Add Kconfig-to-nrfx symbol redefinitions so that PWM instances
found on nRF54H20 and nRF54L15 devices are supported.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Add nrfx_grtc related entries that were introduced in nrfx 3.4.0,
especially NRFX_GRTC_CONFIG_AUTOSTART that should be by default
set to 1.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Comment out mbedtls symbols that do not have a proper Kconfig
setting. Future commits will need to add relevant support in mbedtls
side to provided needed symbols so that they can be used in hostap
and uncomment these.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
To cater for different needs add an configuration options for WPA
supplicant network selection (scan results sorting). The default is
still left unchanged.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If user selects a band, then we should restrict scanning channels to
that band, but using freq_list will only filter the results.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Make sure to copy LEN -1 bytes to the destination, to
accommodate the terminating null byte.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Even if the interface is not in connected state, allow disconnect to be
accepted, this behaviour regressed when the mode check was introduced
and if not connected then SSID will be NULL.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If MbedTLS uses its own heap which is a static heap (not libc heap),
then WPA supplicant heap usage will come down, so, reduce 8K (minimum
MbedTLS heap for Wi-Fi) from the libc heap size.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Free the deep copied data of the association response event.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Using a macro here that can potentially limit the interface name
compared to add can lead to issues, so, to mimic what we do in add, use
the sizeof with a boundary check.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
These were missed earlier, and if event send fails, no point in waiting
for the state to change.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Due to AP-MLME being in the host and expensive computation WPA3 is not
working reliably, so, for now this is being disabled.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
SAP mode adds more functionality that increases the heap usage, based on
experiments, 40000 works well to avoid startup failures.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Now that TX status buffer is allocated on heap by Zephyr driver, free
the buffer once its processed.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
For WPA_SUPP_CRYPTO_LEGACY, MBEDTLS_PKCS5_C is needed.
Signed-off-by: Vidar Lillebø <vidar.lillebo@nordicsemi.no>
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add missing MBEDTLS_PK_C dependcy for legacy crypto.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Key management for SAP should be retrieved from the network block rather
than using the per-interface global structure.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
By default (-1) libc uses all the available heap, this is good to
efficiently use the RAM, but for scenarios which there isn't enough RAM
the build will be success, but we see runtime failures.
Reserved the necessary RAM based on tests ahead to catch such scenarios,
of course this would mean that we might be no using full RAM in case
more is left, but that's never the case the with Wi-Fi :).
And this also adds the constant evaluation and fine tuneing like we do
for kernel heap and other parameters.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The timeout should be 5s, not 50s. Fix and rename the variables to
better reflect their meaning.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The code was assigning a pointer to a scoped buffer to
an object outside that scope. This would cause the driver
would receive garbage instead of a well-formatted IE and
would likely reject the IE. This in turn caused CSL IE
not being included in enhanced ACKs (verified with
wireshark).
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
When kernel stack is defined as an array, K_KERNEL_STACK_LEN()
is used to calculate the size for each stack in the array.
However, standalone kernel stack has its size calculated by
Z_KERNEL_STACK_SIZE_ADJUST() instead. Depending on the arch
alignment requirement, they may not be the same... which
could cause some confusions. So align them both to use
K_KERNEL_STACK_LEN().
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
NRFX_IRQ_PRIORITY_SET is defined as empty. This causes an unused
argument warning in many callers (e.g. nrfy_gpiote_int_init). Fix it by
using ARG_UNUSED for the priority argument.
Signed-off-by: Marco Widmer <marco.widmer@bytesatwork.ch>
We will touch these lines in the next commit. Convert the comment style
to C89 instead of C99 and the indentation to tabs instead of spaces.
Signed-off-by: Marco Widmer <marco.widmer@bytesatwork.ch>
The core driver ETHOSU_LOG_SEVERITY CMake variable is a cache variable,
and thus will not be configured by the ETHOSU_LOG_SEVERITY CMake
variable of the hal_ethos_u module with local scope.
Change ETHOSU_LOG_SEVERITY local variable to be a cache var.
In addition, change condition test from LESS_EQUAL to LESS in order
to prevent an out-of-range index when accessing list variable.
Signed-off-by: Ledion Daja <ledion.daja@arm.com>
The PSA is referring to Kconfig symbols that are only found
in Nordic downstream repo so we cannot use it anyway atm.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This avoid compliance warning
Found pointless 'menuconfig' symbols without children. Use regular 'config'
symbols instead. See
https://docs.zephyrproject.org/latest/build/kconfig/tips.html#menuconfig-symbols.
WIFI_NM_WPA_SUPPLICANT modules/hostap/Kconfig:8
WIFI_NM_WPA_SUPPLICANT modules/hostap/Kconfig:8
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The big cherry-picking left some invalid code so remove/fix
it in order to pass the compilation.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Due to a typo, channel and frequency were compared causing the
connection to fail for any combination.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Use the WPA cli command to disconnect a station in AP mode.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The WPA version was only been set for WPA-PSK and WPA2-PSK, but for
others it wasn't set. For AP mode this causes issues as WPA-IE is
considered and WPA3/WPA2-PSK-256 aren't allowed, they need RSN.
Explicitly set the version for all to RSN, except for WPA-PSK.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
For AP we should use the security mode from the SSID as stations can
have a different security than the configure one. E.g., WPA/WPA2 in AP
vs WPA in STA1 and WPA2 in STA2.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
If the interface is in associated state, then current SSID will always
be set, so, add an early check and use SSID info freely after that.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This way we reject disconnect in AP mode and ap disable in STA mode,
though both have same functionality we treat them differently to keep
it clean.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
These are to intimate the applications about connected Stations.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
These events are used by AP mode, tied to AP-ENABLED and AP-DISABLED
events in the hostapd/wpa_supplicant.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
These can be abstracted from the core WPA supplicant.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The management frame structure in the WPA supplicant only has a pointer,
so, it need a deep-copy before passing it to WPA supplicant, else driver
ends up freeing causing invalid memory contents.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
RSSI should only be retrieved for STA mode, but the check was wrong.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The keyword is added into array argv of wpa_cli.
The commands which require to be interactive
this keyword will allow ro print output for them.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
Before starting AP mode, we don't need to search for existing networks
and join them, as the use-case is starting SoftAP.
This speeds up the AP mode operation significantly.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
RSSI is only applicable for STA mode, as for AP there are multiple
peers. This causes failure and unnecessary delay, so just skip the
retrieval.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If user enables AP mode, make sure CONFIG_AP symbol
is enabled so that access point sources get compiled etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
WPA supplicant handle is not used anymore.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This prepares for the upcoming AP mode support and moves re-usable code
to a common helper function.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
These were missed in the original support.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of assuming that the array is perfectly aligned with enum, moved
to a data driven design, this decouples from the enum numbering and also
helps avoid repetition of the event string while parsing.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This is a implementation gap and shouldn't be exposed to customers.
But when we run with debug it still helps to identify any important
events that are not handled.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Use the newly added enumerations to translate from WPA supplicant status
codes to Zephyr Wi-Fi management status codes.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Use the newly added enumerations to translate from WPA supplicant status
codes to Zephyr Wi-Fi management status codes.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Using "%02x" needs an unsigned integer, but all MAC addresses use
"unsigned char/char" as the data type, so, to avoid warnings, use a
temporary array.
Also, the macro from the WPA supplicant doesn't use the address of the
array element and causes warnings, so re-define the macro with address
of the element.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If the WPA supplicant internal event has a MAC address, and the sample
is compiled with newlib-nano then then the parsing fails because of lack
of support for C99 formatting options in nano [1].
Fix this by using supported specifier, even the code that encodes the
message uses the same format specifier.
[1] - https://docs.zephyrproject.org/latest/develop/languages/c/newlib.html#formatted-output
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Enabling a network would trigger a scan. Since frequency is being
set after enable_network, first scan is issued without any
specific frequency.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
WPA-PSK was added a bit late, so, it wasn't properly implemented, use
both key management and protocol version to properly handle WPA-PSK in
both connection and also in the status.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
MBO and WMM-AC are mandatory for WFA certification, so cannot be
disabled for memory saving.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
wpa_supplicant has a lot of entries, and it appears in the top-level menu.
Let it be a menuconfig, so that it gets its own menu page with
all the options, instead of expanding in the top-level menu when
selected.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If a user provides both band and channel then check if they are
compatible or not.
Also, move the multiple remove network cleanup to goto.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
By default Wi-Fi works on all bands, so, the band will be unknown, in
which case no need to configure a specific frequency list to WPA
supplicant.
Only when a use provides a specific band then this is needed.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This allows the WPA supplicant to build using the builtin MbedTLS.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If a specific band is configured, automatically fetch and configure the
supported channels.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
For a memory constrained system, basic Wi-Fi is enough, so, add a
configuration option to compiled out advanced Wi-Fi features.
This also supports choosing individual features if needed.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This should solve latency issues with using system workqueue and can now
closely implement the configured timeout.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The macro for crypto has been renamed (and as a choice), so, use the
new macro to see if the crypto has been enabled.
Fixes WPA2/WPA3 association.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This hardly saves flash but helps us in doing PSA port stagewise,
personal first and then enterprise.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Due to a bug in Kconfig, both legacy and PSA crypto were enabled
earlier, so, the dependencies for PSA were missed as they were provided
by legacy.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This set of changes introduces an API to set the channel when
the device is working in independent Monitor or TX injection mode
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This set of changes brings in packet filter API for Monitor and
promiscuous mode operation
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This change provides mode setting API to hostap module.
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The control interface is initialized on every interface add but only
de-initialized on WPA supplicant termination. This leaks all cleanups in
the control interface dei-init.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Enable the PSA key type which enables AES block cipher support.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Fix PSA dependency on random number support.
Random number generated is wanted, instead of a specific PRNG algorithm.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
We need to use PSA MbedTLS template to get entropy working.
Rather than having a single set of options which makes dependency
management tough, have a separate entry for PSA based MbedTLS which
is enabled by for NS variants only.
Also, don't use MbedTLS APIs for entropy, instead use the Zephyr APIs
that can work for both NS and S builds.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The following commits will re-introduce functionality that
the earlier commit removed, so revert the earlier commit.
This reverts commit 64423e269e.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add support for propagating SOC_NRF54LX_DISABLE_FICR_TRIMCNF and
SOC_NRF54LX_SKIP_GLITCHDETECTOR_DISABLE values to nrfx.
Signed-off-by: Magdalena Pastula <magdalena.pastula@nordicsemi.no>
- add new entries that appeared in nrfx 3.4.0
- correct the default IRQ priority value for PPR (it is intended to be
the lowest prority, so unlike for ARM cores, for RISC-V it should be
the lowest value)
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Since the move to HW model v2, the MCUxpresso NXP SDK drivers got
updated during the build due to a missed rename. This caused parallel
builds and CI to become flaky.
This fixes issue #70215.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Fix TF-M support for lpcxpresso55s69 target. The following issues were
resolved:
- lpcxpresso55s69 ns defconfig did not explicitly disable
CONFIG_TRUSTED_EXECUTION_SECURE (which is set in the secure cpu0
defconfig file)
- CONFIG_TFM_BOARD was not being set correctly for the NS target
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Include into compilation the nrfx_gppi_dppi_ppib helper and related
interconnect layers when DPPIC nodes are enabled in DTS. Provide macro
definitions required by those interconnect layers based on information
from devicetree (the nrf_grtc_timer is only modified because a macro
that it uses became more generic).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add Nuvoton numaker series flash memory controller(RMC) with erase,
read & write features of soc-flash.
Signed-off-by: cyliang tw <cyliang@nuvoton.com>
This adds the minimal get_time/set_time support for the rp2040 and
enables support by default on the Pico boards. This doesn't support
configuring the clock source or alarm interrupts yet.
Signed-off-by: Andrew Featherstone <andrew.featherstone@gmail.com>
For use nRF 802.15.4 Radio Driver on nRF54L series there is
necessary update for nrfx_glue.h file. It follows the pattern
used for other nRF family members.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
Add support for LVGL rounder callback function. Sometimes,
either the underlying display controller and/or the LCD host
controller might impose restrictions on frame resolution.
For instance, the E1394AA65A display model should impose that
either axis of a frame be multiple of 2 pixels or the Renesas
LCD controller of the DA1469x SoC, should impose that the
stride value, number of bytes between consecutive frame lines,
be multiple of 4 bytes.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
The __WEAK-tagged function `nrf_802154_clock_hfclk_ready` is removed.
The implementation is provided by the nRF 802.15.4 Radio Driver.
Existence of __WEAK-tagged version causes incorrect behavior when
Link Time Optimization is used.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
This new version is required to handle the upcoming IPC-related DT
structure (i.e. BELLBOARD/VEVIF).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The TF-M crypto modules got renames from CRYPTO_XXX_MODULE_DISABLED to
CRYPTO_XXX_MODULE_ENABLED
Therefore also re naming it in zephyr build integration.
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
QCBOR is only needed by the TF-M tests, as they are not build
separately due to the TF-M split build.
If we still set it there is a CMake build warning.
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
Compilation error "undefined reference to log_const_lvgl"
happened in lvgl_keypad_input.c when trying to get logs with
lvgl keypad module. Fixed by adding log level parameter
in log module macro.
Signed-off-by: Eve Redero <eve.redero@gmail.com>
Add a Kconfig option for enabling `MBEDTLS_PLATFORM_ZEROIZE_ALT`, which
is required if the mbed backend already provides an implementation.
For example, the Nordic cryptocell precompiled backends.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add nrfx configuration file to make the nrfx HAL work for
nRF54H PPR core.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Extend Kconfig definitions and nrfx_config translations so that UARTE
instances that are available in nRF54H20 can be used.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
nrf-regtool is a Python utility from Nordic Semiconductor, which is used
for generating binary files with register values for given peripherals.
It sources the descriptions of peripheral registers from CMSIS-SVD files
(typically ones bundled with nRF MDK).
For some peripherals, such as UICR, nrf-regtool supports parsing values
from devicetree as well, based on the bindings already found in Zephyr.
Currently, this tool is not submitted as a script to Zephyr, but it can
be installed from PyPI.
Having nrf-regtool installed is recommended when working with nRF54H20.
Booting the Application or Radiocore CPU requires flashing not only its
firmware, but also its respective UICR instance. On this SoC, the UICR
is used to assign ownership of global hardware resources, including
memory and peripherals, to individual cores. The Zephyr build system can
call nrf-regtool to generate the UICR based on devicetree, to reflect
the boot-time hardware configuration required for a given application.
The generated `uicr.hex` is then merged with `zephyr.hex`, so that they
can be flashed together using west.
The build system integration takes the form of a CMake package, which
includes a version check and reusable components; over time, some of
these components can be reused by sysbuild. This package is located in
the `hal_nordic` module, because it depends on the `SOC_SVD_FILE` CMake
variable, which is defined there as well.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
This CMake variable contains a path to a CMSIS-SVD file from nRF MDK,
which describes the selected Nordic SoC.
Initially, this will be used as an argument to nrf-regtool.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Add nrfx and Kconfig related infrastructure plus SoC initialization
code to allow building for nRF54H20 targets (Application and Radio
cores).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Move code that prepares `NRFX_CONFIG_GRTC_*` definitions based on
information from devicetree from the nRF54L15 nrfx_config header
to the global one, so that the code can be used by nRF54H20, too.
The checks that validate owned-channels and child-owned-channels
DT properties are moved to the nrf_grtc_timer driver so that
the global nrfx_config is not polluted unnecessarily.
The default values in nrfx_config_nrf54l15_enga_application.h
are restored to those from the corresponding template file.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
... to cover missing __ICACHE_PRESENT and __DCACHE_PRESENT symbols that
should be defined in MDK files.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Re-add finer grained compilation control that was lost in the CMSIS
split (#56957). CMSIS DSP is several hundred files and has a measurable
effect on compile times.
Only compiling features that are required improves this.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Adds CAN drivers for XMC4xxx SoCs.
XMC4xxx has multiple CAN nodes. The nodes share a common clock and
a message object pool.
The CAN nodes do not have a loopback mode. Instead there is an
internal bus which can be used to exchange messages between
nodes on the SoC. For this reason tests/samples which rely on the
loopback feature have been disabled.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Some crypto Kconfig options were commented out, so remove them.
These will be re-introduced later when adding crypto support
properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Compliance checker does not allow compile definitions without
a Kconfig option. So add dummy values for time being. These should
be removed at some point and replaced with properly namespaced
options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Zephyr compliance checker does not like macros that have control
structures like goto. So change the macro to align with this rule.
Also rename the macro and remove the __ prefix as it not needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Zephyr requires that the name of the variable is not the
same as the struct as seen by this warning:
modules/hostap/src/supp_api.c:64:WARNING:
Violation to rule 5.7 (Tag name should be unique)
tag: wpa_supp_api_ctrl
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If the DHCPv4 is disabled, then avoid linking warning about
missing DHCPv4 functions. Also include dhcpv4.h so that the
DHCPv4 function prototypes are found by the zephyr supplicant
driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Changed the names of the API functions between wpa_supplicant
and Zephyr upper layers. For example replaced the z_ prefix
by zephyr_ as the z_ is only meant for internal kernel
functions.
Changed the wpa_supplicant startup so that we do not poll
but wait the network interface add event which then adds
the network interfaces to the supplicant.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
There is no need to hide the wpa_supplicant interface
struct so add it directly to net_wifi_mgmt_offload struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add new files from hostap to Zephyr build.
Add wifi mgmt thread that communicates with supplicant.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Both zcbor_encode.c & zcbor_decode.c use strnlen()
In general these 2 functions are only exposed by the C library
if _POSIX_C_SOURCE is set 200809L.
But neither of these files (or their build scripts), are setting
this macro, causing build warnings
Implicit declaration of function ‘strnlen’
which turn into failures in CI with some libCs.
Let's set this macro to avoid this issue.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
`struct ieee802154_config config` is a struct containing an
union. Members of `config` were accessed incorrectly in
`otPlatRadioEnableCsl`. Fix by initializing `config` with `0`
and accessing one member at a time.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
- In `set_vendor_ie_header_lm`, case when
`link_metrics_data_len == 0` has been ignored.
This commit fixes that by setting `header_ie->length = 0`
before returning.
- current implementation of enh ACK header IE returns
`-ENOTSUP` when `ack_ie.header_ie == NULL` or
`ack_ie.header_ie->length == 0`. This commit fixes that by
refactoring checks in `nrf5_configure`.
Co-authored-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
According to PSA specification in case of `PSA_KEY_TYPE_ECC_KEY_PAIR`
function `psa_import_key` takes private key from key pair as argument.
This commit adds extraction of Private key from ECDSA key pair.
Also removes not needed `otPlatCryptoEcdsaGetPublicKey`.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
A growing number of CAN controllers do not have support for individual RX
hardware filters based on the Remote Transmission Request (RTR) bit. This
leads to various work-arounds on the driver level mixing hardware and
software filtering.
As the use of RTR frames is discouraged by CAN in Automation (CiA) - and
not even supported by newer standards, e.g. CAN FD - this often leads to
unnecessary overhead, added complexity, and worst-case to non-portable
behavior between various CAN controller drivers.
Instead, move to a simpler approach where the ability to accept/reject RTR
frames is globally configured via Kconfig. By default, all incoming RTR
frames are rejected at the driver level, a setting which can be supported
in hardware by most in-tree CAN controllers drivers.
Legacy applications or protocol implementations, where RTR reception is
required, can now select CONFIG_CAN_ACCEPT_RTR to accept incoming RTR
frames matching added CAN filters. These applications or protocols will
need to distinguish between RTR and data frames in their respective CAN RX
frame handling routines.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Platforms calculate Link Metrics values internally after using
`otPlatRadioConfigureEnhAckProbing`.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Provide properties for selected TF-M toolchain so that the NS
application will use the same toolchain as TF-M.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
The sample now builds the psa-arch-tests itself and doesn't rely anymore
on the TF-M module CMakeFile.
Additionally it will not run the zephyr main.c anymore but therefore only
uses the tf-m non-secure application.
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
This removed the CMake code that builds the TF-M arch tests within the
TF-M CMakeFile. It will be moved to the tfm_integration/tfm_psa_test
sample CMakeFile.
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
Update the TF-M regression tests sample to build the NS app
in the tf-m-tests repository as an external project.
The regression tests need to provide test configurations to both
TF-M an NS app.
Duplicate configuration done in the spe/CMakeLists.txt to configure
TF-M image for the regression tests.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
TF-M no longer builds the NS app, but exports build files to api_ns
folder and expects the user to build the rest themselves.
Remove the option to build the NS app, and update the TFM_USE_NS_APP
to look for an output hex file in the tfm_ns folder.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
Add build of the NS application in the zephyr defined out-of-tree board
support for the nordic_nrf platform.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
Use TF-M PSA API headers when compiling with TF-M enabled.
Fixes: #43249
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
MbedTLS 3.5.0 requires a implementation of mbedtls_ms_time giving a
time in ms for TLS 1.3
Therefor adding an alternative implementation using zephyrs
k_uptime_get
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
Update install path of tfm_ioctl_api.h, remove include of tfm_api.h
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
The TFM error codes are no longer in the interface headers.
All TF-M functions return PSA status codes, so use this here as well.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
Update source lib and include path for TF-M interface files.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
The platform_ns library is no longer build with the split build anymore
so removing it.
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
The place where TF-M places its non-secure api header files has changed
Therefore changing it for for all applications that use it.
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
When OpenThread application is built with CONFIG_ASSERT
and CONFIG_ASSERT_NO_MSG_INFO, OT_ASSERT() prints a location
that points to the otPlatAssertFail() function instead of
the code that actually failed an assertion.
This is confusing and CONFIG_ASSERT_NO_MSG_INFO sometimes
cannot be disabled because of flash size limitations.
Make otPlatAssertFail() always print the actual assert
location.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Remove two workarounds in OpenThread's PSA crypto backend
that were required when Zephyr used pre-1.5 TF-M version:
1. psa_open_key() is no longer needed to reference
a persistent key
2. psa_cipher_encrypt() can be used to simplify AES
encryption
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
In order to avoid build failures as described in issue #67242,
make all ST drivers using HAL_ST module dependent to HAL_STMEMSC
and HAS_STLIB libs, which need to be configured in all samples
referring to them.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
This commit adds new types of keys and algorithm to crypto_psa backend
of openthread.
Added options:
- `OT_CRYPTO_KEY_TYPE_ECDSA`
- `OT_CRYPTO_KEY_ALG_ECDSA`
- `OT_CRYPTO_KEY_USAGE_VERIFY_HASH`
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
This commit implements `otPlatResetToBootloader` in two ways:
- trigger reset to bootloader using boot mode retention API
- trigger reset to bootloader by triggering GPIO pin (applicable
for nRF52840 Dongle)
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
The macro `NRF_802154_ENERGY_DETECTED_VERSION` is no longer required
because transition of nrf 802154 API is done.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
When building with CONFIG_USB_DEVICE_AUDIO, enable start of frame
notifications from the mcux sdk usb middleware
Signed-off-by: James Zipperer <jzipperer@fb.com>
Instead of using custom SoC definitions. The selected components (e.g.
CMSIS), depend on the architecture selected by the SoC Kconfig options.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Updated API version enables multi-instance GPIOTE driver.
Additionally obsolete symbol that was used to specify
API version in the past was removed.
Affected drivers have been adjusted and appropriate changes
in affected files have been made.
Signed-off-by: Jakub Zymelka <jakub.zymelka@nordicsemi.no>
Added GPIOTE0, GPIOTE1 instances for legacy devices,
GPIOTE20, GPIOTE30 for Moonlight and GPIOTE130,
GPIOTE131 instances for Haltium.
Signed-off-by: Jakub Zymelka <jakub.zymelka@nordicsemi.no>
Added `OT_PLATFORM_POWER_CALIBRATION` and set to always off
as in Zephyr power calibration is handled by Radio Driver.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
Remove `IEEE802154_SELECTIVE_TXPOWER` option.
Cache the tx power value in nRF5 driver and make use of it on each
operation.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
This commit adds a new Kconfig for the nRF 802.15.4 radio driver that
allows the user to specify the number of encryption keys the driver can
simultaneously store.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
There are multiple Kconfig symbols that are only available when the
radio hardware is present. As a result, the nRF 802.15.4 radio driver
is more difficult to configure on multicore architectures. Also, such
solution goes against the principle of hiding the details of the
platform behind the driver's interface.
This commit moves all the Kconfig options that correspond to settings
present in common nRF 802.15.4 configuration header so that they're
available no matter if the API is serialized.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
This commit introduces `kconfig_to_ot_option` to simply fye the way of
adding openthread related kconfigs.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
Introduce possibility to override `NRFX_DIR` sybol from hal_nordic's
CMakeLists.txt file that specifies source dir for the nrfx drivers.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
The LIS2DU12 is a linear 3-axis accelerometer with advanced digital
functions whose MEMS and ASIC have been expressly designed to build
an outstanding ultralow-power architecture in which the anti-aliasing
filter operates with a current consumption among the lowest in the
market.
This driver is based on stmemsc HAL i/f v2.3
https://www.st.com/en/datasheet/lis2du12.pdf
Signed-off-by: Armando Visconti <armando.visconti@st.com>
This commit replaces a magic number in the definition of serialization
ring buffer length with a macro provided by the 802.15.4 driver.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
IEEE 802.15.4-2020 defines four possible values for Key Identifier Mode
field of the Auxiliary Security Header. The current ieee802154 driver
API only supports two of them: b00 and b01. This commit adds support for
the two remaining Key Identifier Mode values. It's done by replacing a
field that can only hold Key Index into a field that can holds a pointer
to the entire Key Identifier field.
See IEEE 802.15.4-2020, sections 9.4.2.3 and 9.4.4 for further reference.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
We follow the path of the header to define the guard, aarch32 was
removed some time ago and the guards still had AARCH32 in them, just
remove it and keep the guard consistent and short.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enforce that the initial attestation partition has the required
initial attestation key provisioned.
If the initial attestation key (IAK) is not present during boot of
TF-M the system will panic during initialization.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Introduce Kconfig option in zephyr build system that reflects the TF-M
cmake config variable with the same default value for dummy provisioning
and have it satisfy the IAK present requirement.
This configuration is not suitable for production, and by having this
in zephyr configuration we can have this as part of the hardened
configuration check.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
build_info.h of mbedtls includes the config file for mbedtls but
also includes check_config.h so its not needed to have it in the
config file
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
Update prompt for profile type not set, make it appear in a similar
way as the rest of the options in the choice.
Add in parethesis "base", which is how this referred to in the upstream
TF-M documentation.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Recent nRF 802.15.4 Radio Driver provides assert abstraction layer.
The assert abstraction layer is implemented in Zephyr in following
ways depending on the `NRF_802154_ASSERT_CHOICE` Kconfig choice.
`NRF_802154_ASSERT_ZEPHYR_MINIMAL` (default) gives ability to still
perform run-time checking of the nRF 802.15.4 Radio Driver operation
with minimum memory overhead and configurable behavior on fault
detection regardless of the `CONFIG_ASSERT` Kconfig option value.
`NRF_802154_ASSERT_ZEPHYR` gives ability to use asserts provided and
configurable by Zephyr including the ability to turn off the run-time
checking of the nRF 802.15.4 Radio Driver operation.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
This commit adds bbtc implementation.
New file in modules/openthread/platform/ble.c
New corresponding kconfig option `OPENTHREAD_BLE_TCAT`.
Co-authored-by: Piotr Jasiński <piotr.jasinski@nordicsemi.no>
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
Signed-off-by: Piotr Jasiński <piotr.jasinski@nordicsemi.no>
This commit bumps openthread commit to `4ed44bc`
and implements `CONFIG_OPENTHREAD_MULTIPAN_RCP` option.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
The TF-M build uses the vanilla CMake FindPython3 mechanism which in
several cases misbehaves, see #24308 for details.
Ensure TF-M build uses same Python interpreter as Zephyr itself.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This change adds checks to validate consistency between Zephyr’s Kconfig
settings and cmsis configuration defined in SiP’s sdk provided headers.
This change also introduces a config to enable cmsis’ own checks which
emits warnings if a parameter relies on auto-populated default values.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Kconfig parameters, header’s default & silicon vendor’s SDK configuration
for CMSIS Core, must be consistent. Depending on the inclusion order of
the headers, this is currently not always the case.
This change introduces consistency checks & enusers defaults match their
Kconfig settings.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Switch BOARD_BL5340_DVK_CPUAPP_NS TF-M board selection from using the
platform support that is built-in to TF-M module, and instead use
the generic nRF5340 cpuapp platform support that all other nrf5340 SoC
related boards use.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The LPS28DFW is an ultracompact, piezoresistive, absolute pressure sensor.
Compared to the LPS22DF, the LPS28DFW is waterproof and has a Dual FS
capability and does not have SPI. This commit extends the LPS22DF driver to
be compatible with the LPS28DFW device.
Signed-off-by: Jonas Remmert <j.remmert@phytec.de>
Nanopb generates header files that need to be available before being
included. This isn't an issue for a target where the files were added
with zephyr_nanopb_sources. But if another target wants to include
these generated files we need a cmake dependency chain.
The nanopb_generated_headers custom target been added for this purpose.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This commit is a part of introduction of new WTD instances.
It adds new Kconfig symbols that can be used in WDT shim and
nrfx driver.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
This commit increases the length of ring buffer that holds serialized
nRF 802.15.4 API calls so that it can simultaneously store all
notifications the driver is capable of issuing. Currently that's not the
case, which creates a possibility of the serialization buffers running
out while the driver is issuing notifications.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Change makes EGU instance used for anomaly 109 workaround configurable.
The default EGU instance (5) may be used for other purpose.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Regular OpenThread upmerge to commit `75694d2`.
Move CONFIG_OPENTHREAD_PLATFORM_KEY_REFERENCES_ENABLE
from header file to Kconfig.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
The Nanopb cmake locates the protoc executable, verify the result
instead of doing it ourselves.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Despite what the TF-M documentation says about SFN model not supporting
Floating Point, it does support it, according to TF-M developers.
Remove SFN limitation not supported with FP Hard ABI.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add MCUBOOT_IMGTOOL_OVERWRITE_ONLY Kconfig option which
passes the --overwrite-only option to imgtool to avoid
adding the swap status area size when calculating overflow.
It is used by non-swap update modes.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
TF-M only suports floating point in IPC model, not the SFN model.
Since floating point is a basic feature of the architecture and TF-M
has the limitation it makes more sense for the dependency to exist in
TF-M and and limit the TF-M model choice instead of limiting the
option to enable floating point.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Changes the default of `LV_Z_VDB_SIZE` to 100 percent if
`LV_Z_FULL_REFRESH` is set. Reason is that LVGL will reset the full
refresh flag if the buffer is not equal to the screen size.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Fixes an issue whereby a rename of a variable type has been
forgotten in an instance, which now uses the correct type name
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Change the default TF-M model for small profile to match the
configuration set in the profile small configuration file.
Otherwise we would be overriding the profile default.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix include order between platform_ns and tfm_api_ns libraries.
platform_ns functions may depend on tfm_api_ns.
This would typically be platform specific IOCTL services added to the
platform_ns library requiring the tfm_platform_ioctl from the
TF-M platform partition exposed in tfm_platform_api.c
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Include the zephyr/dsp/types.h header for float32_t/float64_t type
definitions to avoid conflicts with other subsystems including this header.
Add compile-time asserts to ensure the typedefs meet the requirements of
the CANopenNode module.
Fixes: #63896
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Introduces a Kconfig symbol `LV_Z_LOG_LEVEL` because contrary to Zephyr the
numerical value of log levels in LVGL increases with severity. Also support
for the `LV_LOG_LEVEL_USER` is added.
Resolves issue #64351.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Changes in the macro statements that allows to build
with -Wudef flag enebaled, without errors.
Signed-off-by: Patryk Lipinski <patryk.lipinski@nordicsemi.no>
The LPS22DF is an ultracompact, piezoresistive, absolute pressure sensor
that functions as a digital output barometer. The LPS22DF provides lower
power consumption, achieving lower pressure noise than its predecessor.
This driver is based on stmemsc HAL i/f v2.3
https://www.st.com/en/datasheet/lps22df.pdf
Signed-off-by: Armando Visconti <armando.visconti@st.com>
NXP USB bindings were combined into one binding and using
a property corresponding to HAL enums which is improper use
of devicetree.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Fix indentation to use spaces (instead of tabs) and remove the
unnecessary repetition of the condition inside endif().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Added initial version of Infineon AIROC WIFI driver
Added initial version of binding file for Infineon AIROC WIFI
driver
Rename CONFIG_ABSTRACTION_RTOS_COMPONENT_ZEPHYR to
CONFIG_USE_INFINEON_ABSTRACTION_RTOS
Exclude cy8cproto_062_4343w platform from
drivers.modem.esp_at.build test
Change revision hal_infineon to
69c883d3bd9fac8a18dd8384624b8c472a68d06f
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Added initial version of Infineon CAT1 SDHC/SDIO driver
Added initial version of binding file for Infineon CAT1 SDHC/SDIO
driver
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Rename local usbd copy from nrfx_usbd to nrf_usbd_common and use it in
both USB stacks. Renaming header to nrf_usbd_common.h allows breaking
changes in exposed interface. Mark all doxygen comments as internal
because local usbd copy should not be treated as public interface
because we are under refactoring process that aims to arrive at native
driver and therefore drop nrf_usbd_common in the future.
Use Zephyr constructs directly instead of nrfx glue macros.
No functional changes.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Copy nrfx_usbd code from zephyrproject-rtos/hal_nordic git revision
d054a315eb888ba70e09e5f6decd4097b0276d1f. This enables us to refactor
the code towards a native driver in a step by step manner where the
smallest changes that bring biggest performance improvements are done
early on.
The code is not a vanilla copy from zephyrproject-rtos/hal_nordic.
The code was reformated with clang-format to match project style.
Manual modifications were done to change comments formatting, place
constant comparisons on the right and add blank lines to pass Zephyr
compliance check.
Relicense to Apache 2.0.
No functional changes.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
The LC3 coded requires floating point support in
the C library, so let's select REQUIRES_FULL_LIBC
in the module kconfig, instead of having samples
adding it to their prj.conf
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add choice for BL2 log level configuration.
Silence TF-M BL2 logging when TF-M is configured to be silent.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Moving the Zephyr specific config options from
modules/hostap/Kconfig to corresponding Kconfig where the
option is specified.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Only adds basic build support using Zephyr. Crypto support is disabled
till the MbedTLS integration is complete.
Signed-off-by: Sridhar Nuvusetty <sridhar.nuvusetty@nordicsemi.no>
Signed-off-by: Sachin Kulkarni <sachin.kulkarni@nordicsemi.no>
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
Now it is needed to explicitly use NRF_GPIOTE1 instance
in nrfx_gpiote driver for non-secure builds.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Add generic SoC support for the supported nordic SoCs:
- nrf5340
- nrf9160
- nrf9120
Add generic SoC support by taking board specific configurations from
zephyr devicetree and kconfig.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Exception info dump is a very basic feature so it should IMHO be
enabled by default.
For instance, a simple null-pointer exception in the non-secure app
will not be logged unless this option is enabled.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Uart driver for openthread have been waiting for host to start
communicating with coprocessor, during booting of the Zephyr and
by that blocking start os OS. There is no longer a need for
that since the stack will be soft rebooted after host connects
to coprocessor, removing the need to wait on host communication.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
This change slightly simplifies the configuration of a CSL receiver and
generalized CSL_RX_TIME to EXPECTED_RX_TIME as a re-usable primitive
across several timing-sensitive IEEE 802.15.4 standard sub-protocols
(namely BE-PANs/DSME/CSL/RIT/TSCH).
This API change is based on the rules outlined in RFC #61227.
Fixes: #62918
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Improves standard conformance of the IEEE802154_CONFIG_ENH_ACK_HEADER_IE
option and introduces certain "soft MAC" capabilities around header IEs:
* Introduces types and helpers that allow driver maintainers to
represent, parse, write and validate header IEs.
* Introduces helper functions to access non-aligned fields in header
IEs, namely element IDs.
Updates the only existing L2 and driver pair that uses
IEEE802154_CONFIG_ENH_ACK_HEADER_IE: OpenThread platform radio and nRF5
and improves header IE validation in the nRF5 driver.
This change should help further driver maintainers to support
OpenThread's CSL and vendor IE extensions. It is based on the rules
specified in RFC #61227.
It is also a precondition to generically support both, "soft MAC" and
"hard MAC", approaches to header IEs in the TSCH protocol, namely the
time synchronization IE.
Fixes: #62940
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
"Sleeping" has a well defined meaning in Zephyr related to threading and
power management. This differs from OpenThread's definition:
- Deprecates the "SLEEP_TO_TX" capability as it is redundant and
conflicts with all of Zephyr's nomenclature, #61227, RFC 2863, Thread
standard and IEEE 802.15.4. This binds the API to an implementation
detail of OpenThread, instead. See #63670 for the agreed migration path.
- Renames the "SLEEP" event to "RX_OFF" which conforms to the
nomenclature in Zephyr, this API and IEEE 802.15.4.
Fixes: #62995
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
According to cmake documentation, in the `if(<string>)` expression
the string evaluates to false unless its value is one of the true
constants. Thus, the commands under `if(${uicr_path})` are never
executed. Use `if(DEFINED uicr_path)` instead, since `uicr_path`
is returned by `dt_nodelabel()` and it will be undefined if such
node does not exist.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add option for overriding the maximum number of wait loop iterations for
entering/leaving freeze mode. Set the default to 10000 (as opposed to a
default of 1000 used in the HAL).
Fixes: #56171
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
rand32.h does not make much sense, since the random subsystem
provides more APIs than just getting a random 32 bits value.
Rename it to random.h and get consistently with other
subsystems.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
CONFIG_HAS_MCUX is also selected by ARM64 and XTENSA-based cores
which don't have any CMSIS files. As such, it's wrong to implicitly
select CONFIG_HAS_CMSIS_CORE when CONFIG_HAS_MCUX is selected. Since
the ARM32-based cores implicitly select CONFIG_HAS_CMSIS_CORE there's
no point in CONFIG_HAS_MCUX also selecting it too.
The old approach caused config-related warnings
in external projects such as SOF after the introduction of
Commit '8d5ed53' ("modules: remove uncessary source for
external cmsis kconfig"). The warnings were in the form of:
"HAS_CMSIS_CORE (defined at modules/cmsis/Kconfig:7) has
direct dependencies 0 with value n ..."
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
ethosu_log.h uses the stdout as it's stream for printf. This could
cause an issue where if CONFIG_LOG=n and CONFIG_CONSOLE=y then there
would be no way to control the log level and it would default to debug
level. There is no NONE option as with the way the ethos-u hal is set
up with no way to go below the err level.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
A little refactoring that simplifies dealing with nanosecond timestamp
values in packets and further decouples calling code from PTP:
Benefits:
- simplifies calling code by removing redundant conversions.
- prepares for removing PTP dependencies from net_pkt.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Do not select HAS_CMSIS_CORE for SOC_FAMILY_NXP_ADSP.
This soc family refers to the Audio DSP from i.MX MPU,
which is a HiFi4 core, Xtensa arch.
HAS_CMSIS_CORE is for ARM cores (A, M, R cores) -
see modules/cmsis/Kconfig.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
CMSIS uses an external KConfig so sourcing the KConfig is uncessary. This
also adds a comment if it is not available.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
The names have underscores within them. Somehow it was still being found
within the build but not with building documents. This renames them to
the correct name.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Code using sys_csrand_get should depend on CONFIG_CSPRNG_ENABLED symbol
and not in ENTROPY_HAS_DRIVER since they are not using the entropy
device directly.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The CONFIG_MCUBOOT_BOOTLOADER_MODE_DIRECT_XIP has been missing
select of CONFIG_MCUBOOT_BOOTLOADER_MODE_HAS_NO_DOWNGRADE.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Changes the Kconfig symbols for the sys_heap based memory management option
and removes the notion of `BLOCKS` with a more concise single
`LV_Z_MEM_POOL_SIZE` option. Also adds `LV_MEM_CUSTOM` to the lv_conf.h,
since in any option the memory management is considered to be custom.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Add the MCUBOOT_BOOTLOADER_NO_DOWNGRADE Kconfig option that allows,
when paired with MCUboot mode Kconfig, to indicate that the MCUboot
has been configured with downgrade prevention, which means that only
application with version higher than running can be swapped on next boot.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The commit adds support for uploading image to board with MCUboot
configured with DirectXIP with revert.
It allows to set uploaded image either for test or as permanent
boot application, until newer image gets confirmed.
Note that in DirectXIP with revert MCUboot will remove image
that has not been set for test nor confirmed and MCUmgr does not
set either mode unless image has the mode set within uploaded
binary.
The commit adds Kconfig option
CONFIG_MCUBOOT_BOOTLOADER_MODE_DIRECT_XIP_WITH_REVERT
that enabled the new mode of operation within MCUmgr.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This adds the cmsis-nn module since it moved to its own realm.
This also adds a kconfig for the long short-term memory.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Use CMSIS-DSP from its new realm. This also changes change how you
initialize FFT tables as well to use arm_cfft_init_64_f32 if you
know the FFT size in advance rather than the generic initialization
arm_cfft_init_f32.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Adds CONFIG_STM32_ENABLE_DEBUG_SLEEP_STOP to allow debugger attaching in
sleep/stop mode of STM32 parts. Mainly useful for debugging. Move DBGMCU
from part-sepcific power.c to common soc_config.c. CONFIG_USE_SEGGER_RTT
depends on this as well.
Signed-off-by: Roland Lezuo <roland.lezuo@embedded-solutions.at>
Also set the HAL variant appropriately when building for
the new nrf53_bsim boards.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Adds saving of the last lv_indev_data_t for button and pointer type
devices. This is needed because there is currently no way to tell LVGL in
the read callback that no event is pending. Preservation of the last state
is expected to happen in the port layer for the input devices.
This resolves issue #62512.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
If asserts are disabled, there is a warning in 'otPlatCryptoInit'
regarding unused variable `err`. This commit fixes that.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
Synchronizes with the new upstream RX/TX timestamp definition in
OpenThread based on the standard's SFD.
This change is synchronized with the upstream OpenThread implementation
via west.yml.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Removes the pseudo device prerequisite that the LVGL setup routine has been
executed before initialization. The pseudo devices are now registered at
the end of the LVGL setup routine, the driver is not concerned with
configuring the devices anymore. This also removes the need for enforcing
certain priorities within the same init level.
This resolves issue #62753.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
So that the HAL's system init function configures the reset GPIO as
nRESET if requested by the user.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
If the users configures this option in devicetree, ie,
```
&uicr {
nfct-pins-as-gpios;
};
```
CMake will inject the HAL-specific CONFIG_NFCT_PINS_AS_GPIOS definition,
so that the necessary operations are performed during system init.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Instead of detecting that we are in a native/POSIX arch based
board by checking for each board specifically,
let checks for the architecture.
In that way other boards (like the upcoming nrf53_bsim ones)
will also work.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Introduce a helper function zephyr_nanopb_sources to generate
source files and add these to a target.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Move the conditional compile of CONFIG_ACPI to the beginning of the file
as we currently add compiler include paths to all projects even if
CONFIG_ACPI is not set.
Signed-off-by: Florian La Roche <Florian.LaRoche@gmail.com>
Adds a missing include to avoid these warnings :
- zephyr/modules/fatfs/zfs_ffsystem.c:19:16: warning: implicit declaration
of function 'k_malloc'; did you mean 'ff_memalloc'?
[-Wimplicit-function-declaration]
- zephyr/modules/fatfs/zfs_ffsystem.c:19:16: warning: returning 'int' from
a function with return type 'void *' makes pointer from integer without a
cast [-Wint-conversion]
- zephyr/modules/fatfs/zfs_ffsystem.c:25:9: warning: implicit declaration
of function 'k_free' [-Wimplicit-function-declaration]
Signed-off-by: Johan Lafon <johan.lafon@syslinbit.com>
