... so that a clear devicetree error is reported when the pinctrl-names
property is missing, not a quite cryptic compilation error about an
undeclared PINCTRL_STATE_*_UPPER_TOKEN symbol in pinctrl.h.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit introduces the ability to set the CAN
interface from command-line. This is helpful
if we want to run multiple instances of the app
with different CAN interfaces without making
separate compilations for each instance.
Signed-off-by: Kacper Dalach <dalachowsky@gmail.com>
Deprecate the CAN controller bus-speed/bus-speed-data properties and rename
them to bitrate/bitrate-data to match the terminology used in other CAN
devicetree properties and the CAN subsystem API.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The native Linux CAN driver supports CAN FD. Change the binding to reflect
this. No functional changes.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The CAN loopback driver supports CAN FD. Change the binding to reflect
this. No functional changes.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Include reset device binding in some of the NXP LPC
IP bindings to be able to add the resets property.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Remove all CAN controller "bus-speed" and "bus-speed-data"
properties. These all use the default bitrates set via Kconfig.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Set the default initial bitrates globally via Kconfig. The initial bitrates
can still be overridden using the "bus-speed" and "bus-speed-data"
devicetree properties.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Remove the unused "tx-delay-comp-offset" property from the base CAN FD
controller devicetree binding.
Having a static Transmitter Delay Compensation (TDC) offset is useless.
The offset needs to match the data phase timing parameters in order to
properly configure the second sample point when transmitting CAN FD frames
with BRS enabled.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Remove all optional, initial CAN sample point properties and rely on the
CAN timing calculations to automatically pick the preferred sample point
location based on the initial bitrate.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Make the properties for setting the initial sample points for both the
classic/arbitration phase and the data phase optional.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Some CAN transceivers have a lower limit on their supported bitrate. Add an
optional "min-bitrate" for specifying this limit via devicetree.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Utilize a code spell-checking tool to scan for and correct spelling errors
in all files within the dts/bindings/bluetooth, can, dac and display.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Adds CAN drivers for XMC4xxx SoCs.
XMC4xxx has multiple CAN nodes. The nodes share a common clock and
a message object pool.
The CAN nodes do not have a loopback mode. Instead there is an
internal bus which can be used to exchange messages between
nodes on the SoC. For this reason tests/samples which rely on the
loopback feature have been disabled.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Add support for specifying the domain/kernel clock along with a common
clock divider for the STM32H7 CAN controller driver via devicetree.
Previously, the driver only supported using the PLL1_Q clock for
domain/kernel clock, but now the driver defaults to the HSE clock, which is
the chip default. Update existing boards to continue to use the PLL1_Q
clock.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Switch to using named IRQs as index-based access makes no guarantees about
devicetree interrupt order.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Switch to using named IRQs as index-based access makes no guarantees about
devicetree interrupt order.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename the native Linux SocketCAN driver to reflect that it can can now be
used in both native_posix and native_sim (with or without an embedded
C-library).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Unify spelling of CAN Flexible Data-rate abbreviation to "CAN FD" instead
of "CAN-FD". The former aligns with the CAN in Automation (CiA)
recommendation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Reword the descriptions for the bus-speed, sample-point, bus-speed-data,
and sample-point-data CAN controller devicetree properties.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This continue PR #31270. The updated changes are:
- Updated to work with latest zephyr
- Inplace reads/writes of registers
- Batch read of RX messages when multiple messages can be read
- FIFO abstraction of RX/TEF queues
- Handle ivmif errors
- Use READ_CRC for register reads
- Use bitmasks instead of bitfield members
- Rename mcp25xxfd to mcp251xfd
- General cleanups
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Update the descriptions for the various CAN devicetree timing properties
specified in Time Quanta (TQ) to make it clear that these, if present, are
only used for the initial timing parameters.
Deprecate the (Re-)Synchronization Jump Width (SJW) devicetree properties
for both arbitration and data phase timing as these are now only used in
combination with the other TQ-based CAN timing properties, which are all
deprecated.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Use clock control API to retrieve the module's frequency and
update the boards using it to provide the source clocks.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Deprecate the advanced CAN timing devicetree properties in favor of setting
advanced timing parameters from application code.
The advanced timing properties are giving in number of time quanta (Tq) and
requires reverse-calculation to find a suitable CAN clock divider. The
resulting bitrate error is compared against a threshold in the driver
initialization code, but the application is not able to retrieve it.
Forcing applications to use the CAN timing APIs directly instead makes it
up to the application to determine if the bitrate error is acceptable or
not.
The deprecated properties are:
- prop-seg
- phase-seg1
- phase-seg2
- prop-seg-data
- phase-seg1-data
- phase-seg2-data
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add devicetree binding for the TI TCAN4x5x series of CAN controllers. These
CAN controllers are based on the Bosch M_CAN IP and interfaced via a SPI
bus.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename the STM32 bxCAN driver DTS compatible, Kconfig symbol, and
implementation file to match the naming used in the ST reference manuals.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Restructure the Bosch M_CAN driver backend to use per-instance Message RAM
configuration.
This removes the need for a common, artificial "can" devicetree node for
SoCs with multiple Bosch M_CAN-based CAN controllers and allows for
per-instance configuration of the number of e.g. standard (11-bit) and
extended (29-bit) filter elements.
As part of the restructure, software handling of CAN filter flags was moved
from per-flags bitfields to per-filter bitfields, solving an issue when
using more than 32 standard (11-bit) filter elements or more than 16
extended (29-bit) filter elements.
Fixes: #42030, #53417
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Switch the Bosch M_CAN devicetree binding to use a bosch,mram-cfg property
for specifying the memory layout of the Bosch M_CAN Message RAM. This is
identical to the Linux kernel devicetree binding for Bosch M_CAN IP core
based CAN controllers.
This introduces an offset cell which can be used for controllers with
shared Message RAM between Bosch M_CAN instances.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Driver was based on can_sam. SAMC21 has only 1 interrupt for one
can "output", so can interrupt has to executes two lines of
interrupts.
CAN is configured to use OSC48M clock via GLCK7. GLCK7 is set
by divider configured from dts.
Signed-off-by: Kamil Serwus <kserwus@gmail.com>
This patch introduces support for NXP S32 CANEXCEL (CANXL) peripheral.
CAN protocol supporting:
- CAN classic
- CAN FD
Remote transmission request is not supported as this feature is not
available on NXP S32 CANXL HAL.
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
Add a devicetree binding for the CAN-FD capable variant of the NXP FlexCAN
controller. Add example devicetree snippets to both NXP FlexCAN and NXP
FlexCAN-FD binding documentation to limit confusion.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename the nxp,kinetis-flexcan devicetree compatible to nxp,flexcan as it
is not specific to the NXP Kinetis series.
This is preparation for adding a nxp,flexcan-fd binding.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
DTS property attributes are (by default) not required.
Explicitly specifying `required: false` is redundant.
Perhaps a warning to that effect would be useful.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Use the new PCIe core infrastructure for looking up the BDF at runtime
based on the VID/DID values.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Newer ESP32 series MCUs like the ESP32-C3 contain some register changes
incompatible to the original ESP32 and the SJA1000.
The additions in this commit consider these changes and fix the
incompatibilities in the TWAI front-end for the SJA1000 driver.
Signed-off-by: Martin Jäger <martin@libre.solar>
This driver provides an interface to SocketCAN interfaces of the Linux
system running a Zephyr application with the native_posix board. These
interfaces may be virtual or actual CAN buses.
Signed-off-by: Martin Jäger <martin@libre.solar>
Remove the CAN_STM32FD_CLOCK_DIVISOR configuration option,
and add configuration via dts property clk-divider instead.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
