The POSIX_MAX_FDS option does not correspond to any standard
POSIX option. It was used to define the size of the file
descriptor table, which is by no means exclusively used by
POSIX (also net, fs, ...).
POSIX_MAX_FDS is being deprecated in order to ensure that
Zephyr's POSIX Kconfig variables correspond to those defined in
the specification, as of IEEE 1003.1-2017. Namely,
POSIX_OPEN_MAX. CONFIG_POSIX_MAX_OPEN_FILES is being deprecated
for the same reason.
To mitigate any possible layering violations, that option is
not user selectable. It tracks the newly added
CONFIG_ZVFS_OPEN_MAX option, which is native to Zephyr.
With this deprecation, we introduce the following Kconfig
options that map directly to standard POSIX Option Groups by
simply removing "CONFIG_":
* CONFIG_POSIX_DEVICE_IO
Similarly, with this deprecation, we introduce the following
Kconfig options that map directly to standard POSIX Options by
simply removing "CONFIG":
* CONFIG_POSIX_OPEN_MAX
In order to maintain parity with the current feature set, we
introduce the following Kconfig options.
* CONFIG_POSIX_DEVICE_IO_ALIAS_CLOSE
* CONFIG_POSIX_DEVICE_IO_ALIAS_OPEN
* CONFIG_POSIX_DEVICE_IO_ALIAS_READ
* CONFIG_POSIX_DEVICE_IO_ALIAS_WRITE
Gate open(), close(), read(), and write() via the
CONFIG_POSIX_DEVICE_IO Kconfig option and move
implementations into device_io.c, to be conformant with the
spec.
Lastly, stage function names for upcoming ZVFS work, to be
completed as part of the LTSv3 Roadmap (e.g. zvfs_open(), ..).
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The POSIX_CLOCK option does not correspond to any standard
option. It was used to active features of several distinct
POSIX Options and Option Groups, which complicated API and
application configuration as a result.
POSIX_CLOCK is being deprecated in order to ensure that Zephyr's
POSIX Kconfig variables correspond to those defined in the
specification, as of IEEE 1003.1-2017.
Additionally, CONFIG_TIMER is being deprecated because it does
not match the corresponding POSIX Option (_POSIX_TIMERS).
With this deprecation, we introduce the following Kconfig
options that map directly to standard POSIX Option Groups by
simply removing "CONFIG_":
* CONFIG_POSIX_TIMERS
Similarly, we introduce the following Kconfig options that
map directly to standard POSIX Options by simply removing
"CONFIG":
* CONFIG_POSIX_CLOCK_SELECTION
* CONFIG_POSIX_CPUTIME
* CONFIG_POSIX_DELAYTIMER_MAX
* CONFIG_POSIX_MONOTONIC_CLOCK
* CONFIG_POSIX_TIMEOUTS
* CONFIG_POSIX_TIMER_MAX
In order to maintain parity with the current feature set, we
introduce the following Kconfig options that map directly to
standard POSIX Option Groups by simply removing "CONFIG_":
* CONFIG_POSIX_MULTI_PROCESS - sleep()
Similarly, in order to maintain parity with the current feature
set, we introduce the following additional Kconfig options that
map directly to standard POSIX Options by simply removing
"CONFIG":
* CONFIG_XSI_SINGLE_PROCESS - gettimeofday()
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Remove the `_MAC` part because those Kconfig options enable only hash
algorithms, nothing MAC-related, and the `_ENABLED` part to align the
naming to the Mbed TLS defines (plus we don't need such a part).
As a bonus, enabling SHA-256 does not automatically enable SHA-224
anymore.
See the migration guide entries for more details on the practical
changes.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The wpas_to_wifi_mgmt_diconn_status() was missing "s" char,
so name it to wpas_to_wifi_mgmt_disconn_status() as that is
more descriptive.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Handle scan results event in order to avoid warning print
for unhandled event. The event is not used for anything atm,
this just prevents unknown event printout.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Support BSSID configuration while setting up the network information
as part of the connect command processing.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Channel 14 in JP is still allowed (though OFDM is disabled), this wasn't
handled by operating class 81, so, add 82 to the list.
We still need to full implement regulatory support in the WPA
supplicant but that is handled in separate fix.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This makes it readable and also scalable for upcoming extension of
operating classes.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Comment out mbedtls symbols that do not have a proper Kconfig
setting. Future commits will need to add relevant support in mbedtls
side to provided needed symbols so that they can be used in hostap
and uncomment these.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
To cater for different needs add an configuration options for WPA
supplicant network selection (scan results sorting). The default is
still left unchanged.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If user selects a band, then we should restrict scanning channels to
that band, but using freq_list will only filter the results.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Make sure to copy LEN -1 bytes to the destination, to
accommodate the terminating null byte.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Even if the interface is not in connected state, allow disconnect to be
accepted, this behaviour regressed when the mode check was introduced
and if not connected then SSID will be NULL.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If MbedTLS uses its own heap which is a static heap (not libc heap),
then WPA supplicant heap usage will come down, so, reduce 8K (minimum
MbedTLS heap for Wi-Fi) from the libc heap size.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Free the deep copied data of the association response event.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Using a macro here that can potentially limit the interface name
compared to add can lead to issues, so, to mimic what we do in add, use
the sizeof with a boundary check.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
These were missed earlier, and if event send fails, no point in waiting
for the state to change.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Due to AP-MLME being in the host and expensive computation WPA3 is not
working reliably, so, for now this is being disabled.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
SAP mode adds more functionality that increases the heap usage, based on
experiments, 40000 works well to avoid startup failures.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Now that TX status buffer is allocated on heap by Zephyr driver, free
the buffer once its processed.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
For WPA_SUPP_CRYPTO_LEGACY, MBEDTLS_PKCS5_C is needed.
Signed-off-by: Vidar Lillebø <vidar.lillebo@nordicsemi.no>
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add missing MBEDTLS_PK_C dependcy for legacy crypto.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Key management for SAP should be retrieved from the network block rather
than using the per-interface global structure.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
By default (-1) libc uses all the available heap, this is good to
efficiently use the RAM, but for scenarios which there isn't enough RAM
the build will be success, but we see runtime failures.
Reserved the necessary RAM based on tests ahead to catch such scenarios,
of course this would mean that we might be no using full RAM in case
more is left, but that's never the case the with Wi-Fi :).
And this also adds the constant evaluation and fine tuneing like we do
for kernel heap and other parameters.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The timeout should be 5s, not 50s. Fix and rename the variables to
better reflect their meaning.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The PSA is referring to Kconfig symbols that are only found
in Nordic downstream repo so we cannot use it anyway atm.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This avoid compliance warning
Found pointless 'menuconfig' symbols without children. Use regular 'config'
symbols instead. See
https://docs.zephyrproject.org/latest/build/kconfig/tips.html#menuconfig-symbols.
WIFI_NM_WPA_SUPPLICANT modules/hostap/Kconfig:8
WIFI_NM_WPA_SUPPLICANT modules/hostap/Kconfig:8
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The big cherry-picking left some invalid code so remove/fix
it in order to pass the compilation.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Due to a typo, channel and frequency were compared causing the
connection to fail for any combination.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Use the WPA cli command to disconnect a station in AP mode.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The WPA version was only been set for WPA-PSK and WPA2-PSK, but for
others it wasn't set. For AP mode this causes issues as WPA-IE is
considered and WPA3/WPA2-PSK-256 aren't allowed, they need RSN.
Explicitly set the version for all to RSN, except for WPA-PSK.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
For AP we should use the security mode from the SSID as stations can
have a different security than the configure one. E.g., WPA/WPA2 in AP
vs WPA in STA1 and WPA2 in STA2.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
If the interface is in associated state, then current SSID will always
be set, so, add an early check and use SSID info freely after that.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This way we reject disconnect in AP mode and ap disable in STA mode,
though both have same functionality we treat them differently to keep
it clean.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
These are to intimate the applications about connected Stations.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
These events are used by AP mode, tied to AP-ENABLED and AP-DISABLED
events in the hostapd/wpa_supplicant.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
These can be abstracted from the core WPA supplicant.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The management frame structure in the WPA supplicant only has a pointer,
so, it need a deep-copy before passing it to WPA supplicant, else driver
ends up freeing causing invalid memory contents.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
RSSI should only be retrieved for STA mode, but the check was wrong.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The keyword is added into array argv of wpa_cli.
The commands which require to be interactive
this keyword will allow ro print output for them.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
Before starting AP mode, we don't need to search for existing networks
and join them, as the use-case is starting SoftAP.
This speeds up the AP mode operation significantly.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
RSSI is only applicable for STA mode, as for AP there are multiple
peers. This causes failure and unnecessary delay, so just skip the
retrieval.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If user enables AP mode, make sure CONFIG_AP symbol
is enabled so that access point sources get compiled etc.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
WPA supplicant handle is not used anymore.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This prepares for the upcoming AP mode support and moves re-usable code
to a common helper function.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
These were missed in the original support.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of assuming that the array is perfectly aligned with enum, moved
to a data driven design, this decouples from the enum numbering and also
helps avoid repetition of the event string while parsing.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This is a implementation gap and shouldn't be exposed to customers.
But when we run with debug it still helps to identify any important
events that are not handled.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Use the newly added enumerations to translate from WPA supplicant status
codes to Zephyr Wi-Fi management status codes.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Use the newly added enumerations to translate from WPA supplicant status
codes to Zephyr Wi-Fi management status codes.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Using "%02x" needs an unsigned integer, but all MAC addresses use
"unsigned char/char" as the data type, so, to avoid warnings, use a
temporary array.
Also, the macro from the WPA supplicant doesn't use the address of the
array element and causes warnings, so re-define the macro with address
of the element.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If the WPA supplicant internal event has a MAC address, and the sample
is compiled with newlib-nano then then the parsing fails because of lack
of support for C99 formatting options in nano [1].
Fix this by using supported specifier, even the code that encodes the
message uses the same format specifier.
[1] - https://docs.zephyrproject.org/latest/develop/languages/c/newlib.html#formatted-output
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Enabling a network would trigger a scan. Since frequency is being
set after enable_network, first scan is issued without any
specific frequency.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
WPA-PSK was added a bit late, so, it wasn't properly implemented, use
both key management and protocol version to properly handle WPA-PSK in
both connection and also in the status.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
MBO and WMM-AC are mandatory for WFA certification, so cannot be
disabled for memory saving.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
wpa_supplicant has a lot of entries, and it appears in the top-level menu.
Let it be a menuconfig, so that it gets its own menu page with
all the options, instead of expanding in the top-level menu when
selected.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If a user provides both band and channel then check if they are
compatible or not.
Also, move the multiple remove network cleanup to goto.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
By default Wi-Fi works on all bands, so, the band will be unknown, in
which case no need to configure a specific frequency list to WPA
supplicant.
Only when a use provides a specific band then this is needed.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This allows the WPA supplicant to build using the builtin MbedTLS.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If a specific band is configured, automatically fetch and configure the
supported channels.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
For a memory constrained system, basic Wi-Fi is enough, so, add a
configuration option to compiled out advanced Wi-Fi features.
This also supports choosing individual features if needed.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This should solve latency issues with using system workqueue and can now
closely implement the configured timeout.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The macro for crypto has been renamed (and as a choice), so, use the
new macro to see if the crypto has been enabled.
Fixes WPA2/WPA3 association.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This hardly saves flash but helps us in doing PSA port stagewise,
personal first and then enterprise.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Due to a bug in Kconfig, both legacy and PSA crypto were enabled
earlier, so, the dependencies for PSA were missed as they were provided
by legacy.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This set of changes introduces an API to set the channel when
the device is working in independent Monitor or TX injection mode
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This set of changes brings in packet filter API for Monitor and
promiscuous mode operation
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This change provides mode setting API to hostap module.
Signed-off-by: Vivekananda Uppunda <vivekananda.uppunda@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The control interface is initialized on every interface add but only
de-initialized on WPA supplicant termination. This leaks all cleanups in
the control interface dei-init.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Enable the PSA key type which enables AES block cipher support.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Fix PSA dependency on random number support.
Random number generated is wanted, instead of a specific PRNG algorithm.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
We need to use PSA MbedTLS template to get entropy working.
Rather than having a single set of options which makes dependency
management tough, have a separate entry for PSA based MbedTLS which
is enabled by for NS variants only.
Also, don't use MbedTLS APIs for entropy, instead use the Zephyr APIs
that can work for both NS and S builds.
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The following commits will re-introduce functionality that
the earlier commit removed, so revert the earlier commit.
This reverts commit 64423e269e.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Some crypto Kconfig options were commented out, so remove them.
These will be re-introduced later when adding crypto support
properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Compliance checker does not allow compile definitions without
a Kconfig option. So add dummy values for time being. These should
be removed at some point and replaced with properly namespaced
options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Zephyr compliance checker does not like macros that have control
structures like goto. So change the macro to align with this rule.
Also rename the macro and remove the __ prefix as it not needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Zephyr requires that the name of the variable is not the
same as the struct as seen by this warning:
modules/hostap/src/supp_api.c:64:WARNING:
Violation to rule 5.7 (Tag name should be unique)
tag: wpa_supp_api_ctrl
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If the DHCPv4 is disabled, then avoid linking warning about
missing DHCPv4 functions. Also include dhcpv4.h so that the
DHCPv4 function prototypes are found by the zephyr supplicant
driver.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Changed the names of the API functions between wpa_supplicant
and Zephyr upper layers. For example replaced the z_ prefix
by zephyr_ as the z_ is only meant for internal kernel
functions.
Changed the wpa_supplicant startup so that we do not poll
but wait the network interface add event which then adds
the network interfaces to the supplicant.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
There is no need to hide the wpa_supplicant interface
struct so add it directly to net_wifi_mgmt_offload struct.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add new files from hostap to Zephyr build.
Add wifi mgmt thread that communicates with supplicant.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Moving the Zephyr specific config options from
modules/hostap/Kconfig to corresponding Kconfig where the
option is specified.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Only adds basic build support using Zephyr. Crypto support is disabled
till the MbedTLS integration is complete.
Signed-off-by: Sridhar Nuvusetty <sridhar.nuvusetty@nordicsemi.no>
Signed-off-by: Sachin Kulkarni <sachin.kulkarni@nordicsemi.no>
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
Signed-off-by: Krishna T <krishna.t@nordicsemi.no>
