files that were including `common/log.h` but not using any logs,
the include has been removed and not replaced.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Ensure maximum size of common extended header format be
reserved when CONFIG_BT_CTLR_ADV_RESERVE_MAX=n is used so
that changes to ACAD, like channel map update does not need
frequent update to periodic advertising auxiliary channel
PDU time reservations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When calculating the offsets between primary advertising
PDU, auxiliary PDU, Periodic Advertising PDU, and BIS PDU,
the values used as anchor points for starting the periodic
interval for auxiliary, periodic and BIG events, should be
ensured to have the minimum auxiliary frame spacing T_MAFS
between the PDUs. EVENT_OVERHEAD_START_US has to be reduced
as this value is used to offset the start of the radio
event on air.
Reverts commit b867f0e8a6 ("Bluetooth: Controller: Fix
T_MAFS between broadcasting roles").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Adds proper support for having more than one PDU pool for the advertising
PDUs (to save memory)
- Introduces lll_adv_aux_data_init, lll_adv_aux_scan_rsp_alloc and
lll_adv_sync_data_init to indicate if the PDU is a primary/legacy PDU
or secondary/auxillary PDU
- Scan response PDUs are initialized later, since the correct pool to draw
from depends on whether the advertising is extended or legacy
Signed-off-by: Troels Nilsson <trnn@demant.com>
Add EVENT_OVERHEAD_START_US to ticks_anchor when enabling
advertising, so the first advertising event is not late due
to calculations for aux packets etc.
Signed-off-by: Troels Nilsson <trnn@demant.com>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When calculating the offsets between primary advertising
PDU, auxiliary PDU, Periodic Advertising PDU, and BIS PDU,
the values used as anchor points for starting the periodic
interval for auxiliary, periodic and BIG events, should be
ensured to have the minimum auxiliary frame spacing T_MAFS
between the PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When periodic advertising with chaining is re-enabled after
changing interval or just re-enabled then the chain PDUs
where not duplicated causing the LLL to assert detecting the
presence of aux pointer but no linked chain PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Fix Extended Advertising and Periodic Advertising's parent
PDU's aux ptr field to contain correct aux offset value to
its chain PDU.
Uninitialized pointer reference to aux ptr in the parent PDU
was used before the pointer reference was returned by the
function adding the aux ptr fields in the parent PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use local variable to update current PDU's Common Extended
Header Format flags instead of updating it directly in the
PDU buffer. This is required to be able to non-destructively
be able to manipulate the PDU's header flags and contents
many time before a final commit of the updated PDU.
In order to calculate overflowed AD data length, PDU is
manipulated couple of times to determine the overflow length
and next to be able to add aux ptr field when chain PDU is
appended.
The changes are now consistent with how Periodic Advertising
PDU's Common Extended Header Format is manipulated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added define PDU_AC_EXT_AD_DATA_LEN_MAX, maximum AD data
length possible in AUX_ADV_IND when all Common Extended
Header Format fields are populuted.
Updated function description to explain the added ADI and
Aux Ptr fields support in updating the auxiliary PDUs.
Remove the redundant CTE info population code unnecessary
for new chain PDU as a result of AD data overflow.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor DF implementation to add aux offset in the aux
pointer field of the parent PDU when chain PDU is added
and/or is duplicated when PDU contents are updated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to support Extended Scan Response Data
fragment operation of first, intermediate, last, unchanged
and complete data operation using the HCI LE Set Extended
Scan Response Data Command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update ull_adv_sync_pdu_set_clear() to return aux_ptr
reference so that aux_ptr field for chain PDUs can be
pupulated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor PDU chaining implementation to add aux offset in
the aux pointer field in the parent PDU when duplicating
chain PDUs.
By adding the aux offsets in the ULL execution context the
LLL prepare execution in Extended and Periodic Advertising
does not need to have a O(n) while loop in LLL execution
context.
This will reduce CPU use in the highest priority ISR
compared to current implementation where chain PDUs where
duplicated in ULL execution context and aux offset populated
in LLL execution context.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Cleanup Periodic Advertising Chain PDUs auxiliary pointer
population, populate the back to back auxiliary pointer
field in thread context. Also, removed an unused code for
filling data.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor the ull_adv_aux_hdr_set_clear function so that the
caller of the function will enqueue the auxiliary PDU when
enqueuing the primary PDU.
This change is required to support chaining of AD Data where
parent auxiliary PDU will be added with aux ptr fields when
chain PDUs are appended.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Review rework of the fix to remove the jitter in aux offset
and sync offset values.
Force select BT_TICKER_REMAINDER_GET and BT_TICKER_LAZY_GET
features when Extended Advertising and Periodic Advertising
is supported.
Rename ticks and microsecond offset value struct members
for primary PDU event offset (to auxiliary PDU event).
Converted HAL_TICKER_REMOVE_JITTER and HAL_TICKER_ADD_JITTER
macro to functions.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use remainder value in scheduling the periodic auxiliary
PDUs and use the ticker next slot get interface with
remainder value to fill the auxiliary offsets with
microsecond precision in the primary channel PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated ticker implementation to return remainder value for
a ticker when enumerating active tickers with time
reservations.
This is required to find offsets and to use the remainder
value to correctly calculate auxiliary offsets to the
microsecond resolution.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When multiple advertising sets are support then use advanced
scheduling implementation to place multiple auxiliary PDUs
and periodic advertising PDUs in a non-overlapping schedule.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add initial support for Periodic Advertising Data fragment
operation support.
This commit is limited to detection of partial data if used
before Periodic Advertising is enabled, which will lead to
HCI error reason of command disallowed.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
