The http_client sample ignored connect() errors and attempted to run
HTTP query even if the connection failed.
Additionally, in case the query failed, the sample called `exit(1)`
directly, causing busy-looping in the sample. This prevented the logger
output from being printed.
Both of those issues made the sample behavior very confusing when it
encountered connection problems. The sample did not print any output at
all (due to busy looping) or printed several connect failures (due to
ignoring connect() results). This commit fixes those problems.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Enabled Network shell and Ethernet L2 interface
with XGMAC driver in CLI application
Enabled MDIO shelll with dwcxgmac mdio driver.
Enabled TCP and UDP over IPV4.
Added intel_socfpga socdk support for echo_client and
echo_server sample applications.
Signed-off-by: Santosh Male <santosh.male@intel.com>
Updates references to the net-tools project to refer to the correct
placement of net-tools under tools.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
IPPROTO_IPV6 option was set on TCP socket (besides doing it already in
tcp.c) instead of UDP. Fix that.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Low throughput links (e.g. IEEE 802.15.4) require additional stack and
buffering resources. Therefore some stack and buffer pool sizes were
increased to cater for over-the-air scenarios.
Fixes: #77287
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Added a websocket connection sending network statistics to a client, to
demonstrate how this can be used to push data to the client as an
alternative to GET requests triggered by a Javascript timer.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Accept JSON payload including LED number and state, to demonstrate JSON
parsing and allow control of multiple LEDs if the board supports this.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Previously the dynamic resource in the http_server sample simply echo'd
the received data back to the sender. This doesn't demonstrate how the
dynamic handlers would be used in a more typical use case, where the
application may need to wait for the full request before acting on it or
creating a response.
Therefore two new dynamic resources have bee added: a '/led' resource
which can be used to control the board's LED (if present) via a POST
request, and a '/uptime' resource which can be used to query the kernel
uptime via a GET request.
The static resources are updated with some javascript to support
demonstrating the new dynamic resouces via a web browser.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Added a sample application demonstrating how to use the coap_client API
to download a resource via GET request.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
As found in PR #75525, we should not modify the polled fd array
in multiple places. Because of this fix, the async version of
the socket service could start to trigger while it is being handled
by the async handler. This basically means that the async version
cannot work as intended so remove its support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The txtime can be run manually with qemu_x86 but it is enough
to have native_sim compiled with twister.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When setting boolean options using setsockopt(), the option
type should be int as the size of the option type is checked
and only int is accepted.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Recent POSIX changes caused that 3 file descriptors are now preallocated
for stdin/out/err. This caused file descriptor shortage in all-in TLS
configuration of the sample, hence increase the maximum FD count.
In the server sample this manifested itself as an accept() error. This
triggered a busy loop though in the sample, as in case of accept()
errors it'd just try again w/o any delay. This made this issue hard to
investigate, so to avoid such cases in the future, make the accept()
failure fatal in the echo_server sample.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Echo samples exchange data fragments longer than the default DTLS max
fragment length introduced in commit
f033cd5601. Hence, need to increase this
config value for the sample.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Commit 3046e95d85 introduced eventfd use
in the sample, increasing the pollfd array size, however the config
indicating maximum number of monitored events remained intact, so the
sample didn't really work.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
net_mgmt sockets do not implement internal queue but use
net_mgmt_event_wait() internally to receive events. As a consequence,
in case of events burst, some events may be lost if the receiving
thread has lower priority than the net_mgmt thread.
This was visible in the sample, where only DAD event was reported
properly, as IPv6 Add/Remove events were triggered in pair with
corresponding multicast events (from solicited-node multicast
address).
We can mitigate this by increasing main thread priority to be at the
same priority as net_mgmt thread, so that the receiving thread (main)
has a chance to run in between event reports.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
After enabled POSIX_API in the sample, not all headers were included in
the build due to #ifdefs around header inclusions. This commit fixes
this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Achieve proper syntax highlighting using "console"
language when command snippets start with a prompt.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
The sample won't build with PSA crypto enabled on non-secure platform,
causing disturbances in the CI.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A few samples were not limiting the CI execution scope in any reasonable
way, they should at least limit the execution to platforms that support
netif capability.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The POSIX_MAX_FDS option does not correspond to any standard
POSIX option. It was used to define the size of the file
descriptor table, which is by no means exclusively used by
POSIX (also net, fs, ...).
POSIX_MAX_FDS is being deprecated in order to ensure that
Zephyr's POSIX Kconfig variables correspond to those defined in
the specification, as of IEEE 1003.1-2017. Namely,
POSIX_OPEN_MAX. CONFIG_POSIX_MAX_OPEN_FILES is being deprecated
for the same reason.
To mitigate any possible layering violations, that option is
not user selectable. It tracks the newly added
CONFIG_ZVFS_OPEN_MAX option, which is native to Zephyr.
With this deprecation, we introduce the following Kconfig
options that map directly to standard POSIX Option Groups by
simply removing "CONFIG_":
* CONFIG_POSIX_DEVICE_IO
Similarly, with this deprecation, we introduce the following
Kconfig options that map directly to standard POSIX Options by
simply removing "CONFIG":
* CONFIG_POSIX_OPEN_MAX
In order to maintain parity with the current feature set, we
introduce the following Kconfig options.
* CONFIG_POSIX_DEVICE_IO_ALIAS_CLOSE
* CONFIG_POSIX_DEVICE_IO_ALIAS_OPEN
* CONFIG_POSIX_DEVICE_IO_ALIAS_READ
* CONFIG_POSIX_DEVICE_IO_ALIAS_WRITE
Gate open(), close(), read(), and write() via the
CONFIG_POSIX_DEVICE_IO Kconfig option and move
implementations into device_io.c, to be conformant with the
spec.
Lastly, stage function names for upcoming ZVFS work, to be
completed as part of the LTSv3 Roadmap (e.g. zvfs_open(), ..).
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
In an effort to shave off code size, remove out-of-the-box
enabling of crypto features (except SHA-256).
Configurations are adjusted to enable what they need.
Bonuses:
- When enabled, AES now defaults to using a smaller version
(`CONFIG_MBEDTLS_AES_ROM_TABLES` isn't default enabled anymore,
and if enabled, `CONFIG_MBEDTLS_AES_FEWER_TABLES` defaults to y).
- Conditions around Mbed TLS Kconfig options have been improved
to reflect the reality of the dependencies.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
In order to be compatible with Linux AF_PACKET socket calls, the
protocol field needs to be in network byte order.
So for example, if user wants to receive all packets, then the
protocol field needs to be set as "htons(ETH_P_ALL)".
See Linux manual page at
https://www.man7.org/linux/man-pages/man7/packet.7.html
for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Socket service library uses eventfd, which does not work with
native_posix platform, hence need to exclude it from samples that now
rely on socket services.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
CONFIG_POSIX_API depends on !CONFIG_NATIVE_APPLICATION, which is
incompatible with the native_posix platforms.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Remove the `_MAC` part because those Kconfig options enable only hash
algorithms, nothing MAC-related, and the `_ENABLED` part to align the
naming to the Mbed TLS defines (plus we don't need such a part).
As a bonus, enabling SHA-256 does not automatically enable SHA-224
anymore.
See the migration guide entries for more details on the practical
changes.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Because of changes in other network header files, the net_if.h
was not included so add it directly to the echo-client and
mqtt_azure sources.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Improve navigability in the documentation by adding a link to the main
HTTP Server documentation page to the HTTP Server sample.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This sample assumes that two separate sockets can be bound on IPv4 and
IPv6. On Linux (via Native Simulator Offloaded Sockets) this is possible
when there is no IPv4 to IPv6 mapping. Same can be true to other offloaded
sockets.
CONFIG_NET_IPV4_MAPPING_TO_IPV6 is disabled for this sample, so IPv4 to
IPv6 mapping is disabled for Zephyr native IPv6 layer. For offloaded
sockets this option does not define whether mapping is enabled or not, so
try to unconditionally (and without error checking) disable it.
This patch fixes compatibility with NSOS, since two separate sockets can be
bound on the same address and port, one for IPv4 and second for IPv6.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Add documentation page for HTTP server functionality.
Rename existing HTTP documentation to HTTP client, as it only covers the
client library.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Do not print progress report so that makes debugging things
a lot harder. It is still possible to enable printouts if needed
by setting PRINT_PROGRESS symbol.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If the IPv6 address that our socket is bound to deprecates, then
re-create the socket so that we avoid using deprecated IPv6 address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
