Generic node_rx_hdr struct contains data not used for done event, so this
pdu specific data is moved to node_rx_pdu to minimize memory usage for
MFIFO_done alloc.
This however calls for a considerable write-through replacing the generic
node_rx_hdr with node_rx_pdu when relevant and needed.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
The separate done memq was introduced to handle the old LLCP
stalling processing of the rx queue; This is no longer an issue with
the new LLCP, so we can remove it
Signed-off-by: Troels Nilsson <trnn@demant.com>
When possible re-use the already allocated RX node for notifications.
Store (retain) RX node and Link element on RX if NTF could occur.
Pass link element to LLCP (ull_cp_rx()) together with RX node.
New RX node type RETAIN introduced to signal retention
When no RX node is available allocate one and hold off TX on procedures
until such time that a node is available for NTF.
In case waiting for NTF buffer avail is needed, allocate and store TX
node to use for TX once NTF becomes available.
CIS Established (incl. timeout handling) is now handled entirely as a
specific event driven by ull_conn_iso - ie removal of procedure check
of cis->established and cis->expire, as this is doubling mechanism
in the conn_iso context.
Unit test and helpers updated to handle new node type.
Function ull_cp_release_ntf() was used only in unit test, so moved to
helper context.
Updating release_ntf to handle the fact that with piggy-backing in test
context the node used for NTF can be from two different memory pools
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Implementation of preliminary Central with multiple CIS
create support in Lower Link Layer. Uses a simple CIS
offset calculation that works when ACL are created with
connection interval that is multiple of CIG ISO interval.
Each ACLs are offset using BT_CTLR_CENTRAL_SPACING hence
having the same CIG sync delay values for all the ACLs.
Advanced Scheduling to setup CIS in any order of ACL and
CIS combination, ACL placed anywhere in timeline and CIS
creation will come therein will be implemented in later
Pull Requests.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When possible re-use the already allocated RX node for notifications.
Store (retain) RX node and Link element on RX if NTF could occur.
Pass link element to LLCP (ull_cp_rx()) together with RX node.
New RX node type RETAIN introduced to signal retention
When no RX node is available allocate one and hold off TX on procedures
until such time that a node is available for NTF.
In case waiting for NTF buffer avail is needed, allocate and store TX
node to use for TX once NTF becomes available.
CIS Established (incl. timeout handling) is now handled entirely as a
specific event driven by ull_conn_iso - ie removal of procedure check
of cis->established and cis->expire, as this is doubling mechanism
in the conn_iso context.
Unit test and helpers updated to handle new node type.
Function ull_cp_release_ntf() was used only in unit test, so moved to
helper context.
Updating release_ntf to handle the fact that with piggy-backing in test
context the node used for NTF can be from two different memory pools
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Adding a bit-mask to the 'extra' data structure allowing passing info
re. active CIS's to the ull_conn_iso_done handling. Per CIS storing
an expiration time counter, monitoring in done handling. Adding
establishment timeout monitor in CIS Create procedure, completing
and ntf'ing accordingly.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Implemented:
-- Combining segments from multiple SDUs in a single PDU for TX
-- Release of PDU based on remaining capacity below threshold
-- Release of any PDUs in production on receiving a timeout for the
upcoming event
-- Release of PDUs in production if source if destroyed
-- Synchronization flag to exclude multiple contexts in ISO-AL
-- New Kconfig BT_CTLR_ISO_TX_SEG_PLAYLOAD_MIN to allow definition of
minimum TX segment size
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
According to Bluetooth 5.3 Vol 4, Part E section 7.7.65.21 the
Controller should send an IQ report with Packet_Status set to 0xFF
and Sample_Count to 0x0, to inform Host that it is not able to
store IQ samples for all received Constant Tone Extensions and has
failed to sample at least once.
This commit adds handling of such situation for direction finding
in connectionless mode in lower link layer. It includes:
- lack of node_rx_iq_report to store IQ samples,
- lack of free node_rx to report received advertising data (generates
an advertising data report with indication "incomplete, no more to
come" and cancels reception of chained PDUs,
- cancellation of chained PDUs reception due to other scheduling
reasons.
In all of these situations CTE reception must be enabled and number of
received CTEs is smaller than requested by Host.
If there is not sufficient number of node_rx_iq_report nodes and
report was generated, the CTE will not be samples in a given
periodic advertising synchronization event. The CTE will be
sampled again in next event if there are node_rx_iq_report available.
End user applications may check periodic advertising sync event
counter when use of the reports to be sure about sync event
the received report is connected with.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix incorrect use of stream handle instead of connection
handle to enqueue Tx ISO Data, and use stream index to get
stream instance.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implements PDU flow and unittest of CIS Create on Peripheral
Hooks CIS Create into the controller and fixes a few minor
things in ull to allow for running with NEW LLCP
Also handles CONFIG based comilation of CIS Create
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
HCI:
-- Discarded data from HCI ISO Data packets from controller to host if
data has been lost
ISO-AL:
-- Corrected iso_interval in latency calculations
-- Updated handling and release of SDUs for error conditions / padding
at the last PDU for the SDU
-- Updated prioritisation of error status in released PDUs
-- Included error spooling exit on based on payload number to SDU
mapping for unframed reassembly
-- Updated sequence number handling for framed recombination
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Allow the controller to be deinitialized, adding the whole chain of
calls:
- ll_deinit()
- lll_deinit()
- lll_clock_deinit()
in order to be able to turn everything off, including the controller's
refcount of the LF clock.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
- ISO TX data path for HCI and support for vendor path
- ISO-AL segmentation of framed PDUs
- Insertion of segment headers
- Reconstruction and storing of CIG reference point in ULL
- Calculation and insertion of of Time-Offset
- Exit error spooling in ISO-AL on detecting start
- ISO-AL TX unframed fragmentation
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix implementation to be able to establish synchronization
when scan filter accept list is in use and periodic
synchronization needs to be established using specified peer
address or using periodic advertiser list.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This adds support for the following Direct Test mode
commands:
- HCI LE Receiver Test [v3]
- HCI LE Transmitter Test [v3]
- HCI LE Transmitter Test [v4]
Those commands set add a possibility to test an CTE
reception and transmission. The HCI LE Transmitter
Test [v4] commands allows also setting a transmit power.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
Use connection interval units of 1250 us for periodic
scheduling of Extended Advertising auxiliary PDU events so
that auxiliary events can be periodically grouped alongwith
the Periodic Advertising Events. This will permit
mitigating overlaps amongst them.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
- Prevent double callback with ADV re-scheduling
For configurations using CONFIG_BT_CTLR_JIT_SCHEDULING, when last
ADV before initiating connection is re-scheduled with a small delay,
the disabled_cb would be called a second time. This would unexpectedly
invoke a second conn setup with illegal parameters.
To avoid this JIT scheduler phenomenon, clear the ADV disabled_cb
when invoked.
- Add priority to LLL header. This allows the conn priority to be
associated with the object. Used in vendor LLL implementation.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix implementation to limit Periodic Advertising data to a
configurable maximum length when generating HCI reports.
Bluetooth Test Specification defines Scan_Max_Data value
in IXIT. When HCI LE Periodic Advertising Report events are
generated by assembling the chain PDUs, the test cases
expect that if the data length is no more than
Scan_Max_Data, then at least once the IUT shall not
truncate the data in the advertising report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Provides interface, data structures and demuxing capability for ISO RX
PDU allocation and transport from LLL to HCI.
Uses the RXFIFO composite for simplicity and reduced overhead.
Signed-off-by: Morten Priess <mtpr@oticon.com>
In connected mode when Receiving Constant Tone Extensions feature
is enabled, controller shall be able to receive CTE in any
data channel packet.
The commit adds required changes to allow receive of CTE for
all data channel packets in peripheral role.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Update support for Periodic Advertising Synchronization
Receive Enable command, so that PDUs are received so that
contents of Extended Common Payload Format is parsed and
process for information like Channel Map Update and BIGInfo.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor implementation to use a single common ISO PDU
node rx type for ISO Synchronized Receiver.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implement ISO Synchronized Receiver connection handle
representing the streams in the BIG Sync. Add implementation
to return these handles on Sync Established event, and to
release these on Sync Lost.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implement ISO Broadcaster connection handle representing the
streams in the created BIG. Add implementation to return
these handles on BIG complete event, and to release these on
BIG terminate.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implementation of ISO Broadcast data subevents and control
subevent. Implementation of terminate procedure in the
broadcaster side.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implementation of BIG Create Sync in LLL. Generation of
LE BIG Sync Established event and LE BIG Sync Lost event
notifications from the controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to generate the Create BIG Complete
event after the first empty BIS PDU has been transmitted.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Pushes all work done in the topic-ble-llcp branch into main branch
This is a refactoring of the LL control procedures; the refactored
control procedures are hidden behind a KConfig option and
per default disabled
Goal of the refactoring:
close issue Link Layer Control Procedure overhaul #15256
make it easier to add/update control procedures
Refactoring consists in principal of writing explicit state machines
for the control procedures.
To reduce the risk of regression errors unit-tests have been added
Following control procedures are implemented:
Connection update procedure
Channel map update procedure
Encryption procedure
Feature exchange procedure
Version exchange procedure
ACL termination procedure
Connection parameters request procedure
LE Ping procedure
Data Length Update procedure
PHY update procedure
Min. nr. Of channels used procedure
Constant Tone extension request procedure
This is a joined work by the people listed in the signed-off-by
list (in alphabetical order)
Signed-off-by: Andries Kruithof Andries.Kruithof@nordicsemi.no
Signed-off-by: Erik Brockhoff erbr@oticon.com
Signed-off-by: Piotr Pryga piotr.pryga@nordicsemi.no
Signed-off-by: Szymon Janc szymon.janc@codecoup.pl
Signed-off-by: Thomas Ebert Hansen thoh@oticon.com
Signed-off-by: Tommie Skriver tosk@demant.com
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Fix Periodic Advertising Synchronize implementation to
generate Synchronization Failed to be Established event
when 6 AUX_SYNC_IND PDUs are not received when establishing
synchronization.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implement setting the correct directed advertisers address
type in the Extended Advertising Report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix BT_CTLR_LOW_LAT_ULL_DONE synchronization counting so
that done events are processed before pipeline enqueue
decisions are taken in LLL.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The filtering of periodic advertisements by scanner may be not needed
in certain situations e.g. while use of periodic advertising by BT ISO.
To make the code smaller and avoid execution of not needed code the
functionality will be conditionally compilable. It may be enabled
or disabled by use of CONFIG_BT_CTLR_SYNC_PERIODIC_CTE_TYPE_FILTERING
Kconfig option.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
First implementation of periodic advertising sync filtering
requires existence of Direction Finding Extension in Radio
peripheral.
To add the filtering support for other Nodric SOCs software
based PDU traversing for CTEInfo should be implemented.
In case there is no DFE in Radio peripheral, actual filtering
is done in ULL.
The commit provides necessary changes to previous solution.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Periodic advertisement synchronization may be filtered by CTE type.
If particular CTE type is not allowed then depening on filtering policy:
- if filtering policy is off synchronization if terminated
- if filtering policy is on synchronization is continued to
synchonize with another device from allowed adverisements list.
If synchronization is established and peer device changes CTE type
to one that is not allowed, synchronization should be maintained.
There are two new execution paths. First one is executed when
synchronization is created. In this case CTEILINE is enabled
to parse PDU for CTEInfo field. In this execution path CTE
type is verified. Second execution path does not include
parsing PDU for CTEInfo and verification of CTE type.
Information about sync allowed is added to node_rx instance
that transports received PDU data. In case the sync has to be
terminated the node_rx will not hold PDU data.
Also done event is extended with information about sync
termination if CTE type is not allowed and filtering
policy is off.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
If one of AUX_CHAIN_IND is not received properly we need to send an
extra report over HCI to indicate that data are incomplete.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Periodic advertising PDUs are now dispatched immediately one by one
(i.e. without list of PDUs as when flushed from aux context) so we
do not need to iterate such a list.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
