Adds a basic driver for the STM32WB0 flash controller (read/erase/write).
Extended operations are not supported by this driver.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Can be used only once the SiM3U SoC support has been added.
Developed-by: Michael Zimmermann
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
The ATXP032 is a NOR flash device that supports up to ~100MHz
octal SDR/DDR with 4MB nonvolatile memory.
The device driver uses MSPI bus API and could be used across different
SoC controllers that implement the MSPI bus API.
Signed-off-by: Swift Tian <swift.tian@ambiq.com>
Add the support of the stm32h7rs serie to the flash stm32h7 driver
Remap Flash registers to the stm32h7rs serie.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The commit adds two new API calls:
- flash_fill - that allows to fill selected part of device with
specified value;
- flash_flatten - that allows to erase or fill device with
erase_value, depending on whether driver for the device provides
erase callback.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Introduce a XSPI driver to cover the common XSPI peripherals
of the stm32 mcu: X is for single or quad or octo or hexa
SPI bus access to external memories
DMA not supported in this version
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add Nuvoton numaker series flash memory controller(RMC) with erase,
read & write features of soc-flash.
Signed-off-by: cyliang tw <cyliang@nuvoton.com>
Added a simple driver for RRAM. It is implemented as a flash driver,
because the "RRAM eFlash" macro obeys flash-like constraints.
Although users are not required to erase before write.
Signed-off-by: Jakub Zymelka <jakub.zymelka@nordicsemi.no>
Support SFDP probe in flexspi nor driver. This probe will allow the
flash driver to dynamically configure quad spi flashes for 1-4-4 mode,
expanding the flash chips supported with this driver.
The following data is read from the SFDP header:
- quad enable method
- fast read command (1-4-4 is maximum supported)
Fixes#55379
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
When Bluetooth is enabled, it is required to arbitrate flash accesses
between RF and write accesses (for user activity).
A dedicated flash manager is provided as part of STM32WBA BLE lib.
Implement a dedicated driver using FM Apis to handle RF activity.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Add support for flash NOR memory devices on a NXP S32 QSPI bus. The
driver uses a fixed LUT configuration assuming a default standard page
size and erase types, and allows to select between multiple read/program
instructions/modes. It is also possible to read the flash device
characteristics from the device at run-time as long as the memory is
JESD216 compatible, providing more flexibility.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Add Nuvoton numaker series flash memory controller(FMC) with erase,
read & write features of soc-flash. Also update Nuvoton manifest
to include zephyrproject-rtos/hal_nuvoton#6.
Signed-off-by: cyliang tw <cyliang@nuvoton.com>
This CL attempts to implement npcx's flash driver instead of the
original one (npcx spi driver plus spi_nor flash driver).
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Refactor the part of the flash simulator that interacts with the
host when build for native platforms, so it is possible to use
it also with the embedded libCs.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This adds a few line use zephyr_syscall_header() to include
headers containing syscall function prototypes.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
- Added initial version of Infineon CAT1 Flash driver
- Added binding file for infineon,cat1-flash-controller.yaml
- Added overlays for subsys/nvs and drivers/flash_shell
to support cy8cproto_063_ble, cy8cproto_062_4343w boards
- Defined erase-block-size in PSoC6 MPN dtsi.
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
This patch adds sector write protection support for STM32F4 devices
family. These devices can protect flash content with sector precision.
Write protection functionality was exposed as vendor extended operation.
To change write protection state, caller should provide mask of enabled
and disabled sectors.
Function responsible for locking/unlocking option bytes was implemented
for all STM32 devices supported by this driver.
Signed-off-by: Patryk Duda <pdk@semihalf.com>
Move the SoC Flash nRF sync ticker implementation into
Bluetooth Controller Subsystem folder, as internal headers
are included.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update usage of zephyr_code_relocate to follow new API. The old method
of relocating a file was the following directive:
zephyr_code_relocate(file location)
The new API for zephyr_code_relocate uses the following directive:
zephyr_code_relocate(FILES file LOCATION location)
update in tree usage to follow this model. Also, update the NXP HAL SHA,
as NXP's HAL uses this macro as well.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Now that compatible is directly linked with driver version,
use DT compat based Kconfig flag to build the correct flash driver
version.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Instead of introducing a vX driver version, use series name.
With this commit F0, F1, F3, L0 and L1 series are using F1 flash driver.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This supports three types GD32 FMC flash memory. GD32 FMC v1,
GD32 FMC v2 and GD32 FMC v3.
GD32 FMC v1 for small flash memory, flash size can be up to 512KB.
GD32 FMC v2 for large flash memory, flash size can be up to 3072KB.
GD32 FMC v3 not use page but sector as minimum block, flash size can
be up to 3072KB.
Signed-off-by: HaiLong Yang <hailong.yang@brainco.cn>
This adds flash driver for Renesas SmartBond(tm) family.
This technically uses QSPI controller but since default and most
commonly used configuration is to boot from external QSPI flash (DA1469x
do not have built-in flash) and that flash is mapped into memory space,
it can be represented as internal flash.
Signed-off-by: Andrzej Kaczmarek <andrzej.kaczmarek@codecoup.pl>
Signed-off-by: Ben Lauret <ben.lauret.wm@renesas.com>
This includes a basic driver for built-in flash on the Texas Intruments
SimpleLink CC13xx/CC26xx SoC series.
The driver makes use of driverlib HAL from TI's SDK and was tested on
two LaunchXL development boards with CC1352R and CC2652R SoCs:
- CC1352R1 LaunchXL
- CC26x2R1 LaunchXL
Tests were done using:
- flash shell sample (samples/drivers/flash_shell)
- littlefs filesystem sample (samples/subsys/fs/littlefs)*
- MCUboot (bootloader/mcuboot/boot/zephyr)*
* additional changes in DTS for the boards were required (partitions
table) and are not part of this changeset (will be introduced later)
Some additional information about the implementation:
1. TI's Technical Reference Manual for CC13x2 and CC26x2 points out that
"An individual 64-bit word can be programmed to change bits 1 to 0"
but it seems this 'alignment' requirement is handled internally by
the ROM function and thus 'write-block-size' is set to 1.
2. Interrupts, VIMS and line buffers are disabled during flash content
update (write or erase) and restored afterwards as recommended by TI.
3. Only RAM to flash write is supported (source of data to be written to
flash can't point to flash).
4. The driver doesn't take care of flash sector protection disable as
that functionality is handled by CCFG. Write or erase requests which
refer to a protected area will fail.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
This is the stm32 octospi driver based on the exisitng quadspi
for stm32 devices and source code from the STM32Cube.
This drivers initialized the peripheral and the NOR memory
in SPI or OctoSPI mode with STR or DTR data Transfer rates.
The NOR-flash can provide the SDFP table directly (if supported)
or through the DeviceTree.
Limitation: no DMA transfer.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Adds the stm32u5 flash controller driver for this serie
to the existing stm32l5 flash driver part
Only 1 or 2 MB devices exist today (4MB is possible in the future).
This flash controller driver is adapted from the flash_stm32l5.c
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This enables accessing the hyperflash through the flash api.
Added a feature to memc_mcux_flexspi that waits for flexspi bus to be
quiet.
Signed-off-by: Nicolai Glud <nicolai.glud@prevas.dk>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit adds flash driver in non-secure mode for stm32l5x
series with icache enabled. This commit also adds a flash
programming error status check applicable for all platforms
except stm32f1 series.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
The flash_stm32l4x driver seems to work out of the box on the WL series.
This just adds the necessary config changes to let the driver build and
run when SOC_SERIES_STM32WLX is selected.
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Add flash driver for it8xxx2. The driver can implement
flash read, write and erase that will be mapped to the
ram section for executing.
TEST="flash write 0x80000 0x10 0x20 0x30 0x40 ..."
"flash read 0x80000 0x100"
"flash erase 0x80000 0x1000"
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
This commit adds the flash driver for nucleo_f207zg platform.
This has been tested with flash test application.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Move LUT to driver.
Update CMake to include SoC specific driver.
Fix mimxrt685_evk LUT header spacing.
Signed-off-by: Saurabh Jagdhane <saurabh.jagdhane@nxp.com>
This change allows writing to the flash while running in XIP mode,
and enables mcuboot or NVS settings to be used on i.MX RT socs.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Initially the flexspi device only supported a flash driver for
external NOR flash. As the controller supports HyperBus devices,
which can be either volatile or non-volatile, the driver iss moved
to drivers/memc.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
