Updates the linker script fragments under 'samples' to use
Z_LINK_ITERABLE_SUBALIGN for the subalignment instead of
a hardcoded value of 4.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Change the sample applications that use network socket API to
use the POSIX_API config because the NET_SOCKETS_POSIX_NAMES is
deprecated. Convert also the zsock_ API calls to plain BSD
socket API calls when applicable.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update coap_service_send and coap_resource_send to take an optional
pointer argument to the newly introduced coap_transmission_parameters.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
In preparation of migrating to net_mgmt events, we need to remove
the observer event callback handler.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
* In the sample doc, replace native_posix references with native_sim
* Provide overlays for native_sim
* Enable native_sim in the sample yaml
* Remove native_posix from the sample yaml platform_allow as it was
filtered out by the host libC
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Instead of forcing use of NEWLIB_LIBC, select any available complete C
library implementation. Add CONFIG_REQUIRES_FLOAT_PRINTF and adjust
CONFIG_LIBC_MALLOC_ARENA_SIZE as needed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Use the new code-sample directive and roles to document the networking
samples so that they show up as "Related samples" when browsing the
various relevant networking APIs.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Use 64bit timestamps from k_uptime_get() so they don't
roll over during the expected device lifetime.
Fixes#60826
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
As both C and C++ standards require applications running under an OS to
return 'int', adapt that for Zephyr to align with those standard. This also
eliminates errors when building with clang when not using -ffreestanding,
and reduces the need for compiler flags to silence warnings for both clang
and gcc.
Most of these changes were automated using coccinelle with the following
script:
@@
@@
- void
+ int
main(...) {
...
- return;
+ return 0;
...
}
Approximately 40 files had to be edited by hand as coccinelle was unable to
fix them.
Signed-off-by: Keith Packard <keithp@keithp.com>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Logging v1 has been removed and log_strdup wrapper function is no
longer needed. Removing the function and its use in the tree.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In order to bring consistency in-tree, migrate all samples to the use
the new prefix <zephyr/...>. Note that the conversion has been scripted:
```python
from pathlib import Path
import re
EXTENSIONS = ("c", "h", "cpp", "rst")
for p in Path(".").glob("samples/**/*"):
if not p.is_file() or p.suffix and p.suffix[1:] not in EXTENSIONS:
continue
content = ""
with open(p) as f:
for line in f:
m = re.match(r"^(.*)#include <(.*)>(.*)$", line)
if (m and
not m.group(2).startswith("zephyr/") and
(Path(".") / "include" / "zephyr" / m.group(2)).exists()):
content += (
m.group(1) +
"#include <zephyr/" + m.group(2) +">" +
m.group(3) + "\n"
)
else:
content += line
with open(p, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add support for both Observe cancellation methods - empty Reset reply
(in place of ACK) and GET message with Observe option set to 1.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The documentation of the sample refers IPv6 instead of IPv4.
Additionally, the coexisting coap_client sample also uses IPv6 by
default. Therefore, switch the sample default configuration to use IPv6
instead of IPv4.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Finetune coap_server sample parameters for better user experience.
Reduce the maximum retransmission count to release resources earilier in
case client is unreachable and no longer responds. Increase the maximum
number of pending retransmissions, along with the heap size (the buffers
for messages are allocated on a heap), to improve sample responsiveness,
in case multiple unreplied messages are pending retransmission.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case no reply is received for notification message, remove the
corresponsding observer since it's no longer reachable, freeing slot for
another one.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The retransmission handler only increased the retransmission count, w/o
sending the actual message again. Additionally, the next retransmission
time calculation was broken - it did not take into consideration the
time that has already passed since before retransmission, and re-applied
the entire timeout value.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Replace all existing deprecated API with the recommended alternative.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This patch replaces magic numbers with COAP_TOKEN_MAX_LEN value and
removes unnecessary castings of token buffer type.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
RFC 7252 (CoAP) specifies value of the Version (Ver) field in the
protocol header to value 1. This patch defines value of the Version
field to make packet initialization easier. All samples and tests
are updated to use the new COAP_VERSION_1 field when initializing
a CoAP packet.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
This patch introduces COAP_TOKEN_MAX_LEN definition in coap.h file.
This definition replaces magic number across CoAP protocol
implementation and CoAP samples.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
CoAP protocol defines registry of Content-Format option values.
This patch adds this enumeration to coap header file to make it
available to all applications using CoAP protocol. It modifies
code using CoAP service to use new enumeration.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
Introduce retransmission counter to the coap_pending structure. This
allows to simplify the retransmission logic and allows to keep track of
the number of remaining retranmissions.
Additionally, extend the `coap_pending_init()` function with `retries`
parameter, which allows to set the retransmission count individually for
each confirmable transaction.
Fixes#28117
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
some tests configured with CONFIG_NEWLIB_LIBC=y,
it's better to add a filter filter: TOOLCHAIN_HAS_NEWLIB == 1
in those tests yaml file.
Signed-off-by: Watson Zeng <zhiwei@synopsys.com>
Move actual test cases from the run-sample-tests.sh script to
the network samples directory that are supported by Docker based
testing. Each network sample directory that supports Docker testing,
will contain docker-test.sh script that is sourced by the runner
script. The docker-test.sh script will run the test as needed and
then return return value to the runner script.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
After adding 'Multicast group filtering' (commit b7b73d0) server should
join CoAP IPv6 multicast group to accept multicast CoAP messages.
Signed-off-by: Eug Krashtan <eug.krashtan@gmail.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming multiple projects
"NONE" defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names, small, manual adjustments
have been done.
See also 7eabab2f5d ("samples, tests: Use semi-accurate project names")
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry. See parent commit for more details (split from parent for
better readability).
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
