`-` is preferred over `_` in devicetree property names.
Since, change `clk_src`, `clk_div`, and `clk_out_div` to
`clk-src`, `clk-div`, and `clk-out-div`.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
The "channels-num" should not be used here, other system's parts are using
"channel-count" instead for the same purpose.
Also property's description has been сorrected.
Signed-off-by: Andrey VOLKOV <andrey.volkov@munic.io>
Allows MSTP register addresses to be changed in the device tree
to support different configuration SoCs.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Background of this modification is to make clock control
driver code provided by Renesas vendor to support for Renesas MCU
on Zephyr.
Signed-off-by: Quy Tran <quy.tran.pz@renesas.com>
Initial commit for entropy support on RA8
- drivers: entropy: implementation for TRNG driver of RA8x1
- dts: arm: add device node for trng of RA8x1
- boards: arm: enable support zephyr_entropy for ek_ra8m1 and
update board documentation
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
Background of this modification is to make clock control
driver code provided by Renesas vendor to support for Renesas MCU
on Zephyr.
Signed-off-by: Quy Tran <quy.tran.pz@renesas.com>
- Initial support for RA6M2 SoC
Signed-off-by: Tri Nguyen <tri.nguyen.wj@bp.renesas.com>
Signed-off-by: Danh Doan <danh.doan.ue@bp.renesas.com>
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
Background of this modification is to make gpio driver code
provided by Renesas vendor to be an official support for Renesas
MCU on Zephyr
Signed-off-by: Quy Tran <quy.tran.pz@renesas.com>
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
Update pinctrl driver which used for Renesas RA series with
PFS secure register
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
Signed-off-by: Quy Tran <quy.tran.pz@renesas.com>
Initial commit to suppor RA8D1 SoC
This is deveop base on RA8M1 so it will have similar stucture and
feature
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
This update is to support clock API for RA8
Move the clock initialize function into clock driver
Peripheral clock now has 2 more property in clock cell for enable
and disable clock to peripheral module
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
Add support for the EK RA8M1 board
This board is using Renesas RA8M1 MCU.
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
This is the initial commit to support for gpio driver
for RA8M1 MCU, the coding is base on renesas fsp hal
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
This commit should deal with updating
the way USBD was handling the DMA
engine. Based on the #73803 request
DMA should be handled via the DMA
driver API class and not directly.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
This commit should address the #73803 issue
where the DMA node does not provide support
for the #dma-cells binding. Peripherals should
specify one or more DMA channels via the dmas
and optionally dma-names DT properties.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
This commit should deal with optimizing device's
operation in terms of power consumption. In this
context:
1. Power and rail managers are enabled so that the
device can enter the sleep state and power
rails be set to the min. required levels.
2. Peripheral blocks should be enabled only when
there is need to do so.
3. Define the internal RCX oscillator as default
low power clock. RC32K should not be used as
it drifts significantly due to temperature and
voltage variations. Thus, affecting the whole
system stability regardless of its calibration.
4. PLL should be enabled only when requested and
on board level LP clock should be switched to
XTAL32K to avoid overhead due to RCX calibration.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
UART2 and UART3 (unlink UART) do support hardware flow control.
This simply add necessary flag that is already handled in the code.
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
This enabled extended sleep for Renesas SmartBond(tm).
Extended sleep is low power mode where ARM core is powered off and can
be woken up by PDC. This is default sleep mode when CONFIG_PM is
enabled.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Signed-off-by: Jerzy Kasenberg <jerzy.kasenberg@codecoup.pl>
Add common gpio node to pinctrl node (interrupts are shared between ports)
and syscon for interrupt edge detection register in order to support
interrupts in rzt2m gpio
Signed-off-by: Jakub Michalski <jmichalski@internships.antmicro.com>
Remove all optional, initial CAN sample point properties and rely on the
CAN timing calculations to automatically pick the preferred sample point
location based on the initial bitrate.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Define a single node that reflects the LCDC IP. Instead of defining
the same IP block twice with different compatibles (mipi dbi, display)
we define a single node for the default display interface and
other interfaces like the MIPI DBI should override the compatible entry
with the appropriate one within its DTS overlay file.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
Create a folder for RZ Renesas range device tree to follow how it's
done for other renesas ranges.
It will also help to better delimit areas to maintain.
Signed-off-by: Aymeric Aillet <aymeric.aillet@iot.bzh>
