Any places that checked for GTBS is now always enabled
as GTBS is mandatory to support, and the Kconfig option
was removed.
Also removed a duplicate Kconfig option for TBS,
BT_TBS_SERVICE_COUNT, as it was unused.
The other Kconfig option BT_TBS_BEARER_COUNT is used
instead exclusively to set it if needed.
Since GTBS can now exist alone, it must also
support having its own calls and other values.
This means that the GTBS and TBS instances now share
the same underlying struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move the network buffer header file from zephyr/net/buf.h to
zephyr/net_buf.h as the implementation now lives outside of the networking
subsystem.
Add (deprecated) zephyr/net/buf.h header to maintain compatibility with old
file path.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The function took the uri as a `char *` but is in fact
not a null terminated string so change the type to uint8_t *.
Add a check fro uri_len == 0 before doing uri_len - 1
Changed the found check to just check the first octet rather
than the more costly strlen.
Fixed the type of the iterator
Add a break in the loop as we only need to find one ":"
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The function had marked the type as char *, but it was in fact
not a string but rather a uint8_t array.
Marked the type properly and added a cast when using it with
bt_tbs_remote_incoming.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The function had marked the type as char *, but it was in fact
not a string but rather a uint8_t array.
Marked the type properly and added a cast when using it with
strings.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
TBS had 2 cases where 16-bit values were not properly
converted to LE before being sent over air.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
BT_TBS_TECHNOLOGY_IP is not a valid technology value
for TBS since it's not defined by the spec.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds, removes and modifies includes in all LE audio
files.
Fixes any found spelling mistakes as well.
Fixes a few places where incorrect types were used.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
use the function utf8_lcpy to ensure that UTF8 encoded strings are
properly copied and NULL terminated.
Fixes#42128
Signed-off-by: Ping Wang <pinw@demant.com>
This removes duplicated code by adding helper functions to allocate
and free bt_tbs_call objects.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Simplify the function flow, by sending the signal strength notification
in one place, the reporting_interval_work handler.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Changes of call state were not notified. Fixed by calling notify_calls
in respective functions.
Signed-off-by: Lukas Streitenberger <lukas.streitenberger@wsa.com>
The device model was not used for anything useful, only to call some
init code. Change to SYS_INIT instead.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
This fixes possible buffer overflow that may happen when `buf->len`
equals `buf->size` while adding null terminator.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This fixes setting invalid List_Item_Length in Current Calls List.
The fix complements 9c7ef8e.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
When calling the `terminate_call` the `inst` would always be NULL
as we had just terminated the call that we attempted to look up.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When notify_app is called for BT_TBS_CALL_OPCODE_TERMINATE
we did a lookup on the call index, but never did a NULL check
before dereferecing it.
This does not fix the issue that the instance will always
be NULL in this case, as we have terminated the call so
we cannot possibly look up the call afterwards.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The friendly copy always assumed that the friendly name could
fit in memory, which could cause overflows. Fixed by using
utf8_lcpy as that not only ensures that the copy is truncated
to fit in memory, but also ensures that it is null terminated
and truncated in a way that supports multi-byte UTF8 characters.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Clean up occurrences of "#if IS_ENABLED(CONFIG_FOO)" an replace
with classical "#if defined(CONFIG_FOO)".
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The `bluetooth/common/log.h` and `bluetooth/common/log.c` files have been
removed. Files that were using them have been updated to use
`zephyr/logging/log.h` instead.
Those replacement have been done consequently:
- `/BT_DBG/LOG_DBG/`
- `/BT_ERR/LOG_ERR/`
- `/BT_WARN/LOG_WRN/`
- `/BT_INFO/LOG_INF/`
- `/BT_HEXDUMP_DBG/LOG_HEXDUMP_DBG/`
- `/BT_DBG_OBJ_ID/LOG_DBG_OBJ_ID/`
Also, some files were relying on the `common/log.h` include to include
`zephyr/bluetooth/hci.h`, in those cases the include of `hci.h` has
been added.
For files that were including `common/log.h` but not using any logs,
the include has been removed and not replaced.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Replace unnecessary `BT_HEXDUMP_DBG` with `LOG_HEXDUMP_DBG`.
`BT_HEXDUMP_DBG` did an extra cast to `const uint8_t *` on its first
argument. This was probably the reason it was introduced. But the
current definition of `LOG_HEXDUMP_DBG` does this cast for us.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The LE Audio related profiles define specific security requirements that
client have to met to gain access to related characteristics. This
introduces internal wrapper API for GATT characteristics and CCC
descriptors to ensure the security.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In order to bring consistency in-tree, migrate all subsystems code to
the new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add the telephone bearer service server implementation.
This support multiple service instances as well as the
generic telephone bearer service, but is still a work in
progress and should be treated as such.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
