For code clarity, this commit adjusts the use of `return` statements
in functions with a void return type as follows:
- Transform `return foo();` into separate statements:
`foo();`
`return;`
- Remove unnecessary `return` statements when
they don't affect control flow.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
- enabled combined interrupt configuration for stm32u0x serie.
- since stm32u0 serie doesn't support SMBUS we need to avoid
use SMBHEN and SMBDEN bits register.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
Remove all entries that as not being used.
This also update hal to re-enable warning flags
as such as -Wno-unused-variable.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
A warning was issued in the build as the rtio tx and tiny_tx buffer
pointers are now labeled const. The internal API expects mutable buffers
so an explicit cast is needed here to avoid the warning.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Use the RTIO work queue to fake the i2c submit calls for drivers which
haven't yet implemented the API. Applications can change the size of
the work queue pool depending on how much traffic they have on the buses.
Signed-off-by: Yuval Peress <peress@google.com>
Initialise the semaphores in the init function so that a copy of the
data structure does not need to exist in `.data`.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Select PINCTRL subsystem by drivers which require it.
Prevent the need from enabling this symbol at board or soc level.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Route `configure` and `recover_bus` through the RTIO framework to avoid
race conditions. Update `RTIO_OP_I2C_RECOVER` implementation to actually
recover the bus, instead of triggering a loop.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Add checks to return value of esp_intr_alloc to avoid drivers init
returning 0 when interrupt allocation fails.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Build was failing due to const variable being passed as function param
accepting non-const variable discarding const qualifier. Explicitly cast
to fix the build issue.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add power management support for Apollo3/Apollo3P I2C, and
automatically enables device runtime power management
Signed-off-by: Zhengwei Wang <zwang@ambiq.com>
Transmit/write buffers are expected to be constant values given to the
operation to transmit but not mutate. Seperate the OP_TX and OP_RX
operation description unions.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
MAX32 I2C peripheral can benefit from DMA transfers. This patch adds
DMA support for transactions made in controller mode.
Signed-off-by: Tahsin Mutlugun <Tahsin.Mutlugun@analog.com>
REG_X_BASEADDR will be removed from all hal files.
This forces the use of the peripheral base address
Define MSPI_PORT macro for chip drivers
Signed-off-by: Richard Wheatley <richard.wheatley@ambiq.com>
Update i2c_emul.c to support i2c_target_register and i2c_target_unregister
function calls as well as support address forwarding in emulation.
Address forwarding helps us test IPCs in native sim. Instead of having to
emulate 2 separate cores, we can forward read/write requests from one bus
to another bus (effectively creating a loop). This way the same image can
simulate both the controller and the target.
Signed-off-by: Yuval Peress <peress@google.com>
The I2C API itself now enforces last msg stop, remove duplicate code
from driver.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
The I2C API itself now enforces last msg stop, remove duplicate code
from driver.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
The I2C API itself now enforces last msg stop, remove duplicate code
from driver.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
The I2C API itself now enforces last msg stop, remove duplicate code
from driver.
Signed-off-by: Bjarki Arge Andreasen <bjarki.andreasen@nordicsemi.no>
When using the eeprom_target in 16-bit mode on rp2040, some issues in the
addressing have been observed where the read was executed before all writes
where finished.
Signed-off-by: Manuel Aebischer <manuel.aebischer@netmodule.com>
Converts the `<inf> i2c_ll_stm32_v2: I2C TIMING` message
displayed by the driver to a LOG_DBG. Also makes an actual
error message a LOG_ERR instead of a LOG_DBG.
Signed-off-by: Glenn Andrews <glenn.andrews.42@gmail.com>
Solves two identical issues listed below:
Issue 1: I2C scanner example for DesignWare hardware gets stuck
indefenitely resulting in system hang up.This is because DW I2C driver
does not handle 0 byte transfer correctly which is the case for I2C
scan example.
Fixed it by overwriting the msg length to 1 if it is 0 and the
buffer is not NULL.
Issue 2: Similarly, if the I2C pins are not pulled up (nothing connected
to I2C pins), the DW hardware does not actually send the data
(assuming contention on the bus) hence not releasing the semaphore
resulting in calling thread waiting forever.
Fixed it by adding a timeout to k_sem_take call and return error if
cannot successfully acquire it.
Tested scenarios where nothing was connected on the bus and saw the
I2C scan example complete the whole scan command. Then connected
two different sensors on the I2C bus and saw both the address on the
console. Tested both the uses cases on Raspberry Pi Pico.
Fixes#70332.
Found that micropython tackles the same issue by implementing I2C scan
commands with Soft I2C because the same reason mentioned in Issue 1.
Signed-off-by: Dev Joshi <quic_devbhave@quicinc.com>
Removed PM device runtime support from drivers in PD_SYS domain.
Update the rest device drivers to call pm_device_runtime_get/put()
functions when CONFIG_PM_DEVICE_RUNTIME is enabled.
Signed-off-by: Ioannis Damigos <ioannis.damigos.uj@renesas.com>
I/O Devices were meant to be handles of sorts and had a built in mpsc queue
as this made sense initially. As time has gone on it turned out that often
we wanted the mpsc queue to be an implementation detail hidden in a driver.
In fact pretty much all drivers work this way now.
Keeping the struct mpsc queue as a member of rtio_iodev meant wasted memory
in cases where it wasn't used. It also meant a bit of confusion as the
queue might be accidently used in places where it shouldn't be.
Remove the mpsc queue member from struct rtio_iodev and the last remaining
usages of it. Will ensure RTIO for 3.7 LTS avoids causing unneeded churn
for future users.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Change the get_config API for the stm32 I2C V2 driver.
It will also return the value of the content of TIMING register
for the I2C V2 bus.
This is hold by a i2c_config_timing structure of the device data
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Define Macro to fix the compliance check warning :
"DEEP_INDENTATION: Too many leading tabs - consider code refactoring
in the i2c_compute_scll_sclh() function
in the i2c_compute_presc_scldel_sdadel() function
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This PR is implementing a new formula to calculate the I2C timing
value from the I2C clock source and the bit rate.
This is done under flag CONFIG_I2C_STM32_V2_TIMING.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Moves the rtio_ prefixed lockfree queues to sys alongside existing
mpsc/spsc pbuf, ringbuf, and similar queue-like data structures.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
The controller should be considered
inactive when TX/RX FIFOs are empty
and there is no data in SPI_RX_TX_REG.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
Add build-time assert to check if the size defined is actually addressable.
i.e: if address-width is set to 8, the maximum addressable size is 256
bytes.
Signed-off-by: Bram Vlerick <bram.vlerick@openpixelsystems.org>
Add a parameter to allow the configuration of the number of address
bytes used by the I2C master. This allows the driver to expose larger
buffer sizes.
Tested with standard linux at24 driver.
Signed-off-by: Bram Vlerick <bram.vlerick@openpixelsystems.org>
This commit should add all the functionality needed for the I2C
driver to work when PM is enabled.
Signed-off-by: Ioannis Karachalios <ioannis.karachalios.px@renesas.com>
Namespaced the generated headers with `zephyr` to prevent
potential conflict with other headers.
Introduce a temporary Kconfig `LEGACY_GENERATED_INCLUDE_PATH`
that is enabled by default. This allows the developers to
continue the use of the old include paths for the time being
until it is deprecated and eventually removed. The Kconfig will
generate a build-time warning message, similar to the
`CONFIG_TIMER_RANDOM_GENERATOR`.
Updated the includes path of in-tree sources accordingly.
Most of the changes here are scripted, check the PR for more
info.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
